Used Star Ecas 20 for sale (115)

Year of construction: 2006, condition: refurbished (used), machine/vehicle number: FF102-062, • overall dimensions mm; • power supply 5.0 kW; • power supply 400 V; • pressure 3-5 bar; • 102 single nonspring-actuated needles 2 mm; • conveyor width 400 mm. Ffjdpfx Aod D I Hqsfpju

Condition: good (used), Year of construction: 2011, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 J Type N Year of manufacture: 2011 Equipped with: FANUC 32i Model B control Synchronous spindle Live tooling C-axis Subsequent machining (backworking) High-pressure pump Chip conveyor Parts conveyor Oil mist extraction unit Bar feeder: FMB TURBO 3-36 Fedpfxsycqx Ie Afpsfu

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Manufacturer: Inject Star Model: P60 Ffjdpfx Ajycc H Rsfpju Power supply: 400 V, 3Ph, N Installed power: 18 kW Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: used, Year of construction: 2008, functionality: fully functional, Manufacturer: STAR Micronics Type: SR-32J Year of manufacture: 2008 Condition: Fully operational Availability: Immediately Location: Germany Technical Data (Summary) Fedpsya Euxjfx Afpjfu Max. bar capacity: 32 mm CNC Swiss-type lathe with sub-spindle Multi-channel/multi-axis machining Ideal for complex precision and series production Equipment / Accessories Automatic fire extinguishing system by Kraft & Bauer Chip conveyor Bar feeder IEMCA BOS 332-E Complete system for automated batch production Condition & Service Machines are fully operational Regularly maintained In production until recently Immediately ready for demonstration Inspection Inspection and test run under power possible at any time by appointment Demonstration welcome at our premises

Condition: good (used), Year of construction: 2014, functionality: fully functional, STAR sprue picker From ongoing production Fully functional 8 units available Price: 1,100 EUR per unit Fodpfxsyffcgs Afpsfu

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting Fsdpfx Afovi I Nmepsfu - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Volume: approx. 1,25 m³ Cutting width: 1.500 mm 4 shafts combined adaptor for excavator and wheelloader Fsdponubawofx Afpsfu

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories Ffjdsmu Rtujpfx Afpou main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, Axes: X = 2500 mm, Y = 1100 mm, Z = 1500 mm. Fully functional, from ongoing production. Two units available. Price: 6,500 EUR per unit. Fjdpfxoyc E Evj Afpofu

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,797 h, Control Unit Brand FANUC Model 21i-TB Additional Equipment Fodjx D Sm Uepfx Afpsfu Door monitoring / Spindle clamping device for the main spindle / Main spindle indexing 15° (not applicable for 480S) / Work light / Disconnect switch (control current: 30mA, available as an option for 480A) Tool set This Star SB-16 was manufactured in 2005. It features a robust FANUC control system, separate coolant tank, automatic central lubrication, and a 6-station tool holder. Ideal for precision turning, it includes a 4-spindle drill holder and a comprehensive workpiece removal system. Consider the opportunity to buy this Star SB-16 swiss type turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231109, Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high-performance CNC control series 31i-B5, 3-channel control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Bar diameter max. 38 mm, Turning length max. 350 mm, Main spindle, max. speed 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle drive power 7.5 kW Turret Speed max. 5,700 rpm, (with corresponding tool holder also higher) Turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Coolant: Oil Fsdpfxex Swals Afpjfu Weight: 6.25 tons Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (tension system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr230334, Year of manufacture: 2003 (0450) FANUC 16i-T CNC control with 9 axes 9 axes (X / C1 / Y / E / B / A / X / C2) Max. bar diameter: 13 mm Ffjdpfox Sv T Rsx Afpsu Max. turning length: 205 mm Main spindle, max. speed: 12,000 rpm, C-axis Sub-spindle with collet chuck, max. speed: 12,000 rpm, C-axis 4-position tool holder 3 cross-drilling units Turret with 8 stations Various additional tool holders, tailstocks Kraft & Bauer fire extinguishing system Parts conveyor belt Operation/programming/electrical/spare parts manuals Machine operating tools Up to 29 turning tools and up to 19 driven tools possible Connected load: 9.0 kVA Tank capacity: 170 L Bar feeder: FMB Turbo 2-16 /3200/A / for Ø2–Ø20 mm Machine coolant: oil Machine dimensions: approx. 2700 x 1400 x 1700 mm Machine weight: approx. 1700 kg Bar feeder dimensions: approx. 4300 x 600 x 1800 mm Bar feeder weight: approx. 700 kg Peripherals & accessories dimensions: approx. 1200 x 800 x 1000 mm Peripherals & accessories weight: approx. 200 kg The machine can be inspected live under power by appointment. Technical data and information are subject to change and error. Subject to prior sale!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC Swiss-type automatic lathe Manufacturer: STAR Model: SX-38 A Year of manufacture: 2020 featuring: FANUC 31i Model B5 control, Synchronous spindle, Driven tools, Y2-axis, Y3-axis, 2x C-axis, X2-axis, X3-axis, B-axis (programmable on linear carrier), Independent backworking (8 stations), Turret, Chip conveyor and chip bin, Parts conveyor belt, Fire extinguishing system, Oil mist extraction, JBS guide bushing unit, Usable as both long- and short-part turning, High-pressure pump, Bar loader magazine FMB TURBO 5-65 Fedpfx Asx Sx T Tefpofu

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm Fjdpfx Asfngxbsfpjfu -Weight: 10 kg

Condition: excellent (used), CNC-swiss type automatic lathe Ffedpfoxl Etqox Afpsu brand: STAR type: SR-38B new in: 2017 equipped with: FANUC 31i - B control subspindle back working driven tools 2x c-axis programmable b-axis y2-axis x3-axis switchable between guide bush and non-guide bush modes high pressure pump ol mist parts conveyor chip conveyor fire extinguishing system automatic barