Used Spindle Hours for sale (24,298)

Condition: used, Year of construction: 2015, Worktable: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. tool diameter (lowerable): 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction diameter: 2x 120 mm Storage location: Supplier Dcodjxn Al Njpfx Addsr

Condition: used, Year of construction: 1994, turning diameter over cross slide: 200 mm, turning diameter over bed slide: 410 mm, turning length: 950 mm, metric thread diameter (max.): 140 mm, bed width: 330 mm, overall weight: 2,100 kg, Voest Lathe Model: E 35 / S3 For chuck and shaft machining, equipped with variable drives and cycle automation Spindle nose: DIN 55027/6 Spindle diameter at front bearing: 90 mm Operating voltage: 380 V / 50 Hz Chip guard wall with comprehensive, movable splash guard hood Chuck guard with safety interlock end switch Machine light Multifix quick-change toolpost, size B Coolant system Operating key(s) Tailstock taper: MT 4 Spindle bore: 54 mm Main spindle internal taper: MT 6 Metric threads: 0.5 – 140 mm Inch threads: 1/4 – 56 TPI / 1" Module threads: 0.125 – 28 DP threads: 1 – 224 Number of thread leads: max. 50 AC drive with 2-speed gearbox Motor power S1/S6: 9.0 / 7.5 kW Total speed range (2 steps): 1 – 3000 rpm Dcsdpfx Asx Aqrasdder Max. spindle torque: 700 Nm Three-phase servo drive Longitudinal feed force: 6.0 kN Cross feed force: 3.0 kN Feed range longitudinal/cross: 0 – 10 mm/rev Rapid traverse longitudinal/cross: 7 / 3.5 m/min

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Dcodpfx Aoxp Skdeddjr Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Dodpfxexzu Ips Addscr

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Dedpsxyik Asfx Addecr Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Dodpfx Aeu Uh U Ioddecr

Year of construction: 1999, condition: ready for operation (used), A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible. Dcodpfox Aup Njx Addsr

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Control: Siemens 828 D General Speed: 3,000 rpm Power: 9 kW Torque: 140 Nm Chuck diameter: 210 mm (max. 260 mm) Spindle bore: 65 mm Spindle nose: A2-6'' Djdpfxsx Ahdte Addocr Working area Distance between centers: 1,000 mm Center height: 215 mm Swing over bed: 430 mm Swing over slide: 200 mm Travel Z-axis: 1,065 mm Travel X-axis: 220 mm Tooling system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: dragged Centre point: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 5 bar Jaw set: 1 set of hardened jaws

Condition: good (used), Year of construction: 2009, operating hours: 647 h, load capacity: 1,500 kg, lifting height: 3,800 mm, fuel type: electric, mast type: duplex, construction height: 2,330 mm, empty load weight: 1,531 kg, mileage: 647 km, This HYSTER electric stacker from 2009 is in good condition; The capacity is 1,500 kg; The stacker lifts up to a height of 3,400 mm; Drive-through height is 2,330 mm; ONLY 647 hours on the clock; Equipped with a 24-volt maintenance-free GEL battery from 2019 and an external charger. Make an appointment for a test drive. Video to follow! Dedpexnddgefx Addocr

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical specifications: Dcjdpfsxwz Rcjx Addjr - Spindle clamping length: 180 mm - Spindle tilt: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilt - Motor: 5.5 kW - Table size: 1200 x 730 mm - Largest table opening: 420 mm - Motor brake - Speeds: 3000/4500/6000/7000/10000 rpm - Speed display - Extraction port: 125 mm - With Aigner integral fence - With 3-roller power feed Availability: approx. mid/end of January 2026 Location: Hesse

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Dcedpfx Asw I A Uxoddor Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Leadscrew & feed rod lathe WEILER CONDOR - Original paint - Centre height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 170 mm - Distance between centres: 800 mm - Spindle speeds: 24 - 2800 rpm - Automatic longitudinal/cross feeds - Spindle bore: 38 mm - Tailstock MT 3 - Collet chuck system + 17x collets - Three-jaw chuck Dodpfxex A D Ubs Addocr - Multifix toolpost with inserts - Electric chuck guard - Chip guard rear panel - Work lamp - Various accessories - Documentation Dimensions: LxWxH 1.8x0.9x1.6 m / Weight 800 kg Errors and omissions excepted.

Condition: used, Year of construction: 2019, operating hours: 340 h, Please contact ATS Norway for more information Please provide reference number upon request: 21806 Specifications: Delivered certified Model year: 2019 Hours: 340 Boom length: 30.7 metres Hook height: 29.8 metres Lifting capacity: 1500 kg 1 extension Crane diagram Remote control Description:Klaas trailer crane with a hook height of 30 metres.It has only 340 operating hours and will be delivered certified.Can be delivered at short notice. Djdsxw Nlhspfx Addjcr Hours: 340 Own weight: 1 Model: K21-30 Byggekran. 340 timer!

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Djdpfxjxt I Ads Addecr Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2013, operating hours: 8,500 h, stroke length: 445 mm, number of axes: 6, Number of axes: 6 Pressing force: 3,200 kN Dcedpowxwwdofx Addor Max. machining length: approx. 440 cm Weight: 22,800 kg Max. load capacity: 150 kg Runway length: 12 meters

Condition: excellent (used), SCM MiniMax Formula1 8/24 milling machine Technical specifications: Spindle diameter: 40 mm Spindle height: 140 mm RPM: 3000/4500/6000/7000/10000 r/min Manual spindle height adjustment Spindle lock Work table dimensions: 730x1860 mm Dimensions of working table with carriage: 760x600 mm Culagi arms adjustable Dcsdpfxsuyg Tcj Adder Power supply: 400 V Overall dimensions: Length: 3680 mm Width: 1200 mm Height: 1500 mm

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Dcjdpfxjw E D Rqs Addsr

Condition: excellent (used), power: 40 kW (54.38 HP), fuel type: diesel, color: yellow, first registration: 05/2008, Year of construction: 2008, operating hours: 4,966 h, CATO308CCKCX02306 = Further information = Purpose: Construction Drive: Crawler Technical condition: very good Visual condition: very good Contact Sales for further information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be transferred to our bank account underneath. Always check the payment details that are stated on our website. In case you have received other information, please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO Dedpeutc Hqefx Addecr EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Dcjdsxz Edzjpfx Adder

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Dedpfx Adoxzgkisdocr Coolant System

Condition: good (used), power: 376 kW (511.22 HP), fuel type: diesel, color: yellow, axle configuration: 6x6, Year of construction: 2015, operating hours: 5,971 h, Equipment: air conditioning, all wheel drive, Technical information AdBlue system: Yes Make of engine: C18 ACERT Top speed: 55 km/h Functional Cargo space capacity: 26.500 l CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0745CKTFK00655 Other information Max. working load: 41000 kg Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 33,4 Production country: UK Dcodpfxoxxzyae Adder Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Dsdpsx Afvgefx Addecr

Condition: used, Year of construction: 2008, operating hours: 1,010 h, machine/vehicle number: GS6808-5xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 19737 Specifications: - 2008 model Djdpfsv U S I Rex Addjcr - Hours: 1010 - 4x4 - Max lifting height: 9.8 m - Support legs - Good tires - Ready for delivery Hours: 1010

Condition: excellent (used), power: 117 kW (159.08 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 789 h, Equipment: air conditioning, Technical information Track width: 56 cm Empty weight: 13.271 kg Dodpfx Adoxxzw Esdocr Drivetrain AdBlue system: Yes Drive: Track Make of engine: C4.4 Condition Technical condition: very good Visual appearance: very good Identification Serial number: CAT00D6KPDFR00446 Other information EPA Marked: yes Front tyres / undercarriage remaining: 98 Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5x2,896x2,965 Production country: FR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), power: 82 kW (111.49 HP), fuel type: diesel, color: yellow, Year of construction: 2016, operating hours: 3,240 h, Equipment: air conditioning, Technical information Track width: 51 cm Drive: Track Make of engine: C4.4 Empty weight: 9.314 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CATD5KCKW202172 Other information Front tyres / undercarriage remaining: 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Transport dimensions (LxWxH): 4,309x2,11x2,722 Production country: US Dcodpfsxxzwxjx Adder Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information