Used Sintering Furnace for sale (816)

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands Molding line HWS, type SFM2 30 molds/hour, funnel milling machine Control system S7 Including sand preparation with Webac 66B, water dosing unit Datec Core shooter Röper H6.5 - H16, hydraulic, S7 control system Core sand mixer by Klein: cold-box mixer on rails for up to 4 machines YXLON X-ray machine Spectrometer Spectro Ideco analysis device Belt grinder Hazardous material container Drying oven Bandsaw Molding machines + Near Braunschweig: Sand casting foundry Bsdpfx Aevz Aprjbtsdg HWS - HSP-2D, flask size: 840 x 650 x 250/250 mm Year of manufacture: 2000 + 2004 Sand preparation with Webac mixer 88B, batch size 1800kg Core shooter 10-20 ltr., year 1999, cold-box system with ball mixer mounted on machine Melting furnaces Belt grinder You are cordially invited to inspect the foundry. All equipment and items are sold in used condition. The seller excludes any warranties.

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. Bdsdpfx Asy Nkqxebtjg If you are interested or need more details, please send me a message.

Condition: used, Professional bakery oven Miwe with fermentation chamber is an ideal solution for simultaneous baking and dough proofing under controlled conditions. This unit ensures optimal baking results thanks to even heat distribution and precise process control. The fermentation chamber provides ideal conditions for dough rising, resulting in improved product quality, texture and volume. The oven is suitable for preparing various bakery products such as bread, pastries and other dough-based items. Robust construction and professional build guarantee reliable operation, long service life and easy maintenance, making this oven an excellent choice for daily use. Technical specifications: Manufacturer: Miwe Machine type: Bakery oven with fermentation chamber External dimensions: 90 x 83 x 210 cm Internal dimensions: 60 x 40 cm Capacity: 8 trays (60 x 40 cm) Power: 14 kW Voltage: 400 V / 50 Hz / 3 N PE Bsdpsy Nap Defx Abtodg

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Bodpfx Aoy H Akrebtedg Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), fuel type: electric, Equipment: CE marking, documentation/manual, Industrial Heat Treatment Furnace – 17 m³ | 400°C | Siemens PLC | Like New Price: €104,100 (approx. 38M HUF) Location: Hungary High-performance industrial heat treatment furnace in excellent condition, designed for precise and reliable thermal processing across multiple industries. Commissioned in April 2024 – only 150 operating hours. Key Specifications • Chamber volume: 17 m³ • Max temperature: 400°C • Temperature uniformity: ±5°C • Heating power: 90 kW (electric) • Control: Siemens PLC with touchscreen • PID temperature control • Recipe storage & data logging • 8 temperature sensors • Fresh air & exhaust system • Frequency-controlled fans • CO₂ fire suppression system • Dual-side door access Applications • Wood heat treatment (thermowood) • Furniture and parquet production Bodpfjy Izkmsx Abtsdg • Composite curing • Coating / paint baking • R&D applications Advantages • Industrial-grade performance • Excellent temperature precision • Energy-efficient insulation • Fully automated operation • High safety standards ✔ Available immediately ✔ Inspection under power possible ✔ Dismantling and loading support available

Condition: excellent (used), Leybold Oerlikon Type: RUVAC WSU 501 Leybold Oerlikon RUVAC WSU 501 Roots Vacuum Pump Booster 505 m³/h 2.2kW DN100 For sale is a high-performance industrial roots vacuum pump manufactured by Oerlikon Leybold Vacuum. This roots pump serves as a booster pump to increase pumping speed in vacuum systems and is typically operated together with a backing pump. It is ideally suited for industrial applications such as coating systems, vacuum furnaces, laboratory equipment, or general vacuum technology. The pump impresses with its robust construction and high pumping capacity. Technical Data: Manufacturer: Oerlikon Leybold Vacuum Model: RUVAC WSU 501 Bdedpjytfzrsfx Abtsg Year of manufacture: 12/2010 Pumping speed: 505 m³/h (50 Hz) / 606 m³/h (60 Hz) Max. pressure difference: 80 mbar Motor power: 2.2 kW Rotational speed: 2,900 rpm Voltage: 230 / 400 V three-phase Current draw: approx. 9.0 / 5.2 A Duty type: S1 continuous operation Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and error!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Bdjdpfxoykyqio Abtjg

Condition: excellent (used), functionality: fully functional, used deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 decks, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood deck ovens Crosta 3.18.20, each 3 decks (with pellets), with 1 loading and unloading system Wachtel Comfort Lader (with Wachtel WinServer), year of manufacture 2016, in bakery condition, for self-dismantling, worked flawlessly until the closure of the bakery Bdedpfxsx E Df Io Abtsg

