Used Spring Making for sale (13,828)

Condition: used, axle configuration: 3 axles, first registration: 04/2002, Available in multiple units: 30 units of various makes and models, different years of manufacture. Prices start at €2,100. Dkjdpfx Apezfylbetet We have 20-foot containers, 3-axle and 2-axle models. 40-foot containers, different years of manufacture. 3 units with leaf spring suspension. Special price for purchasing all units together.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Djdpfet Tqy Ejx Aptskt Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: ready for operation (used), functionality: fully functional, The complete BRETINOV line organizes three key stages in the spring roll production process. It includes a wrapper softening unit, a filling dispenser, and a folding and rolling table. This ensures that each part performs a specific operation before passing the product to the next station. This configuration is suitable for Asian caterers, food processing workshops, and ready-meal manufacturers. It allows for the use of rice paper wrappers and various filling recipes. Furthermore, it improves the consistency of the dispensing, folding, and final presentation. Rice Paper Wrapper Softening First, the softening unit prepares the wrappers before dispensing. It applies water and then steam to soften each sheet. As a result, the wrapper becomes easier to fold without breaking. BRETINOV positions the steam production close to the wrapper to minimize heat loss. In addition, the system precisely regulates the water supply. This step remains essential, as a wrapper that is too dry may tear. Conversely, a wrapper that is too wet becomes difficult to handle. Consistent Filling Dispensing Next, the BRETINOV P007 dispenser places the filling onto the softened wrapper. The attached plate clearly identifies this module as a P007 dispenser, version 2, manufactured in 2024. The dispensing head uses a screw to move the mixture towards the outlet. This makes it easier to control the amount dispensed. Furthermore, BRETINOV designs this system to preserve the texture of the ingredients and minimize their crushing. Interchangeable nozzles can also adjust the shape of the dispensed filling according to the recipe. Folding and Rolling of Spring Rolls Dkedpfxjzpw Eto Aptst Finally, the folding table receives the filled wrapper. It helps the operator or mechanical system to fold the sides and then roll the spring roll. This step improves the shape of the product and reduces variations between pieces. BRETINOV also uses air blowing systems on its automatic modules. These prevent the wet wrapper from sticking during folding. Consequently, the line facilitates the production of consistent spring rolls before cooking, freezing, or packaging. A Better-Organized Production Process The three parts work in a continuous sequence. First, the softening unit softens the wrapper. Next, the dispenser places the filling. Finally, the folding table shapes the product. This organization reduces movement and repetitive gestures. Furthermore, it helps teams to better control the recipe and presentation. BRETINOV develops its lines to reduce manual operations and improve operator comfort. Technical Specifications: Manufacturer: BRETINOV Line composition: P002 softening unit, P007 version 2 dispenser, and P003 folding/rolling table P002 Softening Unit: 380 V power supply, 8 kW power, 30 L/h water consumption, automatic belt cleaning, 250 kg weight P007 Dispenser: 220 V power supply, 0.8 kW power, pneumatic power supply, 60 kg capacity, 105 kg weight, serial number S594, year 2024, CE marking P003 Folding/Rolling Table: 220 V power supply, pneumatic power supply, 100 kg weight Dimensions (L, W, H) in mm: 6600 x 1000 x 1900 EKJZH9EL

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Ramp Equipment: - Spare wheel - Robust steel body - Highly customizable Net price: €7,092.44 / Gross price: €8,440.00 Article number: GP3235401702.01 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 170 x 30 cm • External dimensions (L x W x H): 569 x 230 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Tare weight: 847 kg • Payload: 2,653 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/70R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal all-round construction machinery trailer - unique on the market • Every available option can be flexibly added or removed, allowing for needs-based customization for almost any application • Attachment option on all 4 corners for side panels, tarpaulin frames, side panel extensions, or front wall extensions • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, other ramps, attachments, etc. can be retrofitted at any time • Robust steel fenders with non-slip perforated profile • Reinforced screen-printed plywood floor, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal beam under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Very low chassis for a low approach angle • Lashing points at the bottom and top of the side panel (1000 dAN/kg), TÜV certified • Side panels color: black • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist system • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock, ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! Dedpfjzy Di Tjx Aptokt We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, Smooth exterior walls Dksdpfszy A T Rex Aptjt Equipment: -+2° C to +10° C -60mm insulated wall -Insulated floor Net price: €8,399.16 / Gross price: €9,995.00 Article number: HGK113271421.01 Technical data: • Brand: Humbaur • Model: HGK 132716-21 PF 60 Deluxe • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 263 x 147 x 197 cm • External dimensions (LxWxH): 413 x 205 x 260 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,300 kg • Tare weight: 790 kg • Payload: 510 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Sturdy V-drawbar, hot-dip galvanized • Continuous longitudinal beams • Insulated 65 mm floor panel with anti-slip coating • PurFerro, 60mm - Thermo-sandwich construction • Sandwich panels with a core of foamed polyurethane with a double-sided covering layer of galvanized and polyester powder-coated steel sheet • Side and front interior abrasion protection approx. 150 mm high made of aluminum sheet • Rear door with stainless steel hinges • Refrigerated room pressure lock on the rear door • Refrigeration unit mounted on the side wall at the top • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Completely encapsulated unit with "outdoor" housing • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost system for the evaporator • The control display can be locked and is thus protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230 Volt interior lighting • 4x swiveling telescopic supports • ALKO overrun device and parking brake • Automatic reversing system • Plastic fenders • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Fully aluminum body - Aerodynamic Polybug - Aluminum floor Net: €6,697.48 / Gross: €7,970.00 Article number: C50226311620.11 Technical data: • Brand: Debon • Model: Roadster C500 Alu • Vehicle type: Box trailer • Vehicle condition: New • First registration: no first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 313 x 167 x 201 cm • External dimensions (LxWxH): 445 x 215 x 237 cm • Loading height of the floor: 35 cm • Permissible total weight: 2,600 kg • Unladen weight: 625 kg • Payload: 1,975 kg • Chassis: Low loader (wheels beside the body) • Tires: 185/70R13 • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Aluminum side walls, double-walled and anodized • Aluminum floor, anodized • Fully polycarbonate roof and front in color • Continuous interior height: approx. 188 cm • Continuous interior width: approx. 160 cm • Rear ramp made of aluminum, lockable with optional lock • Rear ramp as flap/door system (can be used as a flap or door) • Tie-down eyes mounted on the floor • Interior light • Torsion-resistant chassis • Stable cross members, allowing for high point loads • PULLMAN V2 suspension, single-wheel suspension with longitudinal link, coil spring and shock absorber, lowered with a very low center of gravity and galvanized • 100 km/h with manufacturer's certificate • Reversing aid • Knott inertia coupling and parking brake • Stable V-drawbar • Plastic fenders • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Automatic support wheel in the center • Body: splash-proof, not waterproof. Special equipment included in the price: • Side door 125x60cm, front right, lockable _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Dkjdpfszy Ai Esx Aptjt 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated metal floor Features: - Shovel holder - 10x lashing eyes - Perforated metal floor Net: €6,336.13 / Gross: €7,539.99 Article number: DPT235371700.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 370 x 170 x 20 cm • External dimensions (L x W x H): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 776 kg • Payload: 2,724 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor inside, laterally • Screen-printed wood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal beams under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise Dkedpfxezy A U Uj Aptot • Very low chassis for a low approach angle • Excavator shovel holder • 10x lashing eyes on the side rail (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side rail • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection for the tail lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years - Errors, omissions and prior sale excepted -

Condition: used, machine/vehicle number: NP8FA99W3N0000318, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm Dodpfx Ajzyf Uqoptokt - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use Dkodpfxjwlxbdj Aptet * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale, and errors!

Condition: used, machine/vehicle number: NP8FA99W3N0000319, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable Dkodpezyf Tgjfx Aptst - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: D32L/7511, Offer Number: D32L/7511 Machinetype: spring coiling machine Make: WAFIOS Type: UFM8 Constr. year: 1959 wire diameter: 0,2-0,8 mm spring diameter: 20 mm Dksdpfewi S Rmex Aptet feeding length: 3910 mm output pieces/min: 220 Location: In our warehouse

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Sandwich Construction Equipment: - V-shaped drawbar - Manual hand pump - 10x tie-down points Net: €12,100.84 / Gross: €14,400.00 Article number: FKS235351621.01 Technical data: • Brand: Vezeko • Model: Husky FB K C • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 344 x 167 x 210 cm • External dimensions (LxWxH): 510 x 240 x 260 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Body made of very massive steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel twist-lock, lockable • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded • Loading area hydraulically lowerable • Mechanical safety lock of the pivot axle during driving • With foldable stainless steel loading ramp at the rear • Additional longitudinal struts continuously welded • Toolbox at the front • 10 tie-down points inside the V-shaped loading rail, rubber-coated, tensile force (750 DaN/kg) • License plate holder at the rear • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-shaped drawbar, REINFORCED • Reverse drive automatic • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Dksdpfxjzy Du No Aptot We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: good (used), mileage: 5,12,632 km, power: 375 kW (509.86 HP), first registration: 12/2011, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, total length: 9,000 mm, total width: 2,550 mm, total height: 3,480 mm, Year of construction: 2011, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Alloy wheels - Manual - PTO (power take-off) - Radio/cassette - Fabric = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 10,625 kg, Gross weight: 27,000 kg, Total fuel tank capacity: 330 liters, Trailer coupling, Kingpin diameter: 50 DIN, Fifth wheel: Fixed, Number of diff locks: 1, Alloy wheels, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine output: 375 kW (503 HP), Fuel: Diesel, Emission standard: Euro 5, Transmission type: I-Shift, Make: Volvo, Gears: 12, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Central locking, Seat arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: VOL, 12 gears, automatic Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: steerable; left tire tread: 10 mm; right tire tread: 11 mm; Suspension: leaf spring Axle 2: twin tires; left inner tread: 19 mm; left outer tread: 18 mm; right inner tread: 19 mm; right outer tread: 19 mm; Suspension: air suspension Axle 3: lift axle; steerable; left tread: 17 mm; right tread: 16 mm; Suspension: air suspension Weights Curb weight: 10,625 kg Payload: 16,375 kg Gross vehicle weight (GVW): 27,000 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-turning stock • Recognizable quality • Good prices • Fair business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates can be arranged quickly • Expert technical service • The assurance of 'recognizable quality' • And much more…. Dsdpjyvpn Ajfx Aptokt Please visit our website for special offers and our complete stock. Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rates quickly and send a request via our website. Ask directly about our European warranty package.

Condition: new, Cam-driven spring forming machineCam-driven spring forming machine Djdpfxemb Uurs Aptokt

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 35,000 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bystronic IG production line for glass units Dedpfx Apezxx Etetjkt Maximum size: L4200 x H2700 Minimum size: 180 x 350 mm (double, triple, and shaped glass) An automatic butyl extruder can be offered as an option. Contact us at 0032479588591 to arrange a visit.

