Used Show Mature Felgen for sale (1,715)

Condition: ready for operation (used), Mitsubishi / Mazak FX 702C BN624E577G51 circuit board, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfji Eb Hisx Ag Seuh

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Guedpfx Agju S An Ds Soh A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Guedpfx Aocnxrcsg Ssh Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment Guodpfer Hr D Nex Ag Soh The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) Gedpfx Asxyafkeg Seuh All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 236000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Gusdpfxey Dhrpe Ag Soh 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1965, Technical details: plate width: 2040 mm plate thickness: 2 mm Guodezp U Hbopfx Ag Ssh distance between columns: 2300 mm stroke adjustment: 2050 mm bending angle max.: 0-135° ° Knife length: 85 mm weight of the machine ca.: 1,7 t space requirements approx. LxWxH: 3,2 x 1,7 x 1,3 m Manual bending machine Max. adjustment of bending beam: 80 mm Bending blade shows heavy signs of use *

Condition: used, Year of construction: 2013, Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Gujdpfsz Et Uyjx Ag Soh Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed - Transparent safety doors and panels - KOSME touch panel with production statistics Condition Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, Year of construction: 2026, CORMAK TS250CL Table Saw The TS250CL is a high-quality table saw designed for professional users who require reliability, precision, and a compact machine design. The saw combines advanced technical solutions found in higher-class models with an accessible and practical format. It is an excellent choice for small woodworking workshops, furniture production, and craft applications, providing high cutting efficiency and excellent machining quality. Main Advantages of the Machine Maximum blade diameter of 254 mm – enables deep cuts at various angles. 2.2 kW (S1) / 3.1 kW (S6) motor – provides constant power even during intensive operation. Blade tilt adjustment from 90° to 45° – allows precise bevel and angled cuts. Compact construction – allows optimal use of limited workshop space. Stable and extended work table up to 1000 mm in length – ensures accurate material guidance. Efficient dust extraction system with 100/25 mm outlets – improves cleanliness and operator comfort. Construction and Technology The TS250CL table saw is built on a robust welded frame that provides excellent rigidity and resistance to vibration. The main mechanical components are manufactured from high-quality steel and cast iron, ensuring durability and long service life. The heart of the machine is a powerful induction motor with a continuous operating power of 2.2 kW (S1), supported by an increased power mode of 3.1 kW (S6), allowing efficient cutting of hard wood species and wood-based materials. The installed 254 mm carbide-tipped saw blade enables effective cutting with a maximum depth of 80 mm at 90° and 65 mm at 45°, meeting the requirements of most woodworking operations. The blade speed of 4000 rpm ensures clean and accurate cutting lines. Precision and Working Efficiency The combination of a rigid construction and a precise blade guidance system allows the TS250CL table saw to deliver repeatable and accurate results. Thanks to the possibility of extending the work table to a length of 1000 mm, large workpieces can be guided comfortably and safely. Applications The CORMAK TS250CL table saw is an excellent solution for: Woodworking workshops – for cutting solid wood, MDF boards, plywood, and laminates. Furniture manufacturers – where dimensional accuracy and high surface quality are essential. Craft workshops – as a versatile and compact table saw for professional use. Standard Equipment Circular saw blade 250 × 30 × 2 mm Work table extension Dust extraction outlets 100/25 mm Stops and guards ensuring safe operation Optional Equipment Parallel guide system Crosscut sliding carriage for repetitive cutting Dedicated dust extraction system Technical Specifications Parameter Specification Maximum blade diameter / bore 254 × 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 65 mm Maximum cutting depth at 90° 80 mm Cutting width with table extension 750 mm Maximum cutting length 1000 mm Dust extraction outlet 100/25 mm Work table dimensions 635 × 420 mm Work table dimensions with extension 635 × 1500 mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450 × 1000 × 1100 mm Please note!!! This is a display model and shows visible signs of assembly. No warranty and no returns. Gjdpfx Agez E Hm As Souh

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, overall weight: 990 kg, Technical Specifications Product Number HA 125 Year of Manufacture: 2010 Dimensions of the loading chamber: 115x115Wx560mm Height: 2000 mm Width: 1200 mm Length: 2200 mm Total Power: 7.5 kW Power Supply: Electrical: 400V 50Hz 5N Main Material: Stainless Steel, acid-resistant Max Weight: 970 kg Machine in perfect condition after servicing New hydraulic oil New safety sensor for the flap New bearings and seals in the main gearbox Possibility to produce cubes with dimensions: 29 x 29 mm – Or other dimensions depending on customer needs – We can change the blade spacing or add more blades Maximum cube length 70 mm, hydraulically adjustable Purpose: Slicing into slices, cubes, and strips Cutting boneless meat, cured meats, ham, bacon, lard, fish, and vegetables and fruits – fresh and chilled products at a temperature of +4°C – 0°C Application in small meat processing plants, supermarkets, catering companies and food service businesses General characteristics: Mechanical performance: 1900 kg/h Compact design Made of high-quality steel Gjdpfxoz I Eqrj Ag Seuh The device meets the highest hygiene standards Easy and quick to disassemble components Net price Video showing how it works:

