Used Soldering for sale (102)

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm Lrjdpfxjhtn Sbs Adwog -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Max. air flow rate 2900 m³/h Inlet diameter 200 mm Ledpfxeycic Sj Adwerg Max. negative pressure 3500 Pa Drive power 4.0 kW Filter area 24 m² Filter elements 2 pcs. Dust collection bin 38 l Dimensions 1,660 x 840 x 1,640 (L/W/H) mm Weight 310 kg Sound pressure level 72 dB(A) Metal chips Metal dusts Plastic dusts Plastic chips Cotton dusts Paper dusts Welding fumes Soldering fumes

Condition: new, 2500 m³/h 2500 kPa volume capacity 1600 m³/h feed volume > 99 % 1,1 kW 72 dB(A) 0,58 x 0,58 x 0,9 m 80 kg 230 V / 50 Hz V Particle pre-separator: coarse filter, pre-filter Main particle separator: main filter Gas separator: activated carbon filter Hose arm: joints inside What is the filtoo? The filtoo filter device newly developed by TEKA is a mobile filter system, for many tasks in the area of ??filtration of smoke and dust and gases can be used. The device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%). at The filtoo is intended to be used for the separation of smoke suitable, which by welding separation and joining processes at the Machining of unalloyed steels, including high-alloy chrome / Nickel steels are released. How does the filtoo work? The Polluted air sucked into the filter system. In a multi-level Lrjdpfsgvq E Dex Adwsg The filter process filters the particles / gases from the air stream and the clean air is fed back into the work area. Where can the filtoo be used? At welding workplaces, in the workshop area, for soldering applications, at Restorers and locksmiths. What do you get for your money? All you get is a completely ready-to-use "plug and play system" the recording device must be connected before commissioning. How is the filtoo set up? The housing is made of a stable sheet steel construction and is inside as well as provided with a powder coating on the outside. The filter elements are over A maintenance hatch is accessible and can therefore be accessed very easily and quickly can be removed. The system has functional controls.

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals Lredpfx Adsxaal Rowjg - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Lrjdpfjr Eqbyex Adwjg Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries. Lsdothitpepfx Adworg

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Lrsdpfx Ajthithsdwsg Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1000W LCH-1000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 2000W LCH-2000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Ljdpjthittofx Adworg Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: good (used), Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h Lredpfstvb Dxex Adwog -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm -Weight: 130 kg

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction -Drive: 0.75 kW -Volume flow rate: ³/h -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 3x welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc. Ljdpfx Adex I Aknowerg

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Lredex R Dtpopfx Adwog

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Lrodpfxsn Armae Adwsg Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg Ljdpfexfvldox Adwerg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction Lodpfsx Hvqfjx Adwjrg -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: good (used), Year of construction: 1992, Mobile welding fume filters, welding fume extraction, soldering fume extraction -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg Lrsdpfjb A Sbmsx Adweg

Condition: good (used), Clamp welding machine, foil welding machine Lodpfx Adeb A Sm Dowsrg -Connection: 220 V -Working width: 300 mm -Weight: 10 kg

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Lodpsx H Ryujfx Adworg Measurement: insufficient, excessive, or missing solder paste bridging paste deformations volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Condition: like new (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total width: 160 mm, total length: 12,600 mm, overall weight: 4,300 kg, Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 78 cm (box type as per attached tables) - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 250-650 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - 4 adhesive application stations (2 front and 2 back). - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - The first pre-loading unit can be adjusted to 180°. The second and fourth folding unit are adjustable to 180°. The third bending unit is at 135°. - Cold glue tank for soldering with metering wheel. - Two additional and movable glue tanks placed on top for automatic production of the box base. (The stations can be easily coupled or uncoupled). - Prefabricated folded and glued boxes are transported to an adjustable pressing station and then to disposal. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section Lodpfomcw Tdox Adworg - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 12.600 x 1.500 x 1.400 mm - Weight: 4.300 kg Price EXW negociable - 59.000 euro + VAT (without VAT in EU)

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Lrsdpfx Adsu Af Abswsg

Year of construction: 2017, condition: used, functionality: fully functional, Manual SMT stencil printer for solder paste for stencils 520 x 520 mm Lredpfxjx Ea Nae Adwsg Quick clamping system: SPGEN-SP004-ML (520 x 520 mm)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Lsdpjxt Dq Refx Adworg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Lrodpfx Asxzug Sedwog Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 Lodpfx Adox A S Txswerg - Transport trolley TY2A - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning Lrsdpfx Adexrgl Ijweg - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Ledpfx Aeg Eglpodwsrg Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.