Used Torches for sale (422)

Condition: not inspected (used), Welding/Cutting Torch Set Stock number: Manufacturer: unknown, possibly Apolda Nsdpfx Ao Aavp Aoirslh Consisting of: optical assembly hose set, hose lengths approx. 8 m torch pressure gauge additional hose set approx. 4 m Complete set, see images.

Condition: used, functionality: fully functional, cutting current: 130 A, HYPERTHERM HYPERFORMANCE HPR130XD – 130 A PLASMA GENERATOR WITH TORCH AND CONNECTIONS Nedps Aduqtsfx Airjlh B&B Waterjet Abrasive is offering for sale a used, disassembled, and functional Hypertherm HyPerformance HPR130XD plasma generator. INCLUDED EQUIPMENT • Hypertherm HPR130XD generator • Gas console as shown in the photographs • Hypertherm torch with support as shown • Connections included Plasma source for mechanized cutting, intended for integration into a compatible system or for replacing an existing source. Cutting table and CNC control not included. TECHNICAL DATA OF THE MODEL • Maximum cutting current: 130 A • Carbon steel: burr-free cutting up to 16 mm, production piercing up to 32 mm, maximum cutting up to 38 mm • Stainless steel and aluminum: production piercing up to 20 mm, maximum cutting up to 25 mm Rated capacities declared by the manufacturer, dependent on material, gas, consumables, and processing conditions. These do not constitute a test performed on the unit for sale. CONDITION Disassembled, functional generator, currently disconnected. Year of manufacture and operating hours not available. Compatibility and equipment must be verified in relation to the intended system. REQUESTED PRICE: € 5,500 + VAT Transportation and installation not included. For further information and to arrange pickup, please contact B&B Waterjet Abrasive via the portal.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A Nljdpfx Aoy Annbjiroh ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Nsdpfxsztu Aqe Airolh Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: excellent (used), Year of construction: 2012, operating hours: 838 h, functionality: fully functional, overall weight: 268 kg, load capacity: 3 kg, arm reach: 1,434 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, repeat accuracy: 0.08 mm, Equipment: documentation/manual, Yaskawa MA1400 + HP20D robot system – only 838 servo operating hours. Two robots, coordinated operation, and flexible welding capabilities. For sale: a Yaskawa robot system in very good condition, tested and fully functional, for arc welding and material handling applications. The system includes a DX100 controller, a Fronius TransSteel 5000 welding power source, an automatic torch cleaner, and a well-equipped Siegmund welding table with a plasma-nitrided surface. Master-Slave control – Jigless welding. The two robots can operate synchronously: the 20 kg payload HP20D holds and rotates the workpiece in front of the MA1400 welding robot. For small parts, a pneumatic gripper allows for complex welding operations without a separate workpiece positioner. Remarkably low servo operating hours: only 838 hours. Nledpfx Aijz Rn Igersh Main components: • 1 x Yaskawa MA1400 arc welding robot arm • 1 x Yaskawa HP20D material handling robot arm with a 20 kg payload capacity • Yaskawa DX100 controller with Master-Slave functionality • 1 x Fronius TransSteel 5000 arc welding power source • 1 x Yaskawa TCS-C automatic torch cleaning unit • 1 x Siegmund S16 welding table, 1500 × 1000 mm, with an aluminum frame, height-adjustable legs, and a plasma-nitrided steel tabletop. Includes 4 screw clamps, 8 quick-release bolts, 4 aluminum stops, and 4 aluminum squares. Part number: 2-WS161510.1 • 1 x Siegmund S16 Basic Set #2: 10 stops, 10 squares, 16 fastening bolts, 8 clamps, and a 6-piece accessory and maintenance kit. Part number: 4-161300 The equipment can be viewed by prior arrangement. Price: EUR 59,000 net.

