Used Slatted Frame for sale (8,220)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system Lhsdpfsdzqmzex Abcod - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar Lhodpfx Ajh U Dtuobcjd 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg Ledpfx Aboh Uhqyscjhd very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine Lodpjhrakvjfx Abcshd - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ledpfx Asv Uraasbcjhd Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Lhsdpfx Abefgpfpjcod Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition Lhsdpfjgbpuhox Abcjd

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Lhjdpfx Abov H E Alecjd

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Lhjdev Am Ibopfx Abcsd Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1363, Vollmer gang saw sharpening machine Type Cana/HG No. 1363 Lodpfx Aboyrtttocshd

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre Lhodolqxg Hopfx Abced

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Lhedpshcfzkofx Abced Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Lsdpfxsig Hzke Abcjhd The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Lsdpfxsg S Uc Ds Abcohd Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Lhedsf A R Uhjpfx Abcjd Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Condition: excellent (used), Moulding frames, moulding boxes approx. 270 pieces very good, immediately ready for use condition lashing on pallets ready for transport Ljdpfjd Txz Sjx Abcjhd

Condition: new, Year of construction: 2024, total height: 2,100 mm, lifting height: 2,200 mm, empty load weight: 3,000 kg, load capacity: 4,500 kg, Lifting frame for timber packages 1200 x 1200 3000 - 6000 mm 5 lifting arms Max. load 4 to Dimensions width: 2500 mm length: 5000 mm height 2100 mm Stroke: from 550 - 2200 mm Lhjdpor Ddbgofx Abcod Gear motor 400 V 3 KW

Condition: like new (used), Year of construction: 1991, functionality: fully functional, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Lhodju Dxb Topfx Abced Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Lhjdpfx Aohzgtusbcod Width: 1000mm Height: 1900mm Weight: about 100kg

Condition: new, Shelving frame column cover. The Mega-M storage rack leg bumper is made of yellow lacquered steel. It has 4 holes for permanent installation in the floor and lateral holes for attaching e.g. a horizontal beam. The buffer provides greater safety for forklifts to move around the warehouse, reducing the risk of serious racking repairs. Lsdpfxem Sg Dhj Abcshd -Made of yellow lacquered steel. -Universal and easy to install. -Mounted on the front side of the racking. -Makes it possible to attach horizontal beams. -Used in industry to protect shelves from mechanical damage. -Increases safety, reducing warehouse maintenance costs. The offer concerns the leg bumper: Product code: MTP001334 - Height: 400 mm - Width: 170 mm - Length: 300 mm - Metal thickness: 4 mm - Mounting hole diameter: 15 mm - Colour: RAL1023 yellow - Pallet quantity : 108 pieces Net price : 11 euro each. We have a wide range of shelving components, both new and used: frames, crossbars/beams and shelving fillings: crossbeams, WEMA gratings, mesh shelves or chipboards. Prices quoted are for the sale of wholesale quantities for export outside Poland, please contact us for details. Would you like to check wholesale and retail prices within Poland please contact us. * The above price is valid for a minimum purchase of one pallet. * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Lhodpfx Absv Iv Sgecjd Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Features: Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.

Condition: excellent (used), functionality: fully functional, Working width: 3000 mm Working height: 2500 mm Year of manufacture: 1997 Motor power: 7.5 kW Weight: 2500 kg Power supply: 400 V Clamping beam: from the top Side cylinders and gear units: adjustable from control panel Time settings: for closing individual sections Emergency stop: pull cord switch Lodpfeyk Snyex Abcehd CE marking: Yes

Year of construction: 1980, condition: ready for operation (used), functionality: fully functional, For sale: EWD HDN 600 Swing Frame Saw The EWD HDN 600 is a heavy-duty swing frame saw, engineered for use in medium to large-scale sawmills. It features a robust construction and state-of-the-art technology to ensure maximum efficiency and precision in timber processing. Technical specifications: • Stroke: 600 mm • Passage width: 730 mm • Passage height: 700 mm • Maximum speed: 320 rpm • Feed rate: 0–13 m/min, infinitely variable Lsdpsymgy Njfx Abcjhd • Feed drive power: 8.5 kW • Pulley diameter: 1000 mm • Maximum drive power: 160 kW • Total weight: approx. 12 t Features: • Hydraulic feed system: Infinitely variable across the full range for optimal coordination between saw speed and feed rate. • Automatic overhang adjustment: Automatically adapts to the selected feed rate to minimize upcut and ensure superior surface quality. • Cooled upper frame guides: Reduce wear and ensure smooth machine operation. • Rugged design: Durable and low-maintenance, ideal for continuous use in demanding production environments. Condition: The machine is in excellent condition, has been regularly maintained, and is ready for immediate operation. Fully hydraulic, with automatic overhang adjustment Hydraulic saw tensioner and saw blade installation Drive motor and gear assembly Electrical cabinet with controls Splitter wedge type AVER, hydraulically driven In very good condition, year of manufacture 1990, ongoing manufacturer servicing Top condition with remote-controlled carriage

Condition: used, 50 pcs. Jungheinrich MPE frames pre-assembled 600 x 100 cm, used 🧰 Product Features • Manufacturer: Jungheinrich • Finish: galvanized • Condition: used • Frame: pre-assembled 600 x 100 cm • Frame width: 10 cm • Bay load: 12,000 kg 💰 Price per frame €110 net excl. VAT. • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately Lhjdpsymlqasfx Abcjd • Inspection and collection: possible anytime by appointment Always over 5,000 linear meters of pallet racking from various manufacturers in stock (Subject to changes and errors in specifications, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex works.)

Condition: used, work piece width max. 4.250 mm Lhjdpfx Aew I Dbmjbcod workpiece height max. 2.400 mm control manuell Schafberger & Sprödhuber hydraulic frame press with manual electric adjustment.