Used Spindle Hours for sale (24,297)

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.4450mm Width/depth (product): approx.1150mm Height (product): approx.1650mm Weight (net): approx.3000kg Working ranges: Center height: 280mm Center width: 2910mm Circumferential diameter over machine bed: 560mm Circumferential diameter in the bed bridge: 790mm Swing diameter over cross slide: 355mm Turning length in the bed bridge: 170mm Bed width: 350mm Speed range: Number of speed ranges: 12 Speed range: 25 - 1600min¯¹ Electrical data: Drive motor power: 7.5kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar passage diameter: 80mm Steel holder mounting height: max.25mm Spindle cone: MK 7 Tailstock: Tailstock holder: MK 5 Tailstock quill stroke: 180mm Crjdpfxsq Ukc Ro Addok Tailstock quill diameter: 75mm Pitch: Pitch metric: 0.2 - 14mm/rev Number of leads metric: 47 Pitch inch: 112 - 2Gg/1" Number of pitches inch: 60 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches: 34 Travel distance: Top slide travel: 130mm Travel of face slide: 316mm Bed slide travel: 2710mm Feed rate: Feed range longitudinal: 0.059 - 1.646mm/rev Number of longitudinal feeds: 35 Feed range flat: 0.020 - 0.573mm/rev Number of feeds flat: 35 Electrical connection: Total connected load: 8.5kW

Condition: ready for operation (used), functionality: fully functional, Centre distance: 750 mm Swing over bed: 430 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Weight approx.: 2 t Accessories: steadies, Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. The machine is low-priced and only suitable for simple tasks. Csdpfx Asx Dm Sxjddsrk

Condition: excellent (used), Year of construction: 2005, operating hours: 48,242 h, functionality: fully functional, machine/vehicle number: M253595-3634, This Harrison M250 lathe, serial number M253595-3634, is in fully functional condition. It comes with 3-jaw and 4-jaw chucks, coolant, work light, and a complete set of change gears for cutting metric threads. The machine has been used very little throughout its life, and the bed and carriage are in particularly good condition. It can be demonstrated using a phase converter, but I am not prepared to operate the machine with this device. Crodjx Akc Espfx Addjk

Condition: used, functionality: fully functional, total length: 15,000 mm, total width: 5,000 mm, total height: 3,300 mm, Equipment: documentation/manual, Lathe - Turning lathe 708 mm Ø. Location: Ospitaletto. Price negotiable. Center height: 3 m usable. Cjdpfxsxtalqo Addork

Condition: good (used), Year of construction: 1993, Swing diameter over bed: 1000 mm Spindle bore: 128 mm Turning length: 5000 mm Total power requirement: 22 kW Machine weight approx.: 16 t Crodpfx Adjx A Eg Esdsk Space requirement approx.: 7.8 x 2.3 x 1.8 m

Condition: good (used), Year of construction: 1999, TOS SU 150 Variant CNC Lathe TOS SU 1500 Variant with Heidenhain Control, year of manufacture 1999, in excellent original condition The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant! Technical Details: Year of manufacture: 2004 Working Range Swing diameter over bed: 1500 mm Swing diameter over support: 1190 mm Swing diameter over extended slide with T-slots: 1100 mm Swing diameter over right-angle hardened guide with T-slots: 1020 mm Distance between centers: 2000 mm Max. workpiece weight (without/with support): 6000/8000 kg Spindle size: 11 DIN 55027; bayonet Spindle bore: 128 mm Speed range: 4 - 630 rpm Main drive power: 37 kW Max. spindle torque: 12,000 Nm Tailstock Quill diameter: 165 mm Internal taper: 100 (1:20) mm Reduction sleeve: 100 (MK6) Total power consumption: 67 kVA Weight: 9,400 kg The universal spindle lathe SU 1500 Variant is a numerically controlled machine designed for roughing and finishing of shaft and flange parts, as well as for threading, drilling, taper turning, and machining of various rotationally symmetrical surfaces. The machine is built with a rigid horizontal bed, the guideways are hardened and ground, and the counter surfaces on the longitudinal slides are coated with Turcite B sliding material. The SU 1500 Variant lathe is a machine with automatic cycle control, equipped with a Heidenhain control system. The feed drive for the longitudinal axis (Z-axis) is provided by a servo drive directly to the ball screw. The cross-feed drive (X-axis) is also provided by a servo drive directly to the ball screw. Both feeds are measured by rotary encoders mounted on the servo motors. The machine can be operated either manually or in controlled (automatic) mode. About the machine: Offered here is a CNC lathe TOS SU 1500 Variant with Heidenhain control, year of manufacture 1999. This lathe is in very good original condition. Coming from a shop where it was only used occasionally for special builds. The control system is very user-friendly. The ways are regularly lubricated by the central lubrication system. The TOS SU 1500 Variant has been mechanically and electrically inspected by us. Take the opportunity to view and test the TOS SU 1500 Variant under power at our premises. You will find further lathes from reputable manufacturers on our website. Cjdpfx Adsx Dy I Tsdork