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Nedpfxjmxklhj Airolh Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Further information Fan type - Suction turbine Hose connection - ~45 mm x 2

Condition: ready for operation (used), Year of construction: 2001, consisting of - rotary/swivel device Motoman Robotec, year of manufacture 2001 - 2 welding robots Motoman Robotec - 2 torch cleaning devices - 2 welding transformers Leipold LSQ4 - 2 wire feeders - 2 recirculating air cooling units EWM UK500 and UK500R - control system Motoman Robotec XRC - 2 control systems Leipold Multiprocess-Q8P - control system Siemens Simatic HMI / Simatic OP17 Nedpo Afdm Tsfx Airelh - widescreen TFT monitor HP, 23 inches Further information can be found under "Visit Auction".

Year of construction: 1986, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor Nedpfx Aofc R Dweirslh -Oxyfuel cutting system: Oxyfuel cutting machine -Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Nodpszizkyofx Airelh Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 28244704, total height: 800 mm, total length: 720 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 70 kg, type of cooling: water, hose package length: 950 mm, electrical fuse: 63 A, open-circuit voltage: 74 V, welding current at 100% duty cycle: 500 A, space requirement height: 900 mm, space requirement width: 350 mm, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 600 A, Equipment: type plate available, MIG/MAG welding machine from the brand Fronius. The machine is water-cooled, has 600 amps, and features all the necessary settings for various arc types (Pulse/Standard/LSC/PMC). The welding system was mounted on a KUKA robot for testing purposes; all accessories required for installation or use on a robot are included in the scope of delivery! In excellent condition, including spare guide tubes and a magnetic box for torch holder. Nlodpfx Aez Eg Hvoirsh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ABB Robotics IRB 1400 S4C + M2000 robot with rotating table and Fronius TPS 3200 welding machine, as well as Fronius torch cleaner. Number of axes: 6 Nsdpfx Aoz Rk Uioirslh Max. payload: 5 kg Max. working range: 1450 mm Year of manufacture: 2003 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams, floppy disk drive for data backup, Fronius TPS 3200 pulse welding machine, rotating table, Fronius robot hose package. Used – shows normal signs of wear, but is fully functional. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: Nljdpsy Snwnsfx Aireh - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Nledpfxezibqaj Airoh Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Nledpfsyr Aiwex Airsh Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. Nlodpfx Aijz Rivfsrsh • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: used, functionality: fully functional, overall weight: 7,500 kg, total length: 14,470 mm, total width: 3,500 mm, total height: 1,509 mm, We offer this used CSM automatic tube welding system, manufactured in 2014. Our general terms and conditions apply. Payment in advance required. Shipping costs not included. If you have any questions or require further information, please send us a message or call us. Recommended tube diameters: 5 - 15 mm Wall thicknesses: 0.40 - 1.00 mm Using the profiling unit, a stainless steel strip from a coil is formed into a tube by passing through seven profiling stations. The continuously profiled tube is welded in the welding chamber (TIG) in a continuous process. The torch tracking system can detect and automatically correct changes in the position of the material joint relative to the arc during the welding process. A measuring wheel mounted on the continuously moving tube continuously measures its speed and records the length. A double straightening device eliminates any residual curvature of the tube during the continuous process. A flex unit continuously cuts the tube and places it on the sorting rail for tubes that meet or do not meet the quality requirements. Two deburring stations deburr the tube ends, and an automatic length measurement system measures each tube before it is placed in the box. The tube welding system is fully functional and can be inspected while in operation. Nljdpfoz Hk Erjx Airoh

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Njdjzamffopfx Airjlh Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of cooling: water, CoWelder with Universal Robots UR10 – Migatronic Pi 350 AC/DC We are offering for sale a CoWelder robotic welding system with Universal Robots UR10, complete with Migatronic welding equipment. The system was purchased in 2021 and has been used in production, but only to a limited extent. It is in good condition and available for immediate sale. Equipment included: CoWelder robotic welding system Universal Robots UR10 collaborative robot Migatronic Pi 350 AC/DC welding power source Cold Wire Feeder (CWF) Water-cooled welding torch The system is suitable for automated and repetitive welding applications and can be used for a wide range of welding tasks. Technical information: Manufacturer: Migatronic / Universal Robots Model: CoWelder / UR10 Robot: Universal Robots UR10 Welding power source: Migatronic Pi 350 AC/DC Cold Wire Feeder: CWF Water-cooled welding torch Year of purchase: 2021 Condition: Used, good condition The welding/work table is not included in the sale. Nodez D Uufopfx Airolh The equipment can be inspected by prior arrangement. Price: EUR 34,900 net + VAT The equipment is sold as a complete set.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine Nlsdpfx Aieyxvwijreh • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Nsdeyah Saepfx Airelh Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: new, functionality: fully functional, input voltage: 400 V, type of cooling: air, welding current (min.): 30 A, welding current (max.): 400 A, input frequency: 50 Hz, iROB 401 AC/DC – MIG/MAG welding power source, new unit from stock, original packaging The iROB MIG/MAG welding power source from Abicor Binzel offers the following process options as an automation solution: • mX Standard for all base materials – the standard DC process without pulse, • mX Pulse – pulsed welding process for different penetration profiles, • mX Move DC – for TIG weld appearance / aluminum, as well as other functions. * MIG/MAG welding power source for robot applications * Welding current: 30–400 A * Processes: DC, Pulse, Move DC and others Nlsdj Afdriepfx Airsh * Air-cooled * 3 × 400 V, 50/60 Hz * Fieldbus interface, e.g. EtherNet/IP * Connections for control cable, torch and MPP * Dimensions: 395 × 710 × 760 mm * Weight: 83 kg * Manufacturer: ABICOR BINZEL, Germany * Multiple units available * Accessories such as cooling unit, WiFi router, trolley and base are available as options * Extensive accessories (including torches) and other automation components are available. Please do not hesitate to inquire. Delivery/shipping possible at extra cost. Image shows a similar product image, including optional accessories (trolley).

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Nodpfoyah R Nsx Airolh Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: excellent (used), Cutting nozzle, welding torch, plasma torch, hand arc piercing torch, gouging torch, torch accessories, torch nozzles, cutting nozzles, flame cutting system, torch -Manufacturer: Hypertherm, extensive range of plasma torch accessories unused Ovp -Type/Quantity: see photos / parts list Nledpfxew Ud Dbs Airoh -Ring electrode: iht 6534-1-100 3 pieces -Price/Delivery: complete -Transport dimensions: 360/280/H165 mm -Weight: 3.8 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, input voltage: 400 V, total length: 13,000 mm, cutting current: 300 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 12,000 mm, type of cooling: water, Here is the sales listing translated into professional English: Nedpfx Aezy I S Esirelh For Sale: Teknohaus Thermcut 4500 P Gantry Cutting Machine (Bevel Plasma & Oxy-Fuel) For sale: A modern, industrial-grade Teknohaus Thermcut 4500 P gantry cutting machine, manufactured in 2021. This system combines high-precision Hypertherm XPR300 bevel plasma technology with IHT Automation oxy-fuel cutting, offering a versatile range of cutting capabilities from thin sheet metal to heavy plate cutting and beveling. Key Specifications Manufacturer: Suomen Teknohaus Oy Model: Thermcut 4500 P Year of Manufacture: 2021 Supply Voltage: 3 x 400 V Dimensions & Capability Cutting Area / Table Size: 2,500 mm x 1,200 mm Bevel Plasma Capability: Enables direct cutting of weld preparation bevels (e.g., V, X, Y, and K bevels) directly from the plate. Equipment & Features Plasma Power Source: Hypertherm XPR300 (X-Definition technology, 300 A) Oxy-Fuel Cutting: IHT Automation / GCE FIT+ torches with dedicated gas control panel (Preheat / Propane / Cutting / O₂) Control System: Modern CNC control unit with touchscreen and physical controls Safety Features: Emergency pull-wire safety system along the table sides and comprehensive safety labeling Cutting Capacity (Hypertherm XPR300) Mild Steel: Piercing up to 50 mm (Argon-Assist), Severance up to 80 mm Stainless Steel & Aluminum: Piercing up to 38 mm / Severance 50–75 mm The machine is in excellent working condition and has been well-maintained in an industrial production environment.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Nledpezvm Anofx Aireh Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!