Used Shelf Frame for sale (8,828)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Dkodpfx Aajguk Dvj Njl The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Dodpfx Aomhh Dtsa Njkl Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the shelf panel: Racking system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material color: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight per piece: approx. 8.12 kg Max. load per shelf panel: 75 kg, with evenly distributed load. Your contacts at our company: Mr. Andre Evering Dedpfx Aaoyzmn Do Nskl Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item entails extra costs, which can be requested from us separately, depending on delivery location or scope.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Djdsy Aibcepfx Aa Nekl

Condition: used, Nedcon pallet rack approx. 3.1 linear meters, used 🧰 Product Features • Manufacturer: Nedcon • Color: Blue • Condition: Used, see photos • Frames: 2 units pre-assembled, 500 x 105 cm • Frame width: 10 cm • Beams: 8 units with 290 cm clear span • Safety pins: 16 galvanized safety pins • Anchoring: 8 Hilti concrete anchors • Load capacity: 2,000 kg per level • Bay load: 12,000 kg • Shelves included! Djdjy D Nybspfx Aa Nekl 💰 Price: €440 net excl. VAT • Quantity discount: On request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: Possible at any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: good (used), Year of construction: 2014, functionality: fully functional, Total load capacity: 15,000 kg, pull-out shelf capacity: 3,000 kg, dead weight: 4,830 kg, overall rack dimensions: approx. L/700/H/230/W/255 cm, shelf dimensions: approx. L/660/W/167 cm, with 5 pull-out shelves. Djdpfxey Hi Dxj Aa Nekl

Condition: good (used), functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained high-performance full frame saw Frame clearance: 710 x 735 mm Stroke: 600 mm Dsdpfx Asy D Hitea Njkl Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and blade suspension Drive motor and gear unit Electrical control cabinet with control system Splitter wedge type AVER, hydraulically driven In very good condition (optionally COMPLETELY REFURBISHED!) Top condition with remote-controlled tensioning carriage

Condition: good (used), Frame: 8860x1050x80 mm, 34 pieces 3000x1050 mm, 7 pieces Beams: 1860x75x45 mm (2800 kg/level), 352 pieces 2760x115x40 mm (2400 kg/level), 26 pieces 2700x100x50 mm (2400 kg/level), 22 pieces Partial quantities can also be purchased. Dkedpsd Hbqnjfx Aa Nel If you require racks or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to assist you with your planning. Providing you with a tailor-made offer is a matter of course for us. Shipping: Please request freight costs by providing your postcode, location, and the desired quantity of items.

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Djdpfxjyyqnfo Aa Njkl Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Dkjdpfxjt Eq E So Aa Nel Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Dedpfx Aaoyz T Anj Njkl Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: excellent (used), 1040 x 820 x 930 mm LWH Djdpoy Ec U Iefx Aa Nskl

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Dodey Avb Aspfx Aa Nokl Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Dkjdpsyywl Refx Aa Nol Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) Dkodpeyywi Aofx Aa Nol N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electrohydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Dodeyx Nubepfx Aa Nskl Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The above information is provided subject to change until the machine arrives at our warehouse. Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm Dsdpfxexfl Eae Aa Njkl year of manufacture 1994 with CE mark

Condition: excellent (used), Technical specifications: Dsdpfsw U Nvpex Aa Nokl Number of pistons: 6 Piston diameter: 140 mm Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm

Condition: used, We are offering used pallet racking for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Dksdpfx Aey Dgcmea Nel Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 safety pins Yellow bumper guards (upright protection) can be purchased for €5.00 per piece net. PRICES Net price: €1,115.68 Gross price: €1,327.66 (incl. VAT) Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be organized on request YOUR CONTACT PERSONS Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Extra costs depend on the destination and shipment volume and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the case of an order. The price stated is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK in Nordhorn specializes in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used pallet racks for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Bay load: 2,400 kg Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: - 4 frames - 12 beams - 2 locking pins The yellow collision protectors (upright protection) can be purchased for €5.00 each (net). Dkodpsy Dga Eefx Aa Nsl PRICES Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m of pallet racking Location: 14656 Brieselang – Transport can be arranged upon request YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be requested individually from us. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price stated is per unit/net price or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of intralogistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and trades. We continuously offer a range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks for success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm Dedpfjyuylnex Aa Njkl – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Dodpfxsh Dv Uqe Aa Nskl Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: good (used), Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, sewer ring lifters Dkjdohp A I Sspfx Aa Nsl -Manufacturer: Zagro, Hydraulic manhole frame lifter type HK 6 -Lifting round shafts: inner diameter of approx. 60 cm, outer diameter of approx. 78 cm -4 lifting cylinders -Transport wheels -Dimensions: 1400/1120/H1020 mm -Weight: 169 kg

Condition: used, Frame Saw Esterer S71 700 mm frame width 500 mm stroke with frequency-controlled feed with saw blades with hydraulic saw tensioner (+spare bar) with drive motor Dsdpsy Da Enofx Aa Njkl with intermediate gear with riving knife (Arta-C) Location: Germany, near Chiemsee

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Djdsyz Dxaepfx Aa Nokl