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Csdpfx Adoq Ukbpsderk Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: excellent (used), Year of construction: 2007, operating hours: 1,100 h, machine/vehicle number: 30438, This robot has extremely few hours and is in very good condition. He didn't work as a welding robot, but instead fed pic and place metal plates of around 300 grams to a machine. The maintenance was carried out regularly by Fanuc. The machine has been thoroughly checked and has passed an endurance test. Welding software is installed. Crsdpei Dtnyefx Addok The robot can be inspected under voltage.

Condition: like new (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,662 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, gearing type: automatic, fork length: 1,800 mm, tire condition: 70 %, front tire size: 300x15, rear tire size: 7,00-12, overall weight: 8,180 kg, empty load weight: 5,000 kg, total height: 2,500 mm, total length: 3,400 mm, total width: 1,650 mm, maximum load weight: 5,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, front guard, head guard, lighting, pallet forks, sideshift, Hyster is like new. Original only 3662 hours. Forkpositioner + sideshift We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English between 9.00 and 21.00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp in French language from 9:00 to 21:00. ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. Crodpfjxy Rbvjx Addek In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) Csdpfx Aswugczsddjrk 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Year of construction: 1992, Swing diameter over bed: 1000 mm Spindle diameter: 128 mm Turning length: 8000 mm Total power requirement: 22 kW Machine weight approx.: 20 t Credpfx Adox A Egfedjk

Condition: excellent (used), Year of construction: 2020, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions With Aigner integral fence and 3-roller power feed - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle assembly mounted on the table Especially sturdy design Smooth operation thanks to precision components and high dead weight Standard right/left spindle rotation with electronic lockout when changing direction 5 speeds from 3000 to 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron table for lasting precision Easy operation thanks to controls and speed display on the front of the machine Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Credpfsxac Eysx Addok Equipment details: Moulder fence Moulder fence adjustment with crank/wheel from the front With digital readout Quick-change spindle MK 4 quick-change spindle standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting work Scope of delivery: Manually tiltable spindle from +45° to -45° Speed indication via LED on the front Aluminium fence jaws Curved cutter guard Right/left rotation of the spindle MK 4 quick-change spindle Moulder fence with crank/wheel adjustment from the front with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item no. 5220728 Technical Data Working table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. profiling tool diameter: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1760mm Width/depth (product): approx.745mm Height (product): approx.1320mm Weight (net): approx.469kg Max. height (product): approx.1590 (DPA)mm Working ranges: Center height: 165mm Center width: 1000mm Rotation diameter over machine bed: 330mm Swing diameter over cross slide: 216mm Bed width: 190mm Speed range: Number of speed ranges: 9 steps Speed range: 65 - 2000min¯¹ Electrical data: Drive motor power: 1.5kW Supply voltage: 400V Mains frequency: 50Hz Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: Diameter 38mm Steel holder max. mounting height: 16mm Spindle cone: MK 5 Tailstock: Tailstock holder:MK 3 Tailstock quill stroke: 100mm Cedoq T R Aajpfx Addjrk Tailstock quill diameter: 38mm Pitch: Pitch metric: 0.4 - 10mm/rev Number of leads metric: 29 Pitch inch: 56 - 4Gg/1" Travel distance: Top slide travel: 90mm Travel of face slide: 168mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.02 - 0.4mm/rev Number of longitudinal feeds: 24 Feed range flat: 0.01 - 0.2mm/rev Number of feeds flat: 32