Year of construction: 1999, condition: used, machine/vehicle number: 99116961, Technical specifications: - Rated / continuous temperature up to 1150 °C - Infinitely variable temperature control - Temperature display - Drive: 400 V / 5 kW - Internal dimensions approx.: W 160 x H 160 x D 360 mm - Required space approx.: W 850 x H 700 x D 600 mm Bedpfx Abjx E Ubgjtodg - Weight approx.: 140 kg

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Bdjdpfjxy Ikbsx Abteg

Condition: good (used), 177 USED Winkler Columbus Batch Oven. TECHNICAL DATA: Bdsdpoxp Daksfx Abtog - Number of shelves: 5 - Baking area: 10 m² - Gas burner EXTERNAL DIMENSIONS (in cm): - Width: 152 cm, - Length: 281 cm, - Height: 236 cm. CHAMBER DIMENSIONS (in cm): - Width: 120 cm, - Depth: 160 cm. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Wiesheu convection ovens models B4-E2 and B8-E2 are designed for professional use in bakeries and food service environments. The units are used but fully functional and ready for operation. These models offer capacity for 5 and 10 trays, making them suitable for different production needs. Sold only as a complete set, they provide a practical solution for equipping or expanding bakery operations. Machine type : Convection oven Wiesheu B4-E2 & B8-E2 Wiesheu , type B4-E2 & B8-E2 ( ovens for 5 and 10 tray ). Sold only in complete set ! Technical data : B4-E2 : Electric power : 9.2kw Watter pressure : 150-250kPa Voltage : 400V Frequency : 50Hz B8-E2 : Electric power : 18.4kw Bjdpfxsy Avkde Abtedg Watter pressure : 150-250kPa Voltage : 400V Frequency : 50Hz

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U Bdsdpfoyxcqvjx Abtjg - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Rack oven for 400 x 800 mm tray size, 15 levels, with 3 carts Bedjy Dfmkopfx Abtsdg

Year of construction: 2003, condition: good (used), 297 USED MIWE BACKCOMBI Oven. The oven consists of: - AERO convection oven (with fan) for 4 baking trays: 60x40 cm, - CONDO deck oven with chamber dimensions: 60x40 cm (2-chamber), - Proofer for 8 baking trays: 60x40 cm. EXTERNAL DIMENSIONS (in cm): - Width: 90, - Height: 222, - Length: 104. TECHNICAL DATA: - Year of manufacture: 2003. Paid options available: renovation / transport of the device. The price is a net price. Bdedpfx Ajyg H A Djbtsg Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C Bdedpfx Abeyg I Egetog • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: excellent (used), 302 USED WP Rototherm 1020 rotary cart oven. EXTERNAL DIMENSIONS (in cm): -W: 155, Bsdpfx Abjyhchretodg -D: 160, -H: 239. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), Eloma Backermaster EB 30 XL T convection oven. 5 piece Eloma ovens for sale. The price is for one piece. Ready to use. Located Locally in Hungary (EU), Vácegres. Bjdpfx Aeyldakobtodg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel Bdodpeygkuwefx Abtog S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), 304 USED Shop oven for 3 60x40 trays. TECHNICAL DATA: - 3 trays of 60x40. EXTERNAL DIMENSIONS (in cm): - height 46, Bdodpfx Aboyi Enqetog - width 84, - length 75. Paid options available: transport of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 2013, Hein Luxrotor rotary furnace - used - year of manufacture 2013 - for sheet metal 58 x 98 Bsdpfjzly Ezox Abtodg - electric - total power approx. 70 kW - computer control with touchscreen - fume hood with fan - ceramic wall - 1 trolley - trolley top locking system - technical condition good / device inspected and cleaned - collection from warehouse - price on request

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Bedpfozhlr Eox Abtsdg Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. Bedpfxezhvage Abtjdg If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, input voltage: 400 V, overall weight: 2,500 kg, Equipment: CE marking, Zuchelli gas-fired rotary oven for bakeries Bsdpezpfhvsfx Abtodg Double trolley, 60x80 or a single trolley, 80x120 4 ovens available, with 20 trolleys, 80x120

Condition: refurbished (used), Daub bakery oven, 22 m² - oven after general overhaul - includes heating boiler - control system with 2 secondary circuits - new magnetic pumps Option to build a new oven. Upon agreement, we provide transport, installation, and warranty. Bsdpezt Dbiefx Abtodg Please contact us regarding availability.