Used Shrink Film for sale (1,672)

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Klodpfx Adeq Htfnowsl Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, BELCA shrink wrapping line with two L-shaped shrink wrappers and oven. The first shrink wrapper consists of a preparation table, the BELCA Model L 120 G shrink wrapper with 3 kW power, and BELCA Model L 293K oven inlet rollers. Ksdpfx Adsxvya Tjwoll The second shrink wrapping machine consists of a preparation table for smaller pieces, the BELCA Model L 183G shrink wrapping machine with 0.18 kW power. The oven is a BELCA Model L 293 K oven with 21 kW power, and at the oven outlet there are several idle roller transfers for evacuating the piece.

Condition: good (used), CRYOVAC ST 02 ID.NO. 2892 Klodpov Aby Esfx Adwol Cryovac ST 02 shrink bath with water. Max dimensions product 59 x 37 cm. Dimensions machine 70 x 60 H 110 cm.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Kjdpfx Adowg Sd Uswjll Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History Klsdjwnm Ukspfx Adwsl This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, Year of construction: 2016, functionality: fully functional, Pratika 56-T that has been standing still for the last 5 years. Kjdpfoxpq Hksx Adwoll

Condition: used, Year of construction: 2005, Shrink-tunnel Additional title: with 2 parallel belts (incl. sleeve fit control) Air volume: 700 m³/h Engine speed: 900 rpm Power: 0,25 kW Length: 3 m Width: 1,25 m Height: 2,1 m Kledevcq E Depfx Adwjl Weight: 500 kg Operation / Control: with control panel for each conveyor Features: Two parallel conveyors going through the unit coming from 2 sleevers, optical sleeve fit control with conveyor stop

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7560, nominal power: 51 kW (69.34 HP), working width: 1,200 mm, Shrink tunnel system, packaging line Manufacturer: Kuper Kljdpfx Ajxru Nnedwsl Machine type: ST/I-1200 Machine number: 7560 Year of manufacture: 1991 Connected load: approx. 51 kW Working width: 1200 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. Kjdpfx Adowh R D Aswjll The press is fully functional and in constant use. The press is fully functional, in constant use.

Condition: used, machine/vehicle number: 16011, automatische Folieneinschlagmaschine - Wrapping & Shrinking Machines CMC FA-600 BT Online-Video-Inspection by Skype-Video Kledpoh Axp Nefx Adwjl We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-foldYear 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kljdpjh Axgnjfx Adwsl

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band Klsdpfeh Ax Hfjx Adwol GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1995, machine/vehicle number: 4501, Filmentwicklungsmaschine / Film develope machine AGFA RapiFlex 51     Baujahr / Year 1995 - Serial-No. 4501DD382942 Arbeitsbreite / Size max. width 510mm Online-Video-Inspection by Skype-Video Kodjupy S Aepfx Adwsll We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1997, machine/vehicle number: 4943, Filmbelichter / Film Processor ECRM 360 Laser Red Serial-No. 4943 Klsdpfx Adjtzc Nbewol Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system Kledpfopah U Tox Adwsl INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: reconditioned (used), Year of construction: 1996, Completely reconditioned BVM shrink tunnel. Ksdpfx Aeuihczsdwsll

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Kedpfxoxn Aamj Adwjll

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Ksdpfsw E Igvsx Adwjll Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Kjdpfx Adjw Ddb Tswoll Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Shrink Tunnel Compact 650 D Year of construction: 2008 Dimensions: approx. 2600 x 1500 x 1400 mm (LxWxH) Weight: approx. 750 kg net / 830 kg gross Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 200 mm Kledpfswmcuwox Adwel Length of heated tunnel hood: 1800 mm Working height: 800 - 900 mm Power supply: 400 V three-phase current Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in single-unit operation Compact and economical shrink tunnel with the patented ring nozzle heating system and particularly effective air flow regulation. Equipped with a continuously adjustable plastic link belt. This tunnel is particularly suitable for shrinking small to medium-sized products. Viewings and demonstrations are available at our premises by appointment. Functional guarantee, no warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: C2401317M, warranty duration: 12 months, For sale: automatic industrial pallet stretch wrapper. The machine is brand new, unused, and has never been unpacked from its original packaging. Available immediately, as it comes from a cancelled project. This is an excellent opportunity for companies looking for an efficient and reliable automation solution. Technical specifications of the wrapper are provided in the attached PDF. Main images are for reference only. The unit is sold packaged on the manufacturer’s pallet. Installation support can be offered. Klodsw Nn Tcspfx Adwjl

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW Kodpfjwgyx Tex Adwoll

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Klodpfx Asw En Uaedwel

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts Kledpfx Aew En Ugsdwol

Condition: used, Year of construction: 2019, Overview   The fully automatic shrink hood applicator MSK381 was manufactured by the German OEM in 2019. It was used in a German mineral water company for the packaging of PET bottles in shrink trays on euro pallet and dd/half pallet. The machine is still in production and can be visited in operation.  Technical Details   Capacity  60 pallets / h (Euro)  92 pallets / h (DD)  Formats  Euro Pallet  DD Pallet  Scope of delivery  Control panel – HMI  Conveyors according to layout  Hood station   Shrinking frame with gas burners  Kedper R Rd Isfx Adwsll