Year of construction: 2024, condition: used, General information Field of application: Freight transport Drivetrain Make of engine: Mitsubishi Functional Lifting capacity: 4 kg Csdpfx Adsxyqkkedork History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 2700 cm Remote control: Cable Latest inspection: 2025-02-03 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker HL 27 Agilo Furniture lift mounted on a Mitsubishi Fuso 3515 construction year 12-2024 (first in use 02-2025) with only 62 hours and 2.865 kilometers. The lift is like new and has a capacity of 400 kg and is equipped with a XXL basket, hydraulically operated support legs, remote control and a storage box. Changes and typographical errors reserved.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: lighting, pallet forks, sideshift, New price: €14,900 // Previous price: €18,900 Mitsubishi - IN VERY GOOD CONDITION We sell forklifts after complete servicing. Codpfoxyu Igjx Addork Prepared for immediate use by the end user. We can arrange transport throughout Europe and worldwide. ===== WhatsApp in English between 09:00 and 21:00. WhatsApp auf Deutsch zwischen 9:00 und 21:00 Uhr. WhatsApp en français entre 9h00 et 21h00. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. Our team consists of qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We employ the best mechanics in the forklift industry in Poland, and have many satisfied customers across Europe. We are also a manufacturer of EPAL EUR pallets, recognized for our excellent quality and on-time deliveries. Before delivery, we thoroughly test each truck and carry out a complete service inspection. All necessary repairs are performed, so the customer receives a forklift ready for immediate operation. In Poland, at the customer's request, we can facilitate acceptance of the equipment by the State Office of Technical Inspection (UDT). Our company’s main mission is customer satisfaction and solving logistical challenges. We know how to properly prepare the machines so that our clients are fully satisfied and eager to recommend us further. Contact us for further information and to take advantage of our services. Looking for a reliable forklift supplier? Contact us.

Condition: excellent (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Crjdpfx Adetrzuqsdok Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Mould Height min. [mm]: 200 Machine tested

Condition: ready for operation (used), Year of construction: 2025, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Crjdjxwzzuspfx Addsk Boring & Drilling (Wood)

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Cjdpfx Adehp Rcrjdsrk Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: new, Year of construction: 2024, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1935mm Cjdpfjq T R Dmjx Adderk Width/depth (product): approx.780mm Height (product): approx.1740mm Weight (net): approx.765kg Working ranges: Center height: 200mm Center width: 1000mm Rotation diameter over machine bed: 400mm Swing diameter over cross slide: 250mm Speed range: Number of speed ranges: 8 Speed range: 70 - 2000min¯¹ Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump power: 100W Spindle: Steel holder: SWH 3-E Spindle holder: Camlock DIN ISO 702-2 No.5 Spindle bore/bar passage diameter: 53mm Spindle cone: MK 6 Tailstock: Tailstock mount:MK 4 Tailstock quill stroke: 110mm Pitch: Pitch metric: 0.4 - 7mm/rev Number of leads metric: 32 Pitch inch: 56 - 4Gg/1" Number of pitches inch: 31 Travel distance: Top slide travel: 98mm Travel distance face carriage: 185mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.014 - 0.38mm/rev Number of longitudinal feeds: 26 Feed range flat: 0.052 - 1.392mm/rev Number of feeds flat: 32 Tool clamping: Tool holder Holder size: 16mm Electrical connection: Total connected load: 3.0kW

Condition: used, Year of construction: 2015, Worktable: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. tool diameter (lowerable): 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction diameter: 2x 120 mm Storage location: Supplier Cedpfx Adjxn Al Nodork

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support Crodpfx Asvutyheddek 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Condition: New machine Center height: 200 mm Center width: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with - 3-axis digital readout DPA 21 - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions Cjdpfx Aeq Ui Tdoddork

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Credpfjdqzh Rex Addok Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: good (used), Year of construction: 1975, functionality: fully functional, turning diameter over cross slide: 350 mm, spindle bore: 65 mm, turning diameter: 630 mm, turning diameter over bed slide: 350 mm, center height: 315 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 10 rpm, rotational speed (max.): 1,250 rpm, rotational speed (min.): 10 rpm, Lead screw and feed shaft lathe 1 M 63. The machine is in operational condition and includes accessories such as steadies (lunettes) and documentation. Credpfxex Aq Tqs Addek

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Credpfx Aor Hr D Nsddok Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -