Used Spray Dryer for sale (3,250)

Condition: used, Year of construction: 1991, Used machine Nsdpfx Aqsy R Ha Sovect Year of manufacture: 1991 Features and technical data: - Fully installed dryer with trolley, high-performance radial fan, electric heating - Supply and exhaust air dampers, safety thermostat, spray device - Lift-swing door for easy opening and closing of the dryer - Interior cladding: all side walls are made of sea-water resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood components such as tannic acid, etc. - The sealing of the connection joints is absolutely durable and also allows steaming in the unit - Stack dimensions: 530 x 105 x 115 cm - Stack volume: 6.4 m³ - External dimensions: 690 x 176 x 140 cm - Heating: 12 kW - Motor: 1.1 kW / 400 V - With MP 902 control Availability: short-term Location: 63934 Röllbach

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. Ncedpfxehby Rio Aqvst It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Ncedoy Ud T Ropfx Aqvet Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Year of construction: 2020, condition: new, Use of one photocell Nedpfefy T Arjx Aqvsct Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Njdpfx Aqofz U Hvjvect Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: excellent (used), Year of construction: 2011, PROD. KAESER TYPE DC108E S/N 9.5487.00010 1198 YEAR 2011 POWER (kW) CAPACITY (m3/min) 10.93 PRESSURE (bar) 5 / 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) Nedpfoy T Ng Tjx Aqvsct ON TANK DOCUMENTS CONNECTION 2 NEW/USED USED

Condition: excellent (used), Dryer tank 5,4m3 Nedpfx Asrtrv Seqvjct 3.50 m X 1.40 m

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The dryer is overhaulled , new dessicant , new set of valve , new dew point sensor. Ncodpfx Aqey R Szhsvjt

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, The dryer is overghaulled , new dessicant , new valves kit , new dewpoint sensor. Ncedpfx Aey R Szbjqvjt

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1002, Fully functional dessicant dryer Ncjdpfx Asy R Slgjqvjt

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Nedpfx Aqoy T Ibvevect Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system Njdpey R Rumefx Aqvsct SOMOS D200 Year of manufacture: 2010 10x hopper Including electrical wiring diagram and operating manual

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m Nodjyl Rr Hepfx Aqvoct - Flexible gantry design, allowing spray width to be easily and precisely adjusted - Siemens Simatic touch panel - Commissioning / installation support can be provided - Documentation available System is dismantled and ready for transport.

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES CONNECTION NEW/USED USED Ncedpfx Aqoy Twahevst

Condition: new, Cefla painting system Nodpfx Aqjwhbrwjvsct

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Current: 2,0 A Voltage: 230 V Frequency: 50 Hz Position: free standing Ncedew Tduwspfx Aqvet

Condition: used, Compressed Air Refrigeration Dryer, KAESER Type TA 5 Serial No. 2143, Item No. 1.7917.2, Year of manufacture 2002 Ncsdpfxsy Ra Dwj Aqvjt Throughput: 600 liters/min. Operating pressure: max. 16 bar Refrigerant: R134a Charge weight: 0.28 kg Compressed air connection thread: 3/4" Power consumption: 250 Watts Power supply: 230 Volts, 50 Hz, 2 Amps - Condensate drain: DN 6 mm Space requirement (L x W x H): 630 x 500 x 780 mm Weight: 70 kg In good condition

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device. Ncedpfx Aqexnptgjvot

Condition: new, machine/vehicle number: 1.127-001.0, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 139 kg, warranty duration: 24 months, water tank capacity: 50 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.127-001.0 Drive type: Battery Drive: Propulsion by brush rotation Ncodjxnyhnepfx Aqvot Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank (l): 50 / 50 Theoretical area performance (m²/h): 2040 Battery type: GEL - maintenance-free Charger power supply (V / Hz): 230 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 139 Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and features: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER V-shaped 900mm suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water stop after releasing the dead man's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Highly maneuverable and easy to use. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning tools can be carried. - Very good value for money.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Mühlböck QLSF2120 Technical data: Ncsdpsy Sxw Esfx Aqvot Year of construction: 2007 Heating capacity: 190 kW Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW

Condition: used, Year of construction: 2012, functionality: fully functional, Adelco Jetforce Dryer 150 - Natural gas dryer - Belt width: 150 cm - Oven length: 300 cm - Cooling bridge after the oven Nedpfx Asx Nwineqvjct - Infeed belt: 200 cm - Outfeed belt: 150 cm The dryer is very efficient and reliable. We process output from two automatic MHM presses through it. Can be seen and tested daily in our production facility.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Njdpsy I Rpfjfx Aqvect Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used MTA DEIT165 refrigeration dryer 16.50 m3/min 16 bar Nsdpfxjy Nkl Ns Aqvoct Year of manufacture 2016

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm Ncsdpfoy Ragfsx Aqvjt - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: Nedpfx Aqoy N R Taevect The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)