Year of construction: 1989, condition: excellent (used), functionality: fully functional, LEUSHUIS STORAGE TANKS | Stainless steel storage/process tank, 10,000 liters Manufacturer: Leushuis Gusdpsz Ir R Esfx Ag Ssh Model/Type: LAGER TANKS Serial number: 4367 Year of manufacture: 1989 Capacity: 10,000 l Maximum working pressure: 0.9 bar Maximum design temperature: 50°C Weight: 1150 kg Material: Acid-resistant stainless steel (AISI 304 / 1.4301) Professional, large-capacity storage and process tank from the renowned Dutch manufacturer Leushuis, with a capacity of 10,000 liters. The tank is made of stainless steel grade 1.4301 (AISI 304), which guarantees the highest resistance to corrosion, mechanical damage, and the action of cleaning chemicals used in CIP processes. This tank is ideal for use in food processing plants, meat processing facilities, breweries, fat processing plants (production of sauces, mayonnaise), as well as in the chemical or cosmetics industry. The unit is designed for operation at a working pressure of up to 0.9 bar and at a temperature of up to 50°C, which enables stable operation of storage, maturation, or pre-processing of fluids.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Gujdpfxsz I Tguo Ag Seh Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: hydraulic, stroke rate (max.): 8 1/min, throat depth: 355 mm, punching force: 92 t, punching diameter: 30 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 500 mm, table width: 500 mm, overall weight: 2,200 kg, total length: 1,860 mm, total width: 790 mm, total height: 1,900 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, documentation/manual, electrical contact length stop, emergency stop, foot remote control, notching unit, Metal Technics Polska MTP IW90 hydraulic ironworker – NEW – versatile steel processing in one machine A practical solution for metal fabrication workshops, steel construction and maintenance departments. The MTP IW90 combines punching, flat-bar and plate shearing, section cutting and notching in one hydraulic machine. The supplied bending attachment also enables short plate bending below 500 mm width. Several operations can be carried out at the same workstation, reducing handling between separate machines. TECHNICAL DATA Gujdpfx Agjz Hy I Ne Ssh • Year of manufacture: 2026 • Punching force: 900 kN • Punching capacity: Ø30 mm hole in 20 mm steel • Maximum cutting thickness: 20 mm • Maximum cutting length: 480 mm • Material tensile strength: up to 450 N/mm² • Shearing angle: 8° • Ram stroke: 80 mm • Nominal stroke rate: 8 strokes/min • Throat depth: 355 mm • Main motor: 5.5 kW • Supply: 400 V, 50 Hz, three-phase • Machine dimensions (L × W × H): 1860 × 790 × 1900 mm • Brochure gross weight: 2200 kg Maximum cutting thickness and maximum cutting length are separate limits; the permissible combination depends on the material and operation. STANDARD EQUIPMENT • Punch and die tooling • 500 × 500 mm work table with chamfering provision • 1000 mm electric back gauge / contact length stop • Foot pedal controls with stop buttons • Schneider electrical components • Hydraulic system with HUADE valves and a Japanese-brand oil pump • Bending / press attachment and reducing sleeve PRICE AND DELIVERY €10,970 net, excluding VAT, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Delivery to any destination in Europe – shipping cost calculated upon request (not included in the machine price). The model-specific inspection report records a successful factory inspection on 20 August 2026. Photos show the supplied model and its equipment. Technical capacities are based on the supplied documentation; tooling and the material being processed determine the applicable operating limits.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Pitney Bowes Relay 7000” enveloping machine Guedpfxez Iwyre Ag Ssh Item for sale: 1 x Pitney Bowes Relay 7000 Meter readings: Total: approx. 151,436 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Gedpfx Agez Ixzqo Ssuh Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 2600-12/1.85 IRC M2004 robot, complete Controller: IRC5 M2004 Number of axes: 6 Max. payload: 12 kg Max. working range: 1850 mm Year of manufacture: 12/2013 Scope of delivery: Robot, controller, cables, teach panel, circuit diagrams Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two weeks start-up guarantee. No further warranty. Gjdpfx Agjz Rlg Ho Ssuh In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Price is per robot. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please provide country, city and postal code. Freight costs on request – please provide the delivery address.

Condition: used, mileage: 2,98,000 km, power: 235 kW (319.51 HP), first registration: 10/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: red, gearing type: automatic, Equipment: ABS, air conditioning, compressor, parking heater, Scania P320 EHC Horse Truck, 6 Horses Capacity for 6-7 horses, side and rear ramp, basement under living area, storage compartments around the truck, fresh water tank, wastewater tank, sleeping berths, living room, video and temperature monitoring for the horse compartment, LG stationary air conditioning, stationary heater, TV/satellite, high-quality wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator, external saddle compartment, cruise control, alloy wheels, air suspension, trailer hitch, and more. ///Vehicle shows signs of wear/// Errors/input errors and prior sale are subject to change. * NET PRICE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse trucks and trailers. Gjdjz Rr Tyopfx Ag Seuh Please schedule an appointment in advance. Contact: Richard Theurer, Andreas Theurer

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, DIESEL COMPRESSOR DIESEL DOOSAN 7/20, recently serviced!!! Compressor with documentation for registration in Poland. Technical specifications: capacity: 2.00 m3/min; working pressure: 7 Bar; engine: KUBOTA operating hours: 295h!!! year: 2023 Compressor is in perfect working order, ready for operation, with warranty. net price: 27,500 PLN gross price: 33,825 PLN Gusdpfez Rvznjx Ag Sjh Below is a link to a video showing the machine in operation.

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage needs. The modular high racking is ideal for logistics operations, industrial applications, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet rack system offers an efficient storage solution for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 690 cm - Depth: approx. 110 cm - Length: approx. 3080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam color: yellow powder-coated - Uprights: approx. 690 x 110 cm, pre-assembled - Upright color: blue powder-coated - Levels: floor + 3 - Pallet spaces: 132 including ground level - Version: Used STOW SCOPE OF DELIVERY: - 012 x upright frames (approx. 690 x 110 cm), pre-assembled - 066 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 132 x safety pins Price: €3,552.00 net €4,226.88 gross You will receive an invoice showing VAT separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery in Germany via our partner shipping company – freight costs depend on postal code - Professional assembly and dismantling by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer – tailored to your specific requirements. Whether new installation, modification, or extension, we offer expert advice on your racking configuration. SHOWROOM: Visit our showroom! On-site, you can get a comprehensive overview of our pallet racking, shelving systems, and further storage solutions. Many systems are assembled and can be experienced directly. Our expert advisors are available for your questions and tailored consultation – we look forward to your visit! Haven’t found the right solution? Visit our website to get a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Gusdpfx Agoz Rv Afj Sjh Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, ABB Robotics IRB 140 S4C+M2000 Robot Controller: S4C+ M2000 Number of axes: 6 Max. payload: 6 kg Max. working range: 810 mm Year of manufacture: 2006 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Gsdpjz Rk Snofx Ag Sjuh Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are continuously available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please provide the country, city, and postal code. Freight costs upon request – please provide the delivery address.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, ABB Robotics IRB 6600 175/2.8 S4C+M2000 Robot Controller: S4C+M2000 Number of axes: 6 Gjdpsz Rk T Sjfx Ag Ssuh Max. payload: 175 kg Max. working range: 2800 mm Year of manufacture: 2004 Scope of delivery: Robot, controller, cables, teach panel, circuit diagrams Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ABB Robotics IRB 1400 S4C + M2000 robot with rotating table and Fronius TPS 3200 welding machine, as well as Fronius torch cleaner. Number of axes: 6 Max. payload: 5 kg Max. working range: 1450 mm Year of manufacture: 2003 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams, floppy disk drive for data backup, Fronius TPS 3200 pulse welding machine, rotating table, Fronius robot hose package. Used – shows normal signs of wear, but is fully functional. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Gsdpfxjz Rk Uio Ag Ssuh Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, KUKA KR240 R2700 prime KRC4 robot – only mechanics Year of manufacture: 10/2012 Max. payload: 240 kg Max. working range: approx. 2700 mm Scope of delivery: Robot mechanics without accessories Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The selling price is per robot mechanics. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight and desired delivery conditions. Guodpjz Rmgbefx Ag Ssh Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, ABB Robotics IRB 7600 robot – mechanical components only (various models and versions – see below) 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, No. 76-63643 – mechanical components only (EAN 4262549323934) • Maximum robot payload: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-500/2.55 M2004 robot, No. 76-63756 – mechanical components only (EAN 4262549323941) • Maximum robot payload: 500 kg • Number of axes: 6 • Maximum reach: 2550 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, No. 76-63695 (20960 operating hours) – mechanical components only (EAN 4262549323958) • Maximum robot payload: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, No. 76-63839 (16184 operating hours) – mechanical components only IRB 7600 (EAN 4262549323965) • Maximum robot payload: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The stated amount is net and applies per item. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Pick-up at our location in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Gjdpfx Asz Rnd Ujg Souh Shipping costs to foreign countries upon request – please specify the country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, Year of construction: 2018, Max. printing capacity: 3600pcs/h, print format: 220mm/170mm, product diameter: 15mm-75mm, max. product height: 200mm, printing colors: 1, UV lamp power: 2.4kW. The image does not show the actual machine. Documentation available. Inspection possible by appointment. Gjdpfxoz R Uw No Ag Souh