Used Smoker Meeting Point for sale (9,090)

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm Iasdpoyabirsfx Adwel diameter 5-50 mm current capacity 70 kVA weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2006, Technical details: grinding diameter: 5-55 mm grinding length: 500 mm total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm * Iaedevg Thispfx Adwjl

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 11000 kg Ijdpfxjx D Inuj Adwjal This 3-axis JUNKER QUICKPOINT 5002/10 was manufactured in 2002. It features a Siemens control system, Marposs measuring, and CNC-controlled Z-axis and grinding spindle head. With a grinding length of 1000 mm and a diameter up to 280 mm, it's ideal for precision surface grinding. Consider the opportunity to buy this JUNKER QUICKPOINT 5002/10 surface grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: like new (used), As new with many accessories. Ijdjxga Sqjpfx Adwoal

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: • Seriennummer: 71110476, Device 2: • Manufacturer: PBI Dansensor • Model: LeakPointer • Serial number: 71110476 • Year of manufacture: 2011 • Purchased: 2013 • Purchase price: Unknown, invoice not available. • Documentation available Iasdpfx Adoxxxa Djwel Sale price: 500 EUR per device.

Condition: used, Year of construction: 1997, functionality: fully functional, BOBST Domino 90-A1 Folder Gluer for sale! Year 1997 Cold glue system ERO with 4 glue guns Max width 900mm Iajdexnzq Dopfx Adwjl Min width 126mm Max speed 400m/min

Condition: used, Year of construction: 2009, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 4007342, pressure dew point: 3 °C, pressure (max.): 14 bar, Equipment: type plate available, Beko Drypoint RA 120, for collection, location Hildesheim 31137, still connected, test run possible Iajdpfxjw Slhpe Adwjl

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2352, center height: 200 mm, grinding length: 500 mm, grinding diameter: 55 mm, rotational speed (max.): 5,970 rpm, controller model: Siemens Sinumerik 840-D, TECHNICAL DETAILS Grinding diameter: 5–55 mm Grinding length: 500 mm Workpiece diameter: 5–55 mm Workpiece length: max. 500 mm Grinding wheel arrangement: right, 30° inclined Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW Ijdpfx Asxvxl Iedwsal X/Z-axis drive: ball screw Travel speed: 0.01 – 10,000 mm/min Resolution: 1 µm Workpiece spindle runout: < 1 µm Spindle speed max.: 5,970 rpm Workpiece changing system: Fanuc robot Control system: Siemens Sinumerik 840-D MACHINE DETAILS Total power requirement: 44 kW Centre height: 200 mm Machine weight: 7,000 kg EQUIPMENT Tailstock Longitudinal adjustment: manual Rotating centre: Junker standard, diameter 75 mm Clamping pressure: adjustable via hydraulic system Tailstock dimensions: diameter 100 mm × 430 mm

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Isdpfsxc Nypjx Adweal Subject to prior sale!

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Iodpoxuf Hvjfx Adwjal Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 71040038, Unit 1: • Manufacturer: PBI Dansensor • Model: LeakPointer Iodpfx Adexxw Tiowoal • Serial Number: 71040038 • Year of Manufacture: 2004 • Purchased: 2011 (as used equipment) • Purchase Price: Unknown, invoice not available. • Documentation available Weight: 50 kg

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. Iasdpfxowz Ry Do Adwel The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: good (used), Year of construction: 2015, Energy Saving Refrigerant Dryer Iodpfx Adog A Hcxswjal Build in 2015 Pressure 14 bar

Year of construction: 2026, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW PTO drive Tractor pump Iaedpfx Aefw A D Nodwol

Condition: used, Year of construction: 1978, Year ca. 1978 für Stangenprofile und... ... für Flachmaterial material thickness max. 24 mm working length 300 - 600 mm efective widths 3 mal 170 mm drive motor 400 V, 11 kW, 50 Hz . +++++ Iaedpfox U A I Tex Adwsl Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm Iodjhmfh Hspfx Adwjal

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, Pointing range: 7,0 - 1,5 mm Iodeh U A Sfjpfx Adwsal Number of kalibers: 16

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 Iaodpfx Aewvgwhedwsl -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling Iedpfx Adshzg Ihowjal

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Iedpfx Adohm S Rujweal Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, Year of construction: 1990, Folding tap pointer . tube diameter 5 - 20 mm tag length 50 - 100 mm Iasdjit Ewfjpfx Adwjl total wight 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1986, condition: like new (used), More information on request Iaedpfx Aohmfnhodwjl

Condition: used, functionality: unexamined, Ferwood Code: RU0008927 - Manufacturer Code: 631417600 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ijdpfx Adjv Hpx Dowsal

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Iajdpfx Adewvgqhowol -Manufacturer: Röhm / unknown, rotating centering points 3 pieces -Type: Röhm 110HVL MK5 / 2x without type designation -Recording: MK5 -Price/Delivery: complete -Transport dimensions: 280/270/H95 mm -Total weight: 14.3 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, revolving centering points 4 pieces -Type: Röhm 158 MK4 / Bokö Perfekt 4P / 2x without type designation -Recording: MK4 Iajdpfewvg Nwex Adwsl -Price/Delivery: complete -Transport dimensions: 230/210/H70 mm -Total weight: 8.2 kg