Used Spaner Line for sale (10,393)

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Excellent, high-quality twin-screw compounding line. Fully equipped and suitable for the production of food, bio-based, and synthetic polymer compounds. Two side feeders with weighing scales, Siemens control PLC system. Output: 250-350 kg/h, depending on the raw material. Main motor: 90 kW. PLA, PHA, PP, PET, PA, ABS, and all other polymers. The equipment is in very good condition and has been used very little. Fgedpezzni Hsfx Aptog

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Fedpfxov Awgue Aptogg Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply Fjdezzyd Ajpfx Aptjgg * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW Fsdpfxszzyd Ne Aptogg * 32 universal joints

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fgedpfxjzt H Rao Aptjg Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log cutting line: 1) WRAVOR band saw, type WRC-1250 Fedpfjzwf Ncsx Aptjgg 2) Circular saw for edging and ripping with 3 movable and one fixed blade, PLC controlled, type WRAVOR 20/120 3X 3) Wravor conveyors for extracting lumber at the band saw outlet, transferring to the edger, feeding into the edger, and a conveyor with left-right discharge at the edger outlet, plus a log loading ramp for the band saw The equipment can also be sold separately (either the band saw or the edger). For sale: complete WRAVOR log cutting line, type WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and ripping with 3 adjustable and one fixed blade, type WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edger, edger feed conveyors, conveyor with left-right discharge at the edger outlet) Price for the entire line: 158,000 euros + VAT. The equipment can also be sold separately; for more details, please call:

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Fgedpjzxnyyjfx Aptog Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: used, machine/vehicle number: 007901, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 3: Batch 1 edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Fedpfx Aszwmbaoptegg Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 5: introducer FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 6: Single Edgebanders FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE Position 7: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOORFLEX U-LINE

Condition: good (used), Planer line lumber lift machine feed delivery table stacker various types of cutters sharpening machines Fgsdpfx Aszz Ik Dsptog

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. Fgsdsttlfkspfx Apteg ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,580 h, punching force: 41 t, sheet thickness (max.): 2 mm, CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details. • Application: Serial production of flat sheet metal parts (panels, brackets, enclosures, electrical cabinet parts, etc.) requiring holes, cut-outs, and notches • Process flow: Coil → uncoiling → straightening → positioning → TT punching → HT punching → part cutting → discharge/stacking • Technical specifications: • Sheet width: 60–830 mm • Sheet thickness: 0.5–2.0 mm (version available for up to 4.0 mm) • Maximum coil weight: 5,000 kg • Installed power: 20 kW • Power supply: 3 x 400 V + PE • Frequency: 50 Hz • Punching system: • TT (Thick Turret): CNC punching with standard cassette-type tools for flexible holes/cut-outs/contours • HT (Hard Tool): Second punching section using dedicated tooling for repetitive operations • Space requirements: Fgedpfxozynlxj Aptsg • Main line footprint: 17.5 x 5.5 m • Additional space for scrap: 1.5 m • Additional space for HT section: 1.55 m • Machine condition: Fully operational and in production; inspection and trial possible Additional equipment • Included: • Coil positioning carts • Coil uncoiler • Sheet straightener • Control panel for uncoiling/straightening unit and coil carts • Main control panel • Tilting conveyor for selectable product discharge • Transport and stacking module • Safety system with fixed guards and photoelectric barriers • Control cabinet with hydraulic power unit • Tool cassette carts • Hard Tool transport and storage station • Not included: • Punching tools • Tool cassettes • Robot shown in some photos

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Fedpev I S D Ssfx Aptegg Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), ABE CraftCan35 canning line for 330 and 440ml aluminium cans, with 5 fill heads, and the rinser/blower addition, and the modified inlet conveyor to accommodate a date coder print head. Upgrade of much of the tubing to standard metric versions (6mm) vs the default 1/4 fittings the line was built with. Walk round video available. Fedpsyq Ezyofx Aptogg

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately Fedpjynrzbjfx Aptjgg

Condition: used, Year of construction: 2009, Colour: White Fgjdpfx Apswnh I Eoteg - Details: - └ Description: Exclusive Makor - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: Fgsdpfszzp Ttox Aptsg - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2011, Koenig Eco Twin bun line - Model 9000/800 - Used - Year of manufacture: 2011 - Rex Classic divider - 6-row divider with reduction to 5 and 4 rows - Side conveyor belt for collecting the dough pieces - Computer control - 3 heads - Weight range: 30-100 g Fgedpfxszzk Dto Aptog - Maximum output: 9,000 pieces/hour - Good technical condition - Collection from warehouse / transport option available - Price on request

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,600 h, functionality: fully functional, machine/vehicle number: 15243485, type of input current: three-phase, total width: 3,600 mm, total length: 39,700 mm, total height: 1,900 mm, input voltage: 380 V, overall weight: 19,700 kg, The line consists of double decoiler, pre-heating section, set of forming rollers, foaming machine, polymerization bench, cutting system with flying saw, belt conveyor, stacking bench with return and a control panel. The line is equipped with a COMBI system allowing quick profile type changeover. Fgjdozwb D Nepfx Apteg The line produces two profiles: 1. H39mm, coil width 120mm, thickness 0.2-0.25mm 2. H45mm, coil width 136mm, thickness 0.2-0.25mm Technical Specifications: - maximum line speed - 36 m/min - maximum profile length - 6.5 m - maximum coil weight - 500 kg - the line power consumption approx. 36-40 kW IMPORTANT: the line currently produces only non-perforated profiles. However, perforated module can be integrated into the line for extra cost

Condition: used, Molding line for filled products such as cordon bleu (fresh weight 100gr) Fgjdpfx Apjzzkz Ejtjg The fresh weight per portion is ± 100 grams. The main components are 48 grams of ground meat 10 grams of processed cheese 10 grams of sausage or ham the rest is breadcrumbs consisting of: “Risco Brevetti” vacuum filler Type RS303 (filler-grinder) with loader for Eurobins with meat grinder heat (Filler-Grinder), Type RS 70 BJ 2010 filler-grinder opening 2 filling strips on top of each other of 90 x 5 mm + MasterSlice “Marel - Stork” Type 1511 Slicer for sausage or ham bars caliber 50 mm + “Karl Schnell” vacuum filler Type 596 P 10 SE Used to fill the processed cheese linked to the Masterfill + “Marel” MasterFill Type MTFU Takes the processed cheese from the Karl schnell vacuum filler and portion it + “Marel” MasterFormer Type TA1521 Using virtually no pressure, the MasterFormer system produces high quality filled and unfilled products with a handmade look and retention of structure and texture of meat mass. The MasterSlice and MasterFill modules allow solid, liquid and paste fillings to be added to the meat mass in the MasterFormer supply line. The MasterFormer offers a wide variety of end product possibilities with minimal waste of ingredients and maximum flexibility, including cordon bleu or steak haché. Features : · Ultra low-pressure forming, to retain structure and texture of meat mass · Fully automatic production of filled and unfilled products, with a handmade look · MasterSlice adds cut-to-measure slices of solid filling to the basic raw material · MasterFill is used to add liquid or paste fillings · Minimal waste of ingredients · End products can be packed directly onto trays or, alternatively, are ready for further processing · Easy to operate and clean in good condition in good working order The machine is fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: excellent (used), functionality: fully functional, We offer this very good FACADE PANEL ROLL FORMING machine. Input: 420mm output: 310mm Fedpfxjzyclmj Aptegg Decoiler, 16 stations, automatic cutting.

Condition: excellent (used), sinus profile 15/75 input : 1000mm only output: 830 mm Fsdpfxozyytuj Aptjgg work automatically, with cutting scissors.

Year of construction: 2021, condition: ready for operation (used), Hello, I would like to offer a production line for concrete garages. Year of manufacture: 2021 The line includes: - hydraulic vibrating formwork with core - vibrating table - rebar placement station - concrete hopper Interested parties are welcome to contact me. Fgedpfx Apozx Sqceteg

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 Fgodpfxozzwmhs Aptjg 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Fgedpezwu Uuefx Aptog

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical Specification Travel distances X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of Z-axis slide: 360 x 360 mm Portal clearance: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross-section of the slide: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Infinitely variable feed rate in X, Y, and Z: 10,000 mm/min Thrust force per axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° indexing, with spindle SK50 Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system - 1 pallet shuttle with 2 storage stations - 1 manual pallet transfer system between machine and shuttle - 2 workpiece carrier pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Pitch between chain pockets: 130 mm Diameter of consecutive tools: 125 mm Max. tool diameter: 200 mm Max. tool length: 400 mm Max. tool weight: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling systems: - Cooling via adjustable nozzles - ICS / coolant through spindle center, 3,000 l tank, Capacity: 30 l/min, pressure: 7 bar at the tool 2 x chip conveyors Portal enclosure Touch probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnostics Tool management and wear monitoring Documentation: 2 copies (German / French) CE marking Fgodpfx Apjtix S Nsteg Very well maintained, continuously serviced condition!