Used Si 550 for sale (8,439)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Rjdpfxek Abcgo Aazon Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Redpfemqty Rsx Aazjn Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 180°-750-550 IR1000 left RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Redpfsk Abcrsx Aazon Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 4820 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece Redpfx Ajk Aa Ryoazsn RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Rjdpfxek Ablps Aazjn Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Rjdpfx Aok Aa T Rsazsn Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Rsdpfx Aek Aba Teazjn Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 Rjdpfx Aaek Aa Ebezjn RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m Rodpfxsk Aa Eio Aazon dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Rjdpsk Aa T Hsfx Aazon For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Rsdjk Aa Nbjpfx Aazjn Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, functionality: fully functional, empty load weight: 130 kg, lifting power: 1,000 kg/m, Year of construction: 2026, machine/vehicle number: 550, Vacuum Lifter Panel System DS 550 MAX - Radio Remote Control Configuration can be customized to individual requirements SPECIFICATION: • 6 arms, each 1 m long • 6 cross arms with adjustable suction cup mounting • 12 side suction cups • Wall adapter • Control unit with charging function • Control unit with radio remote control • Radio remote control handset • 2 safety belts • Maximum lifting capacity: 1000 kg FEATURES: • Compatible with all cranes and HDS systems • Suitable for various working conditions • Suction cups can be configured independently without tools Rodpsxnanzsfx Aazen • Power supply: 12V battery (up to 12 h of operation) • Battery charge indicator • Vacuum gauge • Vacuum reservoir • Max lifting capacity 1000 kg • Device weight approx. 130 kg • Suction cups 500mm x 100mm with REPLACEABLE SEAL

Year of construction: 2017, condition: like new (used), functionality: fully functional, HBC-550 Industrial type cryogenic pulverizer machine was in limited use but never in a full-scale polymer production, good condition. Redpfx Aswuci Reazjn Application: The low temperature grinding machine system used for various materials which can't be shattered in room temperature, and is widely used in all kinds of chemical, petrochemical, machinery, ship, automobile industry, electronic industry, clothing, coatings, printing, engineering plastic, rubber, shoes, thermoplastic materials, hot melt adhesive, nylon, polyester, polypropylene and polyethylene, thermoplastic elastomer TPU, TPEE, nylon PA11, of PA1010, PA12, PA6, PA66, PA610 copolymerization of nylon, polyester, Polyethylene, EVA, food industry as well as medicine.

Condition: used, Year of construction: 1981, machine/vehicle number: 104680, Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Rjdpfxjuqcwde Aazsn Weight of machine approx.: 6,2 ton

Condition: new, Year of construction: 2025, functionality: fully functional, Conical rotary sieve for filtering juices, mounted on a stainless steel frame; Rodpfx Ajq H Axxjazjn integrated juice collection tank 150 l, equipped with a filling level sensor for automatic switching of the subsequent juice pump depending on the filling level. Diameter: 550 mm Screen perforation: 0.3 mm Power supply: 3x400V, 50 hz, 0.5kW/16A

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, Control Unit Brand HAAS Model n/a General Data Measurements width 2718 mm Measurements height 1473 mm Measurements depth 2357 mm Main Drive Number of axis 3 Table Number of tslots 3 Table load 1350 kg Tools Type of tool holder ISO 40 Additional Equipment Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Rodpex D Eg Uofx Aazjn Media Internal cooling yes This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Code: 0401 Brand: PERFECTA Model: 550/S Sharpening machine for saw bands Technical data: With base Grinding wheel diameter mm 140 Motor Hp 0,5 three-phase Setting unit Overall dimensions mm 600 x 550 x 1400 h Redpfx Aouq Hhteazon Weight kg 120

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Redpfx Ajxqc S Isazjn Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 550 l, GENERAL Design: upright Inner diameter: 820 mm Overall height: 1,310 mm Top: open Base type: PE pedestal Location: Bremen Technical documentation: drawing Volume: 550 litres Product-contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,034 mm VESSEL Max. permissible operating temperature: 80 °C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Exterior surface: marbled Interior surface: high-gloss Rsdpfx Aexqcgrjazen Foot material: plastic

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: upright Outer diameter: 890 mm Inner diameter: 650 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top head: removable / hinged top cover Agitator: beam agitator Support type: feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Capacity: 550 litres Double jacket capacity: 67.0 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended use: pharmaceuticals TANK Max. permissible operating temperature: 135 °C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Rjdpfsxqaqnjx Aazsn Baffle: Agitator positioning: centrally mounted in the top cover Agitator details: agitator data not readable

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg Rodpfxsxtfv Ij Aazen - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AB/203002, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 Rodox Runqjpfx Aazen - Motor Hp 10 - Inverter for speeds change - Motirzed scoring unit adjustement - Serial number AB/203002 - Year 2010 (CE)

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Rjdev Nhg Sopfx Aazjn Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -

Condition: good (used), Waters Type: Synapt G2-Si SYNAPT G2-Si mass spectrometry (TOF with ion mobility) New discovery opportunities for your lab Data, data processing. Powerful. SYNAPT enables the detailed characterization of complex mixtures and molecules with uncompromising qualitative and qualitative performance, optimized workflows and a platform of unparalleled versatility. Ultimate UPLC/MS/MS performance Rsdpsvitlmjfx Aazon Powerful data-independent and data-dependent solutions CID and ETD fragmentation Wide range of experimental options Upgrade to three separation dimensions! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer an industrial robot. Rsdpfxsfcwvuo Aazen Type: 550 Table-Top SCARA Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone. Written order possible by email or fax