Condition: new, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine has between 12 and 16 axes, below are the 12 basic axes: - wire feed - wire rotation - nozzle rotation - servo spinner - 8 independent slides (8 axes) Optional (up to 4 axes): - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for lifting the second (German-type) extension spring eyelet. Maximum feed speed: 54 m/min. Dedpfx Apjvbdq Rstjkt Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. If you have any further questions, please do not hesitate to contact us.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, motorcycle tilting stand Features: - Low loading platform - Full tailgate - Motorcycle tilting stand Net price: €2,768.91 / Gross price: €3,295.00 Article number: MOB113281600.01 Technical data: • Brand: Vezeko • Model: Motovan B • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 285 x 157 x 0 cm • External dimensions (LxWxH): 402 x 206 x 102 cm • Loading height of the floor: 45 cm • Permissible total weight: 1,300 kg • Unladen weight: 405 kg • Payload: 895 kg • Chassis: Low loader (wheels beside the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes Dedpfxezy Dkwo Aptjkt • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Perforated sheet metal floor - extremely robust • Perforated profile inside the loading platform for securing loads • 2x freely positionable motorcycle tilting stands • Very stable steel frame, welded • Frame completely hot-dip galvanized • Continuous, double-folding rear ramp • Low suspension with a shallow approach angle • 10x lashing points mounted on the frame • 4x loose lashing points for snapping into the loading platform • Very stable V-shaped drawbar, REINFORCED • Reversing automatic • ALKO overrun device and parking brake • ALKO coupling head • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Support wheel mounted in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshops for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap Equipment: - Steel sheet body - Steel lid - Side opener Net price: €1,840.34 / Gross price: €2,190.00 Article number: CRH175201110.01 Technical data: • Brand: Vezeko • Model: Craft • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (L x W x H): 206 x 110 x 100 cm • External dimensions (L x W x H): 326 x 156 x 155 cm • Loading height of the floor: 51 cm Dkodpfx Aezy Dgxeptot • Permissible total weight: 750 kg • Unladen weight: 215 kg • Payload: 535 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Stable drawbar, hot-dip galvanized • Very stable aluminum frame • Floor panel made of Finnish plywood • Side walls made of very thick steel sheet • Side-angled lid for improved access to tools or installed interior shelves • Lid with sealing profile, lockable • Tension locks for the lid • Maintenance-free rubber spring axle • Plastic mudguards • 13-pole connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: good (used), mileage: 1,89,910 km, power: 315 kW (428.28 HP), first registration: 03/2013, fuel type: diesel, fuel: diesel, color: grey, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Weights Unladen weight: 24,180 kg Payload: 7,820 kg gross vehicle weight (GVW): 32,000 kg Functionality Mast: Telescopic (4 sections) Mast length: 35.5 m Lifting capacity: 2,650 kg Superstructure make: MKG HMK T A2-A2 CE marking: Yes Condition Technical condition: Good Visual condition: Good EURO 5 L PACKAGE 430 HP DRIVE 8X4 BB WHEELBASE 510 CM LEAF SPRING SUSPENSION AXOR CAB WITH AIR CONDITIONING, NAVIGATION, CAMERA SYSTEM MANUAL TRANSMISSION MANY TOOLBOXES MKG HMK 350 TA2-A2 ASSEMBLY CRANE/ROOFER'S CRANE + JIB 4X HYDRAULIC EXTENSION + 3X MANUAL OIL COOLER FOR CRANE HYDRAULICS Dedpfx Ajyiui Djptjkt LARGE HYDRAULIC WINCH 2500 KG !!! 4 X OUTRIGGERS REMOTE CONTROL + UPPER OPERATION WORKING HEIGHT 35.5 METERS ALL HOOKS AND PULLEYS PRESENT FOLLOW US ON INSTAGRAM: GEURTSTRUCKS

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Dksdjw Naanopfx Aptst MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, axle configuration: 3 axles, first registration: 10/1996, total length: 11,200 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: parabolic leaf (spring), tire size: 385/65 R22.5, color: other, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = - Leaf springs = More information = Axle configuration Make axles: SMB Brakes: drum brakes Suspension: parabolic suspension Rear axle 1: Tyre size: 385/65 R22.5 Rear axle 2: Tyre size: 0 Rear axle 3: Tyre size: 0 Dksdpjzw Hkhofx Aptst Weights Empty weight: 5.910 kg Carrying capacity: 32.090 kg GVW: 38.000 kg Functional Tipper: Back

