Used Sorting System for sale (40,776)

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Bsdezgci Espfx Aktolp Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone. Blsdpjzgckcefx Aktop

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Bljdpezd Ut Rofx Aktop Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), mileage: 1,45,863 km, power: 302 kW (410.61 HP), first registration: 10/2008, fuel type: diesel, axle configuration: 6x6, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 8,820 mm, total width: 2,550 mm, Equipment: crane, Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Rotator: ✓ = More information = General information Year of construction: 2008 Cab: single Registration number: BV-ND-28 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.805 kg Carrying capacity: 17.880 kg Bodpfxezfa Upo Aktelp GVW: 34.500 kg Max. towing weight: 50.000 kg Functional Crane: PALFINGER E 165 Z, year of manufacture 2008, behind the cab Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 Bjdpfx Akezdqkretelp The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Bodpfx Akjzdrzrotolp Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Bljdpfezdtffox Aktop Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), 515 USED Industrial - bakery TOOLBOX DispoTool system designed for order picking and distribution - complete set. The system is designed for use in bakeries, confectioneries, production plants, warehouses, and distribution centers, wherever the organization of larger order picking is required. Blodpfx Akozyqgfetjp EQUIPMENT: - 23 color Toolbox DispoTool LED displays - Guides/rails with display mounting brackets - 3 computer stations with label printers - Installation components and cabling are shown in the photos The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel Blodpsdbny Ejfx Aktep • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 6200 mm (690 + 5280 + 230) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Blsdpfx Aol Dxawsktep Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Year of construction: 2007, condition: good (used), Laboratory fume hood, fume hood, extraction cabinet, extraction fume hoods, fume hood system for pharmacies, chemical and medical applications, extraction system, filter system -Extraction: aggressive, chemical gases -Internal dimensions: 540/850/H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge Blsdpfxjb Uhnqs Aktop -Connection: 0.085 kW -Suction type: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection Bsdpfxjhkzu Aj Aktjlp with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Blodpfxohk S Sds Aktop Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Please choose the desired size: new, galvanized: Depth: 305,381,457,610,762,914 width: 610,762,915,991,1219 Special load: 100-250 kg/Shelf Metric scaling: new, galvanized Depth: 300,400,500,600,700,800 Width: 800,1000,1200 Special load: 120-250 kg/shelv Stand size: new, galvanized 2 m, 2.5 m, 3 m, 4 m Used, RAL 7042: 610 * 915 mm For larger purchases, we offer a discount. Ask our price for Transport cost. Bodpfsduz Sqjx Aktelp We are dealing with rebuying, selling, assembling the shelves. Here you can find pallet racks, cantilever racks etc.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Blodpsxx Swvofx Aktop Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 2,000 kg, total length: 4,500 mm, total height: 5,180 mm, shelf height: 5,180 mm, load capacity: 6,000 kg, overall weight: 16,250 kg, frame height: 5,180 mm, Ohra racking system with 11 units. Includes push-through safety stops and galvanized support grids. See pictures. Bsdpoya Dg Hefx Aktolp

Condition: excellent (used), SIEMENS TELEPERM measuring transducer 315 bar Further data: see photos The measuring transducer is available in multiple units. Blodpoxmv Inefx Aktjp

Condition: excellent (used), MiVeg System 4080 skewering system for meat and veg kebabs. These are a far more reliable system than the normal French machines sold for this job. Cost new was EUR 160,000 Bodpfx Akeu Tty Hstolp

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Blsdpfeznli Dex Aktsp Manufacturer: MANZ PLC control, touch screen display, Siemens

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Bodpfx Asy Dc R Tektslp Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) Bjdpfx Akjy Dt D Djtolp We are happy to answer any further questions you may have by phone.

Condition: excellent (used), mileage: 1,48,777 km, power: 552 kW (750.51 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, fuel tank capacity: 1,000 l, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum Fuel Tank - High Beam Lights - Low Noise - Speed Limiter - Cab - Refrigerator - Leather Interior - Leather Upholstery - Air Suspension - Air-Suspended Seats - Media System - Metallic Paint - Rotating Beacon - Reversing Camera - Sleeper Cab - Sun Visor - Lane Keeping Assist - Auxiliary Heater - Toolbox - Power Take-Off (PTO) - Central Lubrication System - Tow Hitch = Additional Information = General Information Year of Construction: 2024 License Plate: 19-BXV-1 Technical Information Number of Cylinders: 6 Engine Displacement: 16,123 cc Transmission: I SHIFT, Automatic Front Axle: Steerable Rear Axle 1: Dual Tires; Lift Axle Weights Unladen Weight: 13,669 kg Payload: 18,331 kg GVW: 32,000 kg Functional Body Brand: VDL S 26 Pump: Yes Interior Upholstery: Leather Bjdpfx Akoy Thr Ijtslp Condition Technical Condition: very good Optical Condition: very good VOLVO FH 16 750 6X2 VDL CONTAINER TIPPER EURO 6 L PACKAGE 750 HP DRIVE 6X2 WHEELBASE 520 CM AIR SUSPENSION DIFFERENTIAL LOCK I-SHIFT AUTOMATIC VOLVO ENGINE BRAKE PLUS SLEEPER CAB WITH AIR CONDITIONING DRIVE ALERT CONTROL (COLLISION WARNING) LANE KEEPING ASSIST SIDE VIEW CAMERA AUXILIARY HEATER 27MC, MEDIA, TOOLBOX TRAILER COUPLING VDL S-26-6600 HOOKLIFT SYSTEM HYDRAULIC CONTAINER LOCKING HOOK HEIGHT 145 CM

Condition: excellent (used), mileage: 6,95,160 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, number of seats: 2, Structure Construction year: 2008 = More information = General information Year of construction: 2008 Cab: single Registration number: 2EBR229 Technical information Number of cylinders: 6 Front axle: Steering Rear axle: Double wheels Weights Empty weight: 14.880 kg Blodpoy Rfu Ujfx Aktsp Carrying capacity: 4.120 kg GVW: 19.000 kg Functional Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2005, 380 USED Miwe Athlet loading and unloading system. TECHNICAL DATA: - year of production: 2005 EQUIPMENT: - 4 trolleys with belts for proofing and loading bread The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Bodpfoy S Da Eex Aktslp Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) Bsdpsyiy Hbefx Aktjlp We would be happy to answer any further questions you may have by telephone.