Used Stamping Press for sale (27,457)

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Nlodpfxjtx E Rqs Aanek Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Nlodpfx Ajpvlf Sjansk Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Nsdpfx Aowtw E Deanjlk Beheizung mit Gas / Heating with Gas Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Manufacturer: ROVETTA Model: S4-600 Year: 2002 Condition: Used Stock number: 0363-0364-0365-0366 Pressing force: 800 tons Number of connecting rods: 4 Drive mechanism: LINK DRIVE Ram stroke: 900 mm Ram adjustment: 500 mm Ram dimensions: 4,500 x 2,300 mm Nledpfx Aaow Hck Eonjk Table dimensions: 4,500 x 2,300 mm Lateral opening in frame: 2,450 mm Usable front passage: 4,500 mm Die space at BDC: max. 1,500 mm, min. 1,000 mm Hydraulic safety device: Present Side removable carriage: Present

Condition: refurbished (used), Year of construction: 1992, machine/vehicle number: 131 644, Attention: machine has been 2022 completely mechanically and electrically retrofitted before delivery press force: 1000kN stroke: 30 - 100mm slide adjustment: 80mm speed: 50 - 300/min Nodpfsfn Affjx Aanslk shut height. 350mm table dimensions: 1080 x 800mm slide dimensions: 900 x 620mm new electrical controller SIEMENS S7 1500

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) Nodod R Saqopfx Aanjlk • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Nedpfxedzqlts Aanelk Weight approx. 5.5 tons good condition

Condition: good (used), Year of construction: 1976, Pressing force: 20 t Stroke rate: max. 150 rpm, adjustable via PIV gearbox from the control panel Stroke, adjustable: 10 - 50 mm Installation height: 270 mm (maximum stroke at top, without wedge plate) Ram reinforcement: 50 mm Table area: 340 x 320 mm (W x D) Pass-through opening: 70 x 180 mm (W x D) Nljdpowufrzofx Aanjk Ram area: 160 x 230 mm (W x D) with wedge plate Drive power: 2 HP Features: - 1 connecting rod - Double V-ram guide - Motorized oil lubrication - Manual ram adjustment, 50 mm - Mounting bracket for feed unit, tiltable - 3 cams for feed unit etc. - Free-standing control panel - Forward and reverse operation - Manual setup using a rod

Condition: used, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Nlsdpfx Aevi Hh Ijanjk Online-Video-Inspection...

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Nodpfofxx E Sex Aanolk

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Njdpfei A A Tbex Aanolk Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication Nledjgpxc Sepfx Aanjk - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: used, Prägepresse / Hot Foil Stamping Press Nodet Drnxopfx Aanelk Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Njdsfxx E Ijpfx Aanelk

Condition: good (used), Year of construction: 1986, operating hours: 10,000 h, power: 30 to (US) , app. 270kN bolster area: 30" x 21" = 762 x 533mm ram-area: 800 x 300mm strokes/min: 100...1400 1/min stroke (fixed): 1" = 25,4mm ram adjustement: 1,75" = 44,5mm Equiped by * Hydraulic clutch * Roll feeder Nledpfx Asnl Snoanok Make: Sankyo Type: Variax V70 Width: max. 100mm Only app. 10.000 working hours

Condition: used, machine/vehicle number: 24118, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video Nedpeut Tkgefx Aanolk We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1985, condition: excellent (used), Stamping Press used in the fabricación of vehiclís, 2 fully automated lines, each consist of 5 preses, 1x1600 T, 2x1000 T, 2x500 T, with robots, can be sell as complete line or individually Njdpfx Aajfxxu Tjnjlk

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment Njdedhzf Iepfx Aanolk with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nlsdpfjh Ayg Ujx Aansk Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 18040, Kniehebelprägepresse - Embossing hot stamping press Hans Schilling HSMSerial-No. 18040 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Njdpfx Ash Axf Hsanslk

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine Njdpfx Aaed Hp Tzenslk -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: good (used), Heidelberg Tiegel TP Letterpress Hot Stamping This machine is ready for hot foil stamping, die cutting, printing, creasing, perforating, and more. The machine is in very good condition. Original Heidelberg ART hot foil stamping machine with temperature control and a drilled heating plate. This machine is from the end of its production years, an incredibly rare model. Nsdpfjx N Dwrsx Aanslk This version is distinguished by its exclusive roller holders, a drawer under the machine, and a large protective cover for the wheel. Inking system. Hard platen for the pressure plate. Set of accessories and tools. Machine format: 26x38cm 600gsm grammage 5000 sheets/h speed 1200kg weight 400V power supply Fully complete, includes two frames, spare parts, and instructions.

Condition: good (used), Bookbinding Press 50×40 with Base The machine is fully operational and ready for use. Format: 500×400 mm Pressure: 5 tons Nledpfex N D Tyjx Aanjk

Condition: new, Year of construction: 2024, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Nedopl Ugzepfx Aanjlk Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 5,000 mm, pressing force: 200 t, total length: 4,300 mm, installation height: 5,000 mm, total width: 2,250 mm, clearance between the columns: 1,000 mm, table length: 850 mm, operating pressure: 250 bar, spindle diameter: 400 mm, reverse speed: 567 mm/s, table width: 800 mm, year of last overhaul: 2018, overall weight: 16,800 kg, stroke length: 200 mm, space requirement length: 4,300 mm, space requirement height: 5,000 mm, Equipment: airbag, crane, Refurbished and Automated Mecolpress 200L Hot Forging Press (Siemens S7 Controlled) We are offering for sale our Mecolpress 200L fully automatic hot forging press system, which is currently operating in our production line. The machine underwent a comprehensive overhaul and modernization in 2018. The system has been upgraded to meet current production standards, including a renewed electrical system and a complete automation package. It is fully operational and immediately ready for production. Main Features and Benefits - Complete Overhaul: All mechanical and hydraulic components have been serviced, worn-out parts replaced, and the machine's performance restored to factory specifications, ensuring long-lasting and reliable operation. - Modernization (Siemens S7): The electrical system has been completely renewed with Siemens S7 PLC and latest-generation automation components, enabling precise control, easy fault detection, and modern production monitoring. - Fully Automatic Cell: All processes from furnace loading to forging and unloading are fully automated, minimizing human intervention and increasing productivity. - Complex Part Manufacturing: The 5-axis AP4 sub-press unit allows production of parts with complex internal geometries (such as valve bodies, Y-fittings, etc.) that cannot be manufactured with standard presses. - Production Ready: The machine is currently in active operation and will be delivered to the buyer with a custom die set (flange and 4 inserts). Technical Data - Pressing Force: 200 Tons - Strokes per Minute: 85 - Ram Stroke: 200 mm - Table Dimensions: 850 mm x 800 mm - Distance Between Columns: 1,000 mm - Pneumatic Cushion Force: 17.5 Tons - Total Weight: 16,800 kg - Main Motor Power: 25 HP Included Equipment The system is sold as a complete cell: - Mecolpress 200L Press (Refurbished, Siemens S7 controlled) - CP mod. 140-4P Heating Furnace (automatic loading conveyor, 4-guide system) - AP4 Sub-Press Unit (5th axis/angled punching capability) - Complete Rotary Automation System (loading arm, IR sensors, grippers, unloading spoon, lubrication system) Nedpox E Untsfx Aanjlk - Custom Die Set (including flange and inserts as per your drawing) Since the machine is actively in production, it can be inspected by appointment and tested under working conditions.