Used Slot Boring Machine for sale (84,331)

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Available immediately. Csdpetmwnijfx Addshf

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Chodexcgtgepfx Addof Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Cedpfx Adjxpww Aodshf Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Chsdpexdnrajfx Addof Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: good (used), BOHNER & KOHLE 'BOKO F63.100' 6-AXIS UNIVERSAL VERTICAL MILLING & BORING MACHINE WITH NUTECH MACHINE SERVICES CONTROL UKUK X' Axis: Approx 2,400mm; 'Y' Axis: Approx 1,200mm; 'Z' Axis: Approx 1,300mm; 'W' Axis: Approx 300mm; 'C' Axis: Full Rotation x 'B' Axis +/- 90°; Table Dimensions Approx 1,800mm x 1,200mm; Max Table Load Approx 7,500kg; ISO 50 Taper; Spindle Head Swivel Left & Right; Spindle Speeds Approx 22-3150 RPM; Max Workpiece Height Approx 1,000mm; Rotating Work Table. Chodpoxyp Twefx Addsf

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter installation on request. Chedpfxeu Nyxwe Addef price free on truck Rotterdam.

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. Chodpfx Adeu N T Skjdef 4 Top drilling spindles 1 Grooving moulding head Very good condition. Available immediately.

Condition: used, Year of construction: 2005, devel device: Teilung 16, 22 25, 32 boring depht: 145 mm boring length: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 1500 / 3000 U/min hold down: manuell suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg Chodpfxjw Dd N Ro Addof

Year of construction: 2018, operating hours: 800 h, condition: ready for operation (used), General Data Measurements width 4715 mm Measurements depth 7750 mm Measurements height 3700 mm Machine weight 22500 kg Cjdpsxf N S Dofx Addohf Control Unit Brand FANUC Model 31iMB Main Drive Spindle speed range 35–3000 rpm Spindle motor power 15/18.5 kW Tool taper ISO 50 Wire diameter 150 mm Movement X-Axis Movement 2200 Y-Axis Movement 1600 Z-Axis Movement 1600 W-Axis Movement 550 mm B-Axis Movement 0.001° Table Outer length 1250 mm Outer width 1500 mm Table load 5000 kg Additional Equipment Tool Changer Type: Arm type / Tool Positions: 60 / Max Tool Diameter: Ø125 mm / Max Tool Length: 300 mm / Max Tool Weight: 25 kg / Tool Change Time: 9 seconds Standard Accessories: Fanuc 0i CNC control, spindle oil cooler, chip conveyor, high-pressure cooling system (30 bar), hydraulic system and central lubrication, electronic handwheel, workspace lighting, spindle vibration monitoring Optional Features: 0.001° table indexing, 3D Fanuc option for universal milling head This 5-axis MICROCUT HBM-4 boring machine was manufactured in 2018. It features a robust Meehanite cast iron structure, high spindle speeds with low vibration, and a Fanuc 31iMB control for precision. The spindle supports a 150 mm diameter and operates at speeds up to 3000 rpm. The table can handle loads up to 5000 kg, with a working area of 1250 x 1500 mm. If you are looking to get high-quality boring capabilities, consider the MICROCUT HBM-4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1994, functionality: unexamined, Pneumatic drilling stroke Pneumatic workpiece clamping 2 tables, each 500 x 280 mm Tables inclinable 2 drilling motors, each 2.2 kW Cedpjxu Eckofx Addohf 2 drilling gearboxes, each with 6 spindles Spindle distance: 25/35/40/47/52 mm Digital display for width adjustment Weight approx. 400 kg

Condition: new, functionality: fully functional, Year of construction: 2014, New and unused Chsdjw H Ad Espfx Addef Adjustable hydraulic pump Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Pressure: 270 bar Power: 132 kW

Condition: used, 10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) Cjdpfshcxvxsx Addehf

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Chjdpfjpqx H Tex Addef Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, feed length W-axis: 1,000 mm, position of the milling head: 360, table load: 1,00,000 kg, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, table length: 4,500 mm, table width: 3,500 mm, quill diameter: 180 mm, workpiece weight (max.): 1,00,000 kg, Equipment: rotational speed infinitely variable, CNC BORING MACHINE PAMA model SPEEDRAM 2000 Hydrostatic Numerical control Siemens Sinumerik 840D X-Axis mm 13,000 Y-Axis mm 5,000 Z-Axis mm 1,200 W-Axis mm 1,000 Total axial travel (Z+W) mm 2,200 Working feed on all axes mm/min 8,000 Rapid traverse X, Z, W mm/min 20,000 Rapid traverse Y mm/min 15,000 Spindle: Boring spindle diameter mm 180 Ram spindle dimensions mm 400 x 440 Spindle speed (3 ranges) max rpm 2,500 Spindle power (S1) kW 91 Rated spindle torque (S1) Nm 9,050 Codpsxuq H Uofx Addjhf Boring spindle internal taper ISO 50 DIN 69871/2 AD-Type Big Plus Clamping plates: 2 units m2 30 + 30 = total 60 Table 1 dimensions mm 6,000 x 5,000 Table 2 dimensions mm 6,000 x 5,000 Load capacity Kg/m2 15,000 Thickness mm 300 T-slot dimensions mm 28 H12 - DIN 650 T-slot pitch mm 250 Rotary-Traverse Table TH 100: Table dimensions mm 3,500 x 4,500 Load capacity Ton 100 Longitudinal (V-axis) travel mm 3,000 Feed/rapid traverse speed V-axis mm/min 10,000 Auto right angle head mod. TS 35 360 Taper ISO 50 - DIN 69871/2 Spindle diameter mm 128.57 Max spindle speed rpm 2,000 Universal head TU 30 360 Taper ISO 50 - DIN 69871/2 Spindle diameter mm 128.57 Max spindle speed rpm 2,500 Facing slide – UT 5-630 S Platform diameter mm 630 Slide stroke mm 200 Max rotation speed rpm 250 Slide feed rate mm/min 1/400 Max machinable diameter mm 1,250 Chain tool magazine cu 130 r80 80 positions Complete with: - Accessory storage with 3+1 positions, closed fixed type - Workpiece probe with radio transmission (Renishaw) - Adaptive technology control - Tool life monitoring and twin tools management - Coolant through spindle - No. 3 chip conveyors USED MACHINE

