Used Stamping Press for sale (12,676)

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm Dedpfowup Efjx Aptocl -Weight: 1.1 kg

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Dedpfx Apszy Hhlstecl Drive motor 55 kw

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 470 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, table width: 900 mm, table length: 3,200 mm, throat depth: 400 mm, Equipment: safety light barrier, Machine type Electro-hydraulic servo numerical control bending machine Order Type Non-Standard Basic parameter Pressure 220t Workbench length 3200mm Workbench height 900mm Column spacing 2500mm Throat depth 400mm Slider stroke 200mm Maximum opening height 470mm Fast descent speed 120mm/s Return speed 120mm/s Work speed 10mm/s Rear gauge (X-axis travel) 550mm Maximum operating speed of the X-axis 400mm/s X-axis positioning accuracy ±0.05mm X-axis repeat positioning accuracy ±0.02mm Y-axis positioning accuracy ±0.02mm Y-axis repeat positioning accuracy ±0.01mm R-axis stroke 100mm Maximum operating speed of the R-axis 100mm/s Dsdpfozgzt Nox Aptecl Working accuracy: Straightness ±0.2mm/m, angularity ±0.5°/m KW Main motor power (servo motor) KW 22KW Rated power (servo motor) KW 25.03KW Fuel tank capacity 200L Oil product model 46# Hydraulic Oil" Overall dimensions (length * width * height) 4200mm*1950mm*2700mm Weight 12T

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 65951607, color channels: 4, paper weight (min.): 60 g/m², paper weight (max.): 500 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 400 V, Koenig Bauer / KBA Rapida SRO 4 | 1988 | Offset printing machine Year: 1988 Format: 52x72 cm Colours - 4‑colour offset Speed -12,000 sheets/hour Paper Weight - 60–500 g/m² Feeder - Mabeg (± Technotrans) Inking Adjustment - Colortronic remote key Dampening - Technotrans / Varidamp (alcohol) Dryer - Infrared Dcsdpfxswzt Tts Aptol Powder Spray - Weko Cooling - Baldwin Cylinders Chromium-plated

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar Dcedpfxszw Dbks Aptjl - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, Dimensions: length 1800 mm, width 1800 mm, height 1900 mm . Weight netto 3000 kg. Eletric power of the press: 380 V 50 Hz 33 kW 70-100 A Capacity of the press: 450-500 kg/h Pressure: minimum 1000 kg/cm², maximum 1700 kg/cm2 Dcedpfxoc Nb Rfo Aptsl Dimensions of the briquette: length 150 mm width 60 mm height 40 – 105 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours Dcodpotmugcofx Aptsl

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1501, total width: 3,000 mm, total height: 2,700 mm, total length: 21,000 mm, overall weight: 4,000 kg, space requirement width: 5,000 mm, Used ASCOT BRICMATIC 1-65/150 briquetting press, manufactured in 2000. This unit features a triple production line configuration, designed for the efficient industrial compaction of wood residues, sawdust, and shavings into high-density biomass briquettes. It is a robust and reliable solution for woodworking plants and biomass production facilities. The machine is currently partially disassembled in our warehouse. Dcodpfezxyd Rsx Aptol

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm - Die cushion tonnage: 24 – 160 tons Dcjdpozy Uvqefx Aptol - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm - Mobile press tables: No. 2 - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min - Working speed (100%): 46 mm/min

Condition: excellent (used), Year of construction: 2001, - 1 Schuler press - Capacity: 1000 tons - Stroke: 1,300 mm Djdpjzy Uuysfx Aptocl - Die cushion tonnage: 30 - 200 tons - Die cushion stroke: 200 mm - Daylight between press frames (Pmi): 800 mm - Work area: 2,500 x 2,100 mm - Movable tables for press: 2 - Approach speed: 600 mm - Working speed at 50%: 96 mm - Working speed at 100%: 46 mm

Condition: excellent (used), Catalogue number: 7984 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70 mm Dcsdszwwxcjpfx Aptel - hopper diameter: 1000 mm - output: up to 10 briquettes/min, approx. 90 kg/h - automatic machine operation - motor: 5.5 kW - dimensions (L/W/H): 1800x1200x1500 mm - weight: approx. 650 kg ADVANTAGES – Italian manufacture – used briquetting press – not repainted – very good condition Net price: 33,900 PLN Net price: 8,070 EUR (at an exchange rate of 4.2 PLN/EUR) (Prices may vary with significant currency fluctuations)

Condition: used, Year of construction: 1997, sheet width 1015 mm Djdpfxsuiz Iwe Aptecl plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English)

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Dsdpfx Aoi A S I Sjptocl Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 Dedpfx Ajt I D Thoptjcl speeds, a joystick and a hand pump for precision pressing fitted.

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and Dsdpfxji Db Ere Aptecl beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke Dcjdszkl Huspfx Aptel - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for Dodpfxei A S I De Aptecl precision work is suitable.

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories Dedogvkmropfx Aptscl hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: new, pressure 60 t stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Dcedpfx Aoi A S I Ioptol Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Dedpfx Aew U U S Njptocl Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Used machine Equipment and technical data: Djdpfxjzyy Aps Aptjcl

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Ram area: 560 × 460 mm Table area: 1,000 × 600 mm Table thickness: 120 mm Djdpezyamzofx Aptocl Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Condition: new, Year of construction: 2026, pressing force: 220 t, Equipment: documentation/manual, safety light barrier, New, immediately available, top-spec CNC press brake YAWEI PBH220/3100-7C Dcodpfezyafkjx Aptol - Pressing force: 2200 kN - Max. bending length: 3100 mm - Year of manufacture: 2026 - CNC-controlled hydraulic crowning - Cybelec DELEM DA66 control system - WILA upper tool clamping - Controlled axes: X, R, Y1/Y2, Z1/Z2, Delta X - Servo bending aid (up to 200 kg) - 60 mm table with 13.5 mm x 22 mm slot for insert dies - 2 front support arms, adjustable on linear guides - CE compliant with Fiessler AKAS IIF (automatic height adjustment) - 24-month warranty - Commissioning and training included

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed Dcedpexaayhofx Aptol * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., Djdpfx Apoxaar Dstecl but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual