Used Sinter for sale (104)

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 26, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-26 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-26 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -26 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 384 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 22 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 23 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 8 hours The number of people required for assembly – 2 people Ijdpfx Aof S Hh Tebceap DOCUMENTS ATTACHED TO M80-26 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Ieded Tamlspfx Abceap The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Glass racking system 10 drawers for 160 cm x 250 cm glass. Load capacity per drawer is 800 kg.

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Iaedpfx Ajwxwa Esbcjp Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Condition: - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. Ijdpfx Aeytlb Sobcsap - EXW from Auckland, New Zealand. This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.

Condition: new, functionality: fully functional, New ZF (EK, EKR, EB-ER, EK-ER), Stromag (EKE, EDE, EKN, EFL, EMD, ELN), Heid (FOV, FZV, FMV, MMZ, FMOB) and other clutches available from the biggest European stock. Iaodpfxovq Nllj Abcsp The most popular brands which we have in continuous sale, are: ZF, Heid, Stromag, Ortlinghaus, Binder Magnete, Ema Dessau, Fumo, PSP Pohony, Telcomec, Warner, Monninghoff, Shinko, but also many other unique positions. We offer: clutches and brakes: electromagnetic multidiscs, toothed, mechanical and hydraulic; accessories: driver cups, plates (steel, sintered steel), levers, brush-holders, assembly sets, brushes. We operate efficiently because we know that in a crisis situation, the quick response is the most important thing. Are you looking for an electromagnetic clutch or brake? Our staff will help you to find it, and in case of items which are not longer in production, they will find a best replacement for you, or will offer a regeneration.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained Iodpfx Abeyc Ub Tscjap - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Iaedpfx Aocnxrcobcop Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: new, Year of construction: 2026, Machine for processing sinks made of materials such as sintered quartz, granite, granite composites and ceramic models, etc. Technical data: Isdpfx Aboualqqeceap MILLING PLOTTER 1325 PRO+ WORKING AREA 1300X2500MM Z AXIS RANGE 700MM - PRO OMRON SERVO AC HIGH SPEED DRIVES (SET WITH PLANETARY GEARS) 1.5KW ETHERCAT INTELLIGENT ENERGY RECOVERY OSAI OPENSMART REAL-TIME INDUSTRIAL CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT UP TO 16 AXES, ETHERCAT COMMUNICATION WITH THE CONTROL CABINET AUTO CALIBRATION OF THE GATE ANGLE EUCHNER HBA-103037 HAND MANIPULATOR CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRAL LUBRICATION WITH SKF SOLID GREASE BEAM SYSTEM PNEUMATIC CLAMPS SINK FIXING SYSTEM DUST REMOVAL CHANNELS BALL SCREW COVER ON THE Z AXIS BLOWING SYSTEM FOR RIDING ELEMENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Iaodpfek Hz Nqex Abcjp Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Firing chamber (useable space): Diameter: 84 mm Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Iodpsxgb Nqefx Abcsap Good working condition. Please chech out out other listings as well.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Iajdpfxex Tdyze Abcep Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc. Iasdpfxjtp S E Ee Abcop

Year of construction: 1995, condition: used, Dust extractor,welding fume extractor by Herding. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1680 m3/h Iaodpfx Aspwhl Ujbcep

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Iedpfxjha E S Te Abcjap Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 20, warranty duration: 12 months, total height: 2,180 mm, total width: 3,060 mm, total length: 3,170 mm, SLIDING RACK FOR GLASS M80-20 MANUFACTURED IN 2025/ BRAND NEW Iodsf S Hhaspfx Abcsap We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-10 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -20 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 306 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 18 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 18000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-20 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Iedpfxox I Rfgs Abcjap Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on Iaedpfsx I Rfasx Abcop EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Iasdpfx Aboxu Ewzjcep Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: good (used), functionality: fully functional, Technology: Selective Laser Sintering Build Volume: 230 x 230 x 250 mm (9.0 x 9.0 x 9.8 inch) Laser Performance: 60W Fiberlaser (CO2) Layer Thickness: 0.06 / 0.08 / 0.1 / 0.15 / 0.2 / 0.3 mm Max. Build Speed: Up to 22 mm / hour (Geometry dependent) Accuracy: 0.2mm Full Parameter Access: Yes Iasdjwcyzajpfx Abcep Printer Dimensions: 148 x 85 x 204 cm (58.3 x 33.5 x 80.3 in)

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 0963, Oven used for sinter paste drying and subsequent cooling of printed half-bridges Iodpfoxm Ri Hsx Abcjap

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,200 h, High-end 3D printer for processing precious metals! TECHNICAL DETAILS Technology: DMLS (Direct Metal Laser Sintering) Build Volume Diameter: 80 mm Build Volume Height: 95 mm Layer Thickness: 20 µm Laser Type: Yb fiber laser 100 W Scanner: High-speed scanner, F-Theta lens Scan Speed: up to 7 m/s Beam Diameter: Laser focus >30 µm MACHINE DETAILS Dimensions & Weight Dimensions: 800 x 950 x 2,250 mm Weight: 580 kg Power Supply: 200-240 V Network Connection: Ethernet Machine operating hours: approx. 1,200 EQUIPMENT Software: EOS RP Tools, EOSPRINT Software license for silver powder Micrometer for height measurement Iajdpfx Aboxfz Hgscop 3 new steel build plates At least 4 used steel build plates, still usable USB key for software programs Note: It is recommended to have the machine serviced before commissioning. The manufacturer offers this service for approx. €5,000 including possible spare parts.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 250 h, Since 2021 for customer prints, product demonstrations and trade fair appearances in our possession. Completely ready for use and prepared by manufacturer-certified personnel from IGO3D, Desktop Metal Partner. Can be demonstrated in Hanover, Germany (also remotely via video call). Easy-to-use Additive Manufacturing 2.0 solutions for industrial production — delivering transformative value. Office-friendly metal 3D printing with two steps (Print > Sinter) and eight materials. Key benefits: „ Easy, two-step processing „ User-friendly software-controlled workflow „ Patented smart Separable SupportsTM technology for quick post-processing „ Qualified for eight materials „ Designed for office-friendly printing „ A trusted system used worldwide with success The easy-to-use Studio System leverages proprietary Bound Metal Deposition™ (BMD), an extrusion-based metal additive manufacturing process where metal rods — metal powder held together by wax and polymer binder — are heated and extruded onto the build plate, shaping a part layer by layer. Once printed, the binder is removed via the debind process, and then sintered, causing the metal particles to densify. The Studio System 2 is even easier to use than ever before with new material formulations allowing printed parts to be placed directly into the furnace without the need for a solvent debind. The result is a streamlined two-step process with a nearly hands-free experience. Eight materials are available, including a range of steels, copper, and nickel and titanium alloys. Simplified metal part production using safe-to-handle bound metal rods The Desktop Metal Studio system creates metal parts for functional prototypes, tooling, jigs and fixtures, and low-volume production applications with expert metallurgy built-in. Isdpjm Rgzaofx Abcoap Easily produce difficult-to-machine parts featuring complex geometries like undercuts and internal channels to optimize metal components in an office setting.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Iedpfx Aerq Hmzjbcsap Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Isdpjq I Sgyjfx Abcoap

Condition: used, TECHNICAL DETAILS Mobile extractor for dusts, smokes, and gas produced by laser applications. Concerns the sectors of engraving, welding and sintering. Iasdpfsuhb Eaex Abcsp - Power : 230 [V]