Used Soft Start for sale (7,760)

Condition: used, Year of construction: 2025, Block cutter BS252 - grit size 0 - 35/40 mm Blocks in the wear zones are welded with armored wire. Adapter Oilquick OQ70/55 - not included in the price – available upon request. Excavators from 26 t / wheel loaders from 14 t Cutting width 1500 mm / 5 shafts Capacity 2.25 m³ Throughput / hour 80 - 122 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clumps. - Aerating, crushing, shredding, and turning biomass, organic waste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating smaller pieces in mm, while larger and harder parts remain in the separator. Codszv Rf Tepfx Aptsrg - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.155 - the bearings are maintenance-free, and the chain boxes contain a grease that is distributed by the movement of the bucket and the running of the chain, ensuring lubrication at every point. Therefore, the Terra-Star TSP.155 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Mixing rotor M80X - grain size 0 - mm Mixing blocks in the wear zones with armored wire welded on without adapter – available upon request Excavators from 14 t / wheel loaders from 10 t Cutting width 1500 mm / 4 rotors Capacity 1.25 m³ Throughput / hour 44 - 65 m³/hour Codpozv Rfyjfx Aptjrg Working pressure 200 - 260 bar Oil flow rate 150 - 180 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing easily brittle rocks in construction debris, such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSC.154 - the bearings are maintenance-free, and the chain housings contain grease that, through the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSC.154 does not need to be greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Screening drums with star discs, separation distance 15 mm Medium screening – grain size 0-20/25 mm Star discs in wear zones with hardfacing using armored wire Adapter OQ70/55 – not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 drums Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Separating stones, branches, roots, turf, debris, etc. from still usable waste soil, for example, for topsoil in landscaping. - The mixing of compost, sand, substrate, etc. with the soil during the screening process is easily possible. - Screening out coarse stones from excavated soil Credpfjzv Rfaox Aptog - Screening out stones from mixed soil after demolition. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain grease that ensures lubrication at every point through the movement of the screen and the rotation of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Sieve roller star screen, separation gap 30 mm Coarse screening – grain size 0-35/40 mm Adapter OQ70/55 – not included in the price – available upon request Excavators from 24 tons / wheel loaders from 13 tons Cutting width 1500 mm / 4 rollers Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min Crodpfx Apozv Rd Aotog - Separation of stones, branches, roots, turf, debris, and still usable waste soil, for example, for topsoil in landscaping. - Mixing compost, sand, substrate, etc. with the soil during the screening process is easily possible in a single step. - Screening out coarse stones from excavated soil. - Screening out stones from mixed soil after demolition. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the bucket and the rotation of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not require additional lubrication and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2026, Block cutter BS254 - grit size 0 - 30/35 mm Blocks in the wear zones are welded with armor wire. Currently, an OQ70/55 adapter is installed – not included in the price – available upon request. For excavators from 18 tons / wheel loaders from 10 tons. Cutting width 1200 mm / 4 shafts Capacity 1.50 m³ Cjdpfx Apjzv N E Setorg Throughput / hour 52 - 77 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., which cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating smaller pieces in mm, larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.124 – the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.124 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2026, Mixing auger M80X - grit size 0 - mm Mixing blocks in wear zones with armored wire welded on Adapter OQ70/55 - not included in the price – available upon request Excavators from 14 t / wheel loaders from 10 t Cutting width 1500 mm / 4 augers Capacity 1.25 m³ Throughput / hour 44 - 65 m³/hour Working pressure 200 - 260 bar Oil flow 150 - 180 l/min - Incorporating lime or mixing binders to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clumps. - Aerating, crushing, tearing, and turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing easily brittle rocks in construction debris, such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments (mm), with larger and harder parts remaining in the separator. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSC.154 - the bearings are maintenance-free, and the chain housings contain grease that ensures lubrication at every point through the movement of the blade and the rotation of the chain. Therefore, the Terra-Star TSC.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter Cedszv N Exopfx Apterg

Condition: used, Year of construction: 2026, Mixing shaft M80X – grain size 0 – mm Crodpfxezv N Dho Aptjg Mixing blocks in the wear zones with Panzerdraht 600 HB welded on Adapter system Lehnhoff MS08 - not included in the price - available on request Excavators from 6 t / wheel loaders from 4 t Cutting width 1000 mm / 3 shafts Capacity 0.45 m³ Throughput / hour 16 - 23 m³/hour Working pressure 200 - 250 bar Oil requirement 50 - 60 l/min - Mixing in lime or mixing binders to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating clods, larger, and hard parts remain in the separator. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. TSE.103 - the bearings are maintenance-free; the chains should be sprayed with chain spray through the maintenance flaps every 20 operating hours. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Mixing rotor M80X - grit size 0 - mm Mixing blocks in the wear zones are reinforced Adapter Likufix SW48 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Csdpfezv N A Rjx Aptjrg Working pressure 280 - 300 bar Oil flow rate 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously breaking up soil clumps. - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be shredded. - Shredding easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain a lubricating grease that, through the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2026, Mixing rotor M80X - grain size 0 - mm Mixing paddles armored in the wear zones Crodpfxezv N Awo Aptjg Adapter OQ80 - not included in the price - available upon request Excavators from 24 tons / wheel loaders from 13 tons Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, bio-waste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain cases contain grease that provides lubrication at every point through the movement of the blade and the running of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. Csdpfx Aszr Hi Hoptorg With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! Crjdpezr Hgrsfx Aptog About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: new, Year of construction: 2026, Screening drum with star discs, separation distance 15mm Medium screening - grain size 0 - 20/25mm Adapter system Lehnhoff MS03 - not included in the price - available upon request Excavators from 4 tons / wheel loaders from 3.5 tons Cutting width 800 mm / 3 drums Capacity 0.30 m³ Throughput / hour 10.5 - 15 m³/hour Credpfszvfrnjx Apteg Working pressure 200 - 250 bar Oil requirement 50 - 60 l/min - Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil, for example for topsoil in landscaping. - The simultaneous mixing of compost, sand, substrate, etc. with the screening process is easily possible. - Screening of coarse stones from excavation soil - Screening of stones from mixed soil after demolition. - Feeding clumped soil onto a screening system reduces waste and increases throughput. TSE.083 - the bearings are maintenance-free; the chains should be sprayed with chain spray every 20 operating hours via the maintenance flaps. Dimensions and weight without adapter.

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, Codpsttgy Hefx Aptorg 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Csdpfott Dqpsx Aptsrg Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels Crsdefd Ilyepfx Aptsg

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Csdpett Iudefx Aptsrg Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), "SOFTFORMING" LEFT-side SINGLE-SIDE SIZING and EDGE BANDING Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control / Software PC 22 / WoodCommander Adjustable feeding speed (m/min ) 10 - 40 Working line (work units support tables), manual adjustment mm 30 - 80 SIZING PART: Spraying unit (Anti-sticking liquid) Double Hogging Units KD 10 (2 x Kw 6,6) Fine Trimming unit for softforming (2 x Kw 1,85) 0°-20° Belt sanding unit (abrasive papers) for straight edge KS 10(mm 120 x 2100) Free space mm 700 EDGE-BANDING PART: Glueing Unit (Hot Melt + Quick Melt Unit) E34 softforming Crodpfx Apst N H Tastsg Pressing rollers (revolver) both for straight and shaped edges (softforming) G (4 stations) With top and bottom rolling knives (In-lay) Edge coils supporting unit E3 (No. 6 of reels) Snipping (end-cutting) unit HL 84 (2 x kW 0,8) 0°-30° (max 25 m/min) 1st Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic 2nd Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic Milling grooving unit UF11 (1 x kW 4) 0°-90° Profile Scraping unit PN20 (Pneumatic adjustment) Finish processing unit (Glue scraper + Buffing unit) FA11

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: Crsdpfx Aezk N Dweptsg - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: good (used), Year of construction: 2019, In stock is a well-preserved CNC doweling machine STARTECH CN Plus. The price is excluding VAT. Codjwtnluepfx Aptsrg

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System Crodpoyxcqvjfx Aptog + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: new, maximum load weight: 1,078 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 300 mm, total length: 3,765 mm, total width: 1,310 mm, total height: 830 mm, Year of construction: 2026, Humbaur Startrailer with cover and supports LH1500 Price - 2350 EUR incl. 19% VAT, cover and supports included, incl. 6.4% delivery fee and vehicle documents Technical data: * Trailer type - Single-axle * Construction - Aluminum * Weight - 231 kg * Total weight - 1,300 kg * Payload - 1,078 kg * Internal length - 2,510 mm Credpfxszphqme Aptog * Overall length - 3,765 mm * Internal width - 1,310 mm * Overall width - 1,800 mm * Internal height - 300 mm incl. cover 1,600 mm * Overall height - 830 mm incl. cover 2,150 mm * Loading height - 530 mm * Tires - 14 inches Standard equipment: 13-pin connector * Side walls made of anodized, double-walled aluminum profiles * Fixed front wall and flap with sturdy latches * Lashing eyes integrated into the side walls, tensile force 400 kg per lashing eye, Dekra tested * Multifunction lighting integrated into the underride guard * Corner posts with slots for attachments * Pre-assembled mounting buttons for cover attachment to the side walls Description: Do you need to transport garden waste, small bulky items or larger purchases? Then the low-loader Startrailer will inspire you. It is particularly light, versatile and looks good. Note, for example, the attractively designed, discreet latches of the rear flap.

Condition: excellent (used), functionality: fully functional, Anton Paar Physica MCR 301 Modular Rotational Rheometer Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Machine Type: Modular Rotational and Oscillatory Rheometer Country of Origin: Austria (Graz) For sale is a used Anton Paar Physica MCR 301 rotational rheometer. This laboratory device is suitable for the rheological characterization of liquids, pastes, polymers, dispersions, emulsions, and other materials in research, development, quality control, and industrial material testing. Technical Data Measuring Principle: Rotational and Oscillatory Rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Integrated normal force measurement Modular measuring system for various measuring geometries Power Connection: AC 100–240 V Power Frequency: 50–60 Hz Power Consumption: 850 W Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measuring Functions Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Crsdpfszicwuex Aptjg Amplitude sweeps Frequency sweeps Material characterization Software / Interfaces Anton Paar Rheoplus Software (Original CD) Device driver and license diskette included RS-232 interface Ethernet interface (depending on the configuration) Operation via LCD display and foil keypad Environmental Conditions Operating Temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage Temperature: −20 °C to +50 °C Relative Humidity: 20–60 % (non-condensing) Equipment Air-bearing precision drive Measuring head Measuring platform LCD display Electronic control Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Application Areas Rheology Material testing Quality assurance Research and development Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Universities and testing laboratories Condition Used Optical condition as shown in the pictures. Scope of Delivery Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder License diskette Connection cable Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark Metal Analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of datasets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In like-new condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grid/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples A groundbreaking spark excitation and optical design to ensure the best performance in its class An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both new users in production and experienced laboratory staff The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. W x H x D 0.80m x 0.45m x 0.70m Codpfxeziar Ne Aptorg Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tires with rim (2 pieces) -Tire size: 3.00-4 -Bolt circle: Ø 70 x 9 mm -Recess: Ø 48 mm Price/Quantity: 2 pieces complete -Dimensions each: Ø 250 x 90 mm -Weight: 4.4 kg/piece Credpfx Asxal Htsptjg

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tire with rim and sprocket Codpjyliypjfx Aptjrg -Type: GLE 4.00-4 -Hub: Ø 228 mm -Tooth ring: Ø 20 mm / 55 teeth -Submission/Price: complete -Dimensions: Ø 300 x 245 mm -Weight: 22.7 kg/pc.