Condition: used, Video of the machine in operation available upon request. Here is the complete specification sheet based on the model: *ACIERA F5EP WORKING CAPACITIES:* - *Table: 800 x 300 mm* - 6 slots of 12 mm - *Travels: X 500 mm / Y 325 mm / Z 420 mm* - *Quill travel: 60 mm* - *Spindle / table distance: 365 mm* - *Spindle: ISO 40 - inclinable +- 90°* Dodpfxjzzpcbj Aptekt - *Speeds: 50 to 3400 rpm with continuously variable speed drive* - *Feeds: 10 to 600 mm/min in X/Y/Z* - *Rapid traverse: 1.5 m/min* - *Power: spindle motor 3 kW - Total 5 HP / 3.7 kW* - *Weight: 1600 Kg* - *Dimensions: 1200 x 1600 x 1800 mm*

Condition: good (used), Year of construction: 2011, Koenig Eco Twin bun line - Model 9000/800 - Used - Year of manufacture: 2011 - Rex Classic divider - 6-row divider with reduction to 5 and 4 rows - Side conveyor belt for collecting the dough pieces - Computer control - 3 heads - Weight range: 30-100 g Dedpozzk Dtsfx Aptokt - Maximum output: 9,000 pieces/hour - Good technical condition - Collection from warehouse / transport option available - Price on request

Condition: good (used), mileage: 1,53,323 km, power: 294 kW (399.73 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: electric window regulation, power mirror, - Brake booster - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Windshield - Power take-off (PTO) Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 Engine displacement: 10,518 cc GVW: 35,000 kg Body manufacturer: WIELAND B.V, BB.8200 TG Technical condition: good Optical condition: good Dksdpfx Apozxgl Ietot MAN TGS 35.400 BB 8x4 WIELAND BLOWVAC BIGBAG 8200 – DRY MATERIAL SUCTION/BLOWING SYSTEM First registration: 04.05.2009 Operating hours: 13,442 hrs Drive: 8x4 Suspension: Leaf spring Engine power: 400 hp For sale is this MAN TGS 35.400 BB 8x4, equipped with a professional Wieland dry material suction/blowing system, type BlowVac BigBag 8200. This heavy-duty industrial unit was specifically designed for the suction, collection, transport, blowing, and filling of dry materials and bulk goods. Thanks to the powerful vacuum system and extensive equipment, this vehicle is suitable for numerous industrial applications. CHASSIS / TRUCK * MAN TGS 35.400 BB * 8x4 drive * Engine power: 400 hp * Heavy-duty MAN chassis * Leaf spring suspension * Suitable for heavy industrial applications * First registration: 04.05.2009 WIELAND DRY MATERIAL SUCTION SYSTEM Manufacturer: Wieland Type: BlowVac BigBag 8200 Design: Industrial dry material suction/blowing system Equipment includes: * 3-vane rotary piston vacuum pump * Maximum vacuum / maximum suction power: 900 mbar * Total container volume: 10 m³ * Suitable for the suction of dry materials and bulk goods * Blowing system available * Filling system available * BigBag system * Controlled emptying and filling of the collected material possible SUCTION CONNECTORS * Suction connector Ø 200 / 150 mm * Dome lid with suction connector * Large maintenance opening * Good accessibility for cleaning and maintenance work FILTER CHAMBER The Wieland system has a separate filter chamber for processing dry and dusty materials. This makes the system particularly suitable for applications where larger quantities of dust, powder, sand and other dry materials need to be collected. OPERATION & EQUIPMENT * Remote control * Blowing system * Filling system * BigBag system * Storage area * Storage area with sideboards * Various connections for suction hoses * Maintenance opening to the filter chamber * 2 supports at the rear of the vehicle * Heavy-duty industrial design OPERATING HOURS 13,442 operating hours APPLICATION POSSIBILITIES This MAN/Wieland combination is suitable for, among others: * Industrial cleaning work * Suction of dry bulk goods * Sand and dry construction materials * Dust and powder * Cement-like materials * Production residues * Cleaning of silos and industrial plants * Factories and industrial plants * Construction and infrastructure projects * Filling into BigBags * Blowing out of the collected material DESCRIPTION A heavy-duty...

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips Dkodpfxsq Iivas Aptot - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips