Used Stackable for sale (154)

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP18 GEN2 system is built around the second-generation RP18 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP18 GEN2 press, max. 18.5 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP18 GEN2 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 18.5 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Gbedpfoz Rwimjx Ap Dsu Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2006, Lot of seven sturdy, used rack pallets, stackable. Dimensions approximately 320 x 120 x 120 cm (L x W x H), individual weight approximately 125 kg. Fitted with 12 mm vehicle construction board; the racks can be stored on the pallet, see photos. Gsdpfx Apez Dw Hke Djbu Payload 1.3 tons, stacking load 3.9 tons, year of manufacture 2006. Transport dimensions approximately 320 x 120 x 200 cm (L x W x H). Weight approximately 900 kg. Sold only as a complete package; the price is for all 7 pallets together.

Condition: good (used), Pallet stacking frame for Euro pallets Width: 865 mm Depth: 1270 mm Height: 1280 mm Suitable for Euro pallets: Gbodpfxjx Ih I Ee Ap Dju · Pallet dimensions: 800 x 1,200 mm (W x D) · For optimal use of the pallet surface · Quick assembly · Collapsible for space-saving storage · Surface: green · Stackable: up to 4 units · Load capacity: 300 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Stackable galvanized crate with front flap and lid 1000 x 800 x 500 This lockable metal storage crate with lid and half front flap is made from hot-dip galvanized steel (note: the lid is electrolytically galvanized, not hot-dip). This ensures a long service life as rust cannot affect the steel panels of the crate itself. The crate is equipped with four lifting eyes. Thanks to these lifting eyes, the lockable storage bin can easily be moved using a crane (note: this crate is not certified for lifting operations!). Additionally, these crates are very stackable and easy to move with a forklift truck. Specifications for storage crate with lid: Gbjdpfx Aew Nigqop Dou Capacity: 192 litres 4 lifting eyes (note: this crate is not certified for lifting operations!) Stackable Completely lockable Hot-dip galvanized crate body Electro-galvanized lid

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm Gbjdpfx Aez Df Txep Dju workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), We offer used R-KLT and C-KLT crates in larger quantities. Available models: KLT 3215 KLT 4329 Gsdpexziv Uofx Ap Dobu KLT 6280 KLT 4328 C-KLT 6428 Prices start from: €2.50 per unit for type 3215. This price applies only to full truckload orders. We do not ship individual items or small quantities. The crates are free from grease/oil contamination and are undamaged.

Condition: excellent (used), inner dimension width: 1,190 mm, inner dimension length: 990 mm, inner dimension height: 810 mm, We offer used KTP storage containers in various sizes: - KTP 777, 1230x830x950mm (price: €75) Gsdsxzic Ijpfx Ap Djbu - KTP 888, 1200x1000x990mm (price: €82) - KTP 999, 1600x1200x750mm (price: €82) These containers are foldable, equipped with a top lid, and stackable. The containers are used. Over 1,000 units available. Please inquire for the availability of a specific size. These containers are in good working condition. We also have these containers available in second-class condition with damage. Rental options are available. This price is valid only for full truckload orders. We do not ship individual items or small quantities. We speak Polish, German, and English.

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew Gbjdpfsz E U Dijx Ap Deu - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: new, Pallet racking frame for Euro pallets Width: 865 mm Gbodpfxsx Ih Hue Ap Deu Depth: 1270 mm Height: 1480 mm Suitable for Euro pallets: · Pallet dimensions: 800 x 1,200 mm (W x D) · For optimal use of the pallet surface · Quick assembly · Collapsible for space-saving storage · Surface: Light blue · Load capacity: 300 kg · Stacking height in storage: 4 levels More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2024, Pipe ramp / road ramp • Available in any desired width • Any desired flanges or couplings possible • Water flow up to 2500 m³ per hour • Height of flat section: 120 mm • High load capacity • 4 tubes for traffic trays Gbodpfx Asz Rxrvjp Dou • Driving surface made entirely of chequer plate • 4 lifting eyes with D-shackle • Stackable and lockable • Fully customizable to your requirements! Condition: New Year of manufacture: 2024

Condition: good (used), Year of construction: 2019, operating hours: 1,451 h, functionality: fully functional, machine/vehicle number: 19040, overall weight: 1,000 kg, Stiller STA 3000 from 2019 with few operating hours. Gbjdpfx Apjzlgqqo Dju The machine comes with change parts for 99/119mm, 73/110mm, and 73/58mm can sizes, meaning it can handle stackable 800g, 400g, and 200g cans. The machine runs perfectly; the cutting blade of the lid dispenser may need to be replaced occasionally.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, This is a pizza conveyor oven manufactured by Lincoln, model Counter Top CT 2512 - continuous belt, year of manufacture 2022. The oven has been professionally overhauled in our in-house workshop and is fully functional. The list price is: €8,998 net / €10,707.62 gross Our price: €4,159.66 net / €4,950 gross You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked and fully functional - or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 797 x 1269 x 457 mm Power connection: 400 V / kW: 6.1 / 50-60 Hz Exhaust air volume: 700 m³/h Temperature: adjustable up to 315°C Year of manufacture: 2022 Weight: 70 kg Belt dimensions: 410 x 1260 mm Baking area: 410 x 520 mm Belt speed: 30 sec - 15 min Output: 30-40 pizzas (26 cm diameter)/hour Godpfozub Ezex Ap Dsbu Baking time per pizza: 4 minutes Condition: used, overhauled, fully functional Further details: High-performance conveyor oven for up to 40 pizzas per hour with a 4-minute baking time Smallest professional digital conveyor oven for space-saving and easy installation in front and back areas Ideal for heating, cooking, baking and preparing crispy products 4 programmable menu buttons Very high efficiency even at low temperatures thanks to impingement technology Temperature range from 32°C to 315°C freely adjustable Belt speed can be adjusted continuously (30 seconds to 15 minutes conveying time) Equipped with on/off switch and digital touch panel for temperature and belt speed control The conveyor oven replaces conventional kitchen equipment such as salamanders, griddle plates, fryers and ovens Perfect for front-of-house cooking areas due to stackability and mobile base (optional) The electric conveyor ovens are equipped with an innovative and easy-to-use digital control and digital display of temperature and time Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (AGB).

Condition: used, first registration: 12/2025, 10-Foot Container Sauna Mobile outdoor sauna based on a 10-foot shipping container (external dimensions approx. 3.0 m length × 2.44 m width × 2.59 m height), repurposed into a fully equipped sauna with glass front, multi-level benches, and technical installations. The structure retains the robust steel construction of the container as a weatherproof outer frame, complemented by high-quality wood interiors, insulation, and glass glazing for optimal outdoor use. It is stackable, easily transportable, and designed for installation on level ground without a foundation. Base structure and exterior * Container made from powder-coated steel (anthracite grey) with ISO corner fittings and reinforced profiles for stability and weather resistance. * Fully open longitudinal side with a three-part glass front made of clear safety glass (sliding doors with stainless steel handles and floor seal) for panoramic views and natural light. * External fittings: cold water column with tap and ball valve, optional shower with spray head, ventilation opening with grille at the base of the container. Interior and sauna setup Walls, ceiling, and floor fully clad in thermally treated wood (e.g., spruce or aspen, light natural color) 14-20 mm thick, three-tier seating benches with backrests and footrest. * Bench configuration: lower bench approx. 40 cm high, middle approx. 90 cm, upper approx. 140 cm; ventilated slat construction for airflow and comfort. Gedpox Nb E Tjfx Ap Djbu * Floor equipped with sealed wooden decking and drain, small headrest, and integrated stone unit at the heater. Technical features and equipment Electric sauna heater (approx. 6-9 kW) with stone basket (about 20 kg olivine stones), wall-mounted control panel, and automatic overheating protection. * Ventilation: fresh and exhaust air vents with sliders (internal and external), smoke outlet and grill at ceiling/wall, indirect LED lighting behind benches. * Electrical installation: protected wiring with switches for heater and lights, integrated thermometer and hygrometer. Installation and mobility Set up on container feet directly on gravel or concrete, total weight approx. 1,200-1,800 kg, ventilated and drained. * Transport possible via forklift or crane, weather-protected seals on all openings.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 Gbedpfx Aozmh R Isp Deu • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Weather-resistant due to corrosion-resistant coating

Condition: excellent (used), functionality: fully functional, overall weight: 30 kg, inner dimension width: 790 mm, inner dimension length: 1,190 mm, inner dimension height: 810 mm, total width: 1,200 mm, total height: 990 mm, total length: 1,200 mm, We offer used Ecopack storage containers in various sizes: - 1200x800x1190mm (price: €55) - 1200x800x990mm (price: €55) - 1200x800x800mm (price: €45) The containers offered are foldable, feature a top lid, and are stackable. They are used, fully functional, and show no significant damage. Over 2,500 units are available, mostly with black walls. Rental options are available. This price applies only to full truckload orders. We do not ship individual items or small quantities. We speak Polish, German, and English. Gjdpjxzh E Isfx Ap Dsbu

Year of construction: 2026, condition: new, functionality: fully functional, Selling a roll-off container, 4-20 cubic meters, without a lid. Product description: For sale is a 4-20 cubic meter roll-off container without a lid, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: * Standard: Technical description 30720-1 * Bottom: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking bar: 5 mm * Securing bar Godszmhdhepfx Ap Debu * Front profile: 120 x 60 x 4 mm * Frame edges: U 100 x 50 x 4 mm * Information and warning labels: white and red * Color: entire RAL color range available * Coating: interior and exterior with zinc phosphate primer, exterior painted with synthetic resin paint (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the lid and sturdy hinges * Stackable and transportable with tilting truck systems * Weather-resistant thanks to corrosion-resistant paint

Condition: used, functionality: fully functional, This is a professional microwave oven from the manufacturer Sharp, model R-23AM. This machine, featuring rotary control and an LCD display, has 4 power levels, from 10% to 100%, making it ideal for quickly preparing individual dishes and hot drinks in minutes. The unit has been inspected in our in-house workshop and is fully functional, unused, and in very good used condition. You will receive an invoice with VAT shown. Our service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded devices at fair prices. Professional refurbishment/inspection and expert cleaning, tested and fully functional – or your money back. Flexible options for shipping or self-collection. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 510 x 330 x 180 mm Power connection: V: 230 / 50 Hz Fuse rating: 16 A Power consumption: max. 2.9 kW Gbedpfez Hkapex Ap Dju Weight: 33 kg Further details: Microwave output power: 1800 W Microwave power levels: 4 (100%/50%/20%/10%) Time setting: (depending on power level): up to 30 min. Memory setting for menus: 0 Repeat function Error message Start button Timer: mechanical (m/c), electronic (t/c): m/c Oven cavity volume in liters: 20 Air inlet Splash guard (top) Stainless steel oven cavity with ceramic plate Stainless steel housing Stackable Even cooking: rotating antenna system Condition: Used, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2011, condition: ready for operation (used), The Thermo Max Q 6000 Incubator Shaker is a stackable, generously sized incubator, with orbital shaking. Designed to promote cell growth by providing a controlled environment with continuous agitation, the Max Q 6000 ensures proper oxygenation and prevents cell settling. Features of the Max Q 6000 include a temperature range of between 10°C – 80°C, and a speed range of between 15 – 500 rpm. Three bright LED screens display speed, time and temperature, and the control panel is user friendly with a simple design. Operation can be run in continuous or timed modes, from 0.1 hour to 999 hours, or 0.1 minute to 999 minutes. Furthermore, up to 25 x 250 ml flasks can be accommodated, with 2 x height adjustable shelves and a lower platform. For safety, the Max Q 6000 has an over-temperature feature and an interlock which stops the shaking motion when the door is open. Inner chamber dimensions for the Max Q 6000 are 55.9 x 53.3 x 68.6 cm. Externally, the Max Q 6000 is powder coated with cold-rolled steel construction, and measures 83.8 x 69.8 x 102.8 cm. Key Features of the Thermo Max Q 6000 Incubator Shaker Stackable RS232 Interface Solid State Brushless DC Motor Capacity: 25 x 250 ml Flasks Operation: Continuous Or Timed LED Displays: Temperature/Time/Speed 2 x Adjustable Height Shelves Temperature Range: 10°C – 80°C Speed Range: 15 – 500 rpm (unstacked) 15 – 300 rpm (stacked) Max Load: 9.1 kg (shelf) Gsdpfx Aoz Etl Ssp Dobu 15.9 kg (platform) Platform Dimensions: 45.7 x 45.7 cm Inner Chamber Dimensions (L x W x H): 55.9 x 53.3 x 68.6 cm External Dimensions (L x W x H): 83.8 x 69.8 x 102.8 cm Good working condition. Please check out our other listings as well.

Condition: good (used), loading space length: 2,990 mm, loading space width: 2,440 mm, loading space height: 2,800 mm, Year of construction: 2011, Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Unknown Model: Office container Year of build: 2011 Condition: Used Data: Dimensions LxWxH: 2989x2435x2800 mm Colour: red Transport Points in accordance with ISO Standard: in the corners, forklift pockets present Stackable: 3-times Drainage of rainwater: Via circumferential drainage gutters in the frame, with downpipes in the corner posts Windows: white PVC-windows Powerinstallation: 2x double sockets Lighting (2x16W): 1x lamp Godszqbf Hjpfx Ap Debu Weight: 1.350 kg Special features: E-heating Information: Used, damaged, dents on the outer walls. Location: 41468 Neuss immediately available

Condition: used, maximum load weight: 12,840 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 46 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle no. G0124642_1 – Manufacturer: Krone. * Double corner fittings * Roll-up door (aluminum) * Keyhole system inside * Stackable * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing options Storage container – weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs needed. Undercarriage with signs of wear, some surface rust. Valid UVV certificate. Isolated paint chipping on components of the demountable body. Isolated surface rust on components of the demountable body. Deformations/stops on components – see pictures. Gsdpfxez A Rpio Ap Debu Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, loading space length: 6,060 mm, loading space width: 2,440 mm, loading space height: 2,800 mm, Year of construction: 2011, Empty weight: 2.000 kg General condition: average Technical condition: average Visual appearance: average Please contact Christian Theißen for more information Manufacturer: Unknown Model: BM 20 Year of build: 2011 Condition: Used Data: Dimensions LxWxH: 6055x2435x2800 mm Colour: red Transport Points in accordance with ISO Standard: in the corners, forklift pockets present stackable: 3-times Drainage of rainwater: via circumferential drainage gutters in the frame, with downpipes in the corner posts Weight: approx. 2.000 kg Information: Used, damaged, dents on the outer walls Gjdpfezqbdpjx Ap Dsbu Location: 41468 Neuss immediately available

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use Gbjdpfx Apsxhd Ixo Dou The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin

Year of construction: 2026, condition: like new (used), Binder KB PRO 130, model year 2026, ex-demo unit in new condition. 2-year warranty on spare parts. Product description: PRODUCT DESCRIPTION Gsdey Urc Hopfx Ap Djbu A versatile workhorse among thermostat chambers: KB PRO is our most efficient incubator with cooling. A temperature range from -20°C to +100°C and extensive programming functions enable a wide range of applications that go far beyond incubation. KEY FEATURES Temperature range: -20°C to 100°C Proven APT.line™ preheating chamber technology Energy-efficient cooling thanks to a modern inverter refrigeration unit Cooling using the environmentally friendly refrigerant R-290 Door heating to prevent condensation Adjustable fan speed Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner door made of safety glass coated with metal oxide Two wire shelves made of stainless steel Access port Ø 30 mm with silicone stopper Stackable design Intuitive controller with touchscreen, time segment programming, and real-time programming Internal data logger, measurement values in open format can be read via USB Independent temperature protection class 3.3 (DIN 12880) with optical and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB BINDER Multi Management Software APT-COM™ Basic Edition Optional CO₂ gas modules for plant cultivation (0-1%) and cell culture (0-20%)

Condition: used, maximum load weight: 31,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2016, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis with wedge-shaped design. Increased point load of approximately 25,000 kg over approximately 5,000 mm. 24,000 kg telescopic support winches with load and fast-speed settings. Lashing points in 5,000 kg, 6,000 kg, and 10,000 kg versions. 8 stake pockets (for 2 front walls). Aluminum roof rail with sliding cover. Rear stakes extendable to approximately 3,500 mm, for loading and unloading purposes only. Three sliding stakes per side. End stakes extendable laterally in the direction of travel. Front wall designed as a storage area with integrated shelving system, closed on the inside. DINKEL lift roof, mechanically adjustable in height, lift roof height 400 mm, operable on both sides or on one side. Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) with height adjustment in the stakes. Trailer can be driven under tarpaulin up to a total height of approximately 4,400 mm (open at the rear above the loading platform). Upper portal crossbeam with sliding cover, movable. Four rows of stackable 150 mm aluminum slats on the side (only 2 rows of slats in the upper bunk), 450 mm pockets at the bottom, 4 rows of pockets above, even spacing between them. WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV. Air suspension in ECAS version, with lifting and lowering function. Wabco Smart Board with engine load display and lift odometer. 3 x 10,000 kg SAF axles with drum brakes. 3rd axle as a friction-jointed trailing axle. 1st axle can be lifted. Tires 235/75 R 17.5. Dhollandia heavy-duty lift platform type DHLSU, load capacity 9,000 kg, load distance 1,000 mm, steel platform approximately 3,000 x 2,500 mm. Hydraulic additional support, automatic ground leveling. Loading platform with ramp function for inclining the platform, for use as a drive-up ramp, loadable up to a maximum of 13,500 kg. Chassis painted in mb-novagrau. Body painted white. Tarpaulins with customer lettering! Gbedpfxsy Dy Eho Ap Dsu

Condition: used, Year of construction: 1998, color: orange, overall weight: 12,000 kg, maximum load weight: 10,732 kg, empty load weight: 1,268 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/1998, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors. Gbodpfx Apezqcx Uj Dju Body: Stackable roll-off container with double doors, approx. 5.2 m³. The price refers to the lower container! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!