Condition: good (used), Year of construction: 2004, Steuerung: Siemens 840-D Verfahrweg X: 6000 mm Verfahrweg Y: 3000 mm Verfahrweg Z: 1000 mm Verfahrweg W: 700 mm Spindeldurchmesser: 150 mm Spindeldrehzahl: bis zu 2800 U/min Spindelleistung: 51 kW Werkzeugwechsler: 80 Werkzeuge Chedpfx Ajxn R Nceddef Vertikalfräskopf CNC-Rundtischgröße: 2000 x 2500 mm Tischverfahrweg V: 1500 mm Tischtragkraft: 25 t 2 Stück Bodenplatten Späneförderer Automatischer Kopfwechsler KF-D4 vertikaler Einachsen-Fräskopf, 2,5° programmierbar

Condition: reconditioned (used), functionality: fully functional, Thrust wave drilling unit Chjdpfxsqv Ey Uj Addof electro-pneumatic thrust wave drilling unit Type RPM-S4 3 kW 2850 rpm 4 units in stock

Condition: used, Year of construction: 1974, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW Chodpfx Adotv Ibdjdjf weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without facing plate, without steady rest,

Condition: used, Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Chedpexu Ifhsfx Addef Weight: approx 8 T

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, Max. working width: 740 mm Chedpfx Aoxuggweddof Max. pass-through width: 820 mm Motor: 2.2 kW 23 drilling spindles Horizontal drilling depth: 120 mm Vertical drilling depth: 80 mm Weight: approx. 350 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, table load: 15,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 1,800 mm, spindle stroke: 800 mm, Tos Varnsdorf WHQ 13 CNC boring mill with: - X-axis travel 5000 mm - Y-axis (vertical) travel 3000 mm - Z-axis (cross) travel 2200 mm Cedpfxowtmvxo Addohf - W-axis (quill) travel 800 mm - rotary table size 2500 x 1800 mm - Heidenhain iTNC 530 CNC control - spindle speed 3000 rpm - 60-position tool magazine - high pressure through-spindle coolant - hinged belt chip conveyor - standard accessories included - year of manufacture 2012 - year of installation 2017 0% financing over 12/24 months available

Condition: like new (used), CNC: FAGOR 8055 (retrofit option with Heidenhain Tnc640) Csdpexukfqsfx Addehf Spindle diameter: 110 mm Tool holder taper: ISO 50-7388/1 - DIN 69871 Milling arbor mounting diameter: 221.44 mm Tool clamping force: 1,600 daN Travel Spindle horizontal stroke (Z-axis): 550 mm Spindle vertical stroke (Y-axis): 1,500 mm Table traverse stroke (X-axis): 3,000 mm Column longitudinal stroke (W-axis): 1,300 mm Table Size: 1,500 x 1,220 mm Maximum load capacity: 4,000 kg Max contouring torque: 250 daN T-slots: No. 7, 22 mm, H7 Rapid table rotation: 3 rpm Table clamping torque: 674 daN Speeds and feeds Spindle motor power: 22 kW Speed ranges: 2 Max torque low range: 105 daN Max torque high range: 31 daN Spindle speed range: 15 - 3,000 rpm Constant torque, low range: 15 – 203 rpm Constant torque, high range: 50 – 680 rpm Constant power, low range: 203 – 895 rpm Constant power, high range: 680 – 3,000 rpm Working feedrates: 2 – 10,000 mm/min Rapid feedrates: 10,000 mm/min Maximum axis thrust: 1,600 daN Tool magazine Number of tools: 60 Chain pitch: 140 mm Max tool diameter: 138 mm Max tool diameter (adjacent pockets empty): 400 mm Max tool length (excluding taper): 400 mm Max allowable tool weight: 30 kg Tool holder taper: ISO 50-7388/1 - DIN 69871 Overall weight: 24,500 kg Machine dimensions (L x W x H): 5,350 x 4,770 x 3,700 mm Machine equipped with: • Brushless motors • Through-spindle coolant • Quill stiffener • Heidenhain linear scales • Operation and maintenance manuals

Condition: used, Automatic throughfeed drilling machine with automatic workpiece transport for throughfeed of the workpieces Left machine side fixed, right side adjustable over the entire machine length Price € 3,900 in untested as-is condition, freely loaded onto truck >> the MERCEDES among the automatic drilling machines with the highest quality Made in Swabia Cedpeqy D T Tofx Addohf

Year of construction: 1996, condition: ready for operation (used), Control Unit Codpsxfculefx Addehf Brand HEIDENHAIN Model TNC 426 Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Number of axis 5 Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Chjdpjxuf Utsfx Addef Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Cedpfx Asxuf Uaeddshf Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T