Used Spindle Hours for sale (24,087)

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 8.25 kW (11.22 HP), spindle diameter: 30 mm, total length: 2,400 mm, total width: 950 mm, overall weight: 1,200 kg, Equipment: documentation/manual, Table milling machine PANHANS with pivoting spindle, D=30mm and D=40mm; pivoting and height adjustment are electric. Table extension to the left and right, extendable table support. Fgodpfjzrnlcox Adref

Condition: ready for operation (used), functionality: fully functional, power: 17 kW (23.11 HP), gearing type: hydrostat, fuel type: diesel, color: original, empty load weight: 1,261 kg, maximum load weight: 1,500 kg, Year of construction: 2016, operating hours: 2,653 h, Equipment: all wheel drive, We offer a wheel dumper, brand Wacker Neuson, model 1501, with hydrostatic drive, imported from Austria. Original registration certificate (TP) is available. Registration number: 313/26. Fsdpfxezp I Edo Adrjgf Technical data: Engine: Yanmar diesel engine, 17 kW Operating hours: 2,653 km Year of manufacture: 2016 Weight: 1.261 t Payload: 1.5 t Total weight approx.: 2.836 t Equipment: Grammer air-suspension seat, lighting, turn signals, protective frame, fuel gauge. Transport dimensions: Length: 3.3 m Width: 1.3 m Height: 2.2 m Weight: 1.261 t The price is exclusive of VAT. Loading and transport to the destination are possible upon agreement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: lighting, pallet forks, sideshift, New price: 13,900 EUR // Old price: 18,900 EUR Mitsubishi IS IN VERY GOOD CONDITION We sell forklifts after a full service. Prepared for the end-user. Fgedpfxezn Uzio Adrjf We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklift industry in Poland, and we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and perform a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready for operation. In Poland, upon the customer's request, we can arrange for the equipment to be inspected and approved by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve their logistical problems. We know how to properly prepare the machine and ensure the customer is satisfied and recommends us to other customers. We invite you to contact us and make use of our services. Do you need a forklift supplier? Contact us.

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. Fgodpfx Adouqb Emorjf The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: used, Hofmann under-table milling machine Spindle adjustable up-down and tilted electrically 40mm diameter replaceable spindle Spindle speed adjustable via frequency inverter Fodpfx Ajzp D Smjdrjgf 7.5 kW motor Left-right rotation Spindle lock Brake The milling machine is in working order and ready for use.

Condition: used, functionality: unexamined, Ferwood Code: RU0005199 - Manufacturer Code: 4-075-03-0280 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Fodpfjzmibujx Adrsgf

Condition: used, functionality: unexamined, Ferwood Code: AGG0215 - Manufacturer Code: 2-017-95-5550 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a reconditioning service; please contact us. Fjdpfx Ajzmht Asdregf

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Fodpfx Ajzlqavsdrjgf

Condition: good (used), Year of construction: 2015, operating hours: 6,105 h, load capacity: 2,000 kg, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D-01 Duplo 315 Sideshift, 6105 hours, VW Diesel, 2015, inspection valid until 7-2027. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 Fgjdpfjzr Ei Eex Adrof 5391 LR Nuland

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm Fedpfx Asdcmdlsdrsgf 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: new, Year of construction: 2024, Special offer price: €42,500 (instead of €48,500), excluding VAT. Available immediately! Included premium features: - Heidenhain ND5023 3-axis position display - 5-position longitudinal stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse gears - Air supply to the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction-hardened and ground - Headstock with induction-hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free sliding of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chip guard with microswitch, turret plexiglass guard, rear guard along the entire machine length, protection of lead screw and feed rods, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Traveling and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Fgodpfepq R Rdex Adrof Technical data - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: used, Antike Stockpresse / Antique Spindle Press Chn. Mansfeld Serial-No. 14101 Pressfläche / Press Area max. 550 x 480mm Fjdpfewq Stqsx Adrsgf Presshöhe / Press high max. 660mm Wunderschön verarbeitete antike Stockpresse  Beautifully crafted antique Spindle Press Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 Serial-No. 60654 Seitenanschlag  Side stop for fine adjustment Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Fgsdpoxu T Alofx Adrjf

Condition: used, Year of construction: 1998, machine/vehicle number: 18109, 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citoborma 280bYear 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fodpeh Axrksfx Adrsgf

Condition: used, machine/vehicle number: 220803, Spindelpresse - Spindle Press Krause SPPressfläche / Pressing Size max. 550 x 750mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fgjdeh Ayg Ropfx Adrjf On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1984, machine/vehicle number: 106, 4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Fgjdpfx Adsh Axaderjf Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19170, 4-Spindle Paper Drilling Machine Ideal 504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fedpfx Adjh Axygerjgf On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 209, Spindelpresse / Spindle Press Tränklein SP Serial-No. 209 Pressfläche / Press area max. 300 x 400mm Fsdpsupy Tgefx Adrogf Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13247, Spindelpresse - Spindle Press KrausePress area max. 250 x 280mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fgodpfxeh Axnns Adref

Condition: used, Year of construction: 2001, machine/vehicle number: 700643, 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280BBaujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fgodeh Axx Hopfx Adref

Condition: used, machine/vehicle number: 13164, 1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150Serial-No. 7404 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fgsdjh Aw Ugopfx Adrof On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13270, 1-Head paper drilling Nagel CitibormaYear - Serial-No. S129 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fgsdpfjh Aw Ukex Adref

Condition: used, machine/vehicle number: 71789, 2-Spindel-Papierbohrmaschine / 2-head spindle paper drilling Hang 136DSerial-No. 71789 Seitenanschlag Side stop for fine adjustment Fgsdpfxormulys Adrof Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Bohrdurchmesser / Drill diameter 2 – 14 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1987, Equipment: Fodpfx Aey S Syajdregf  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Condition: good, little use

Condition: used, Used machine Fodpfszlbqxjx Adrsgf Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of the table opening: 480/380/170/125 mm - Taper of the milling spindle: MK 5 - Speed of the milling spindle: 3000 rpm - Height adjustment range of the milling spindle: 150 mm - Distance from milling spindle centre to front table edge: 400 mm - Largest permissible tool diameter: 250 mm - with wooden stop jaws (can be exchanged for metal stop jaws on request) - with Holz-Her 3-roller feed unit - with heavy sliding table; runs on ball bearings on absolutely parallel-milled guideways - Weight: approx. 800 kg Availability: at short notice Location: 63934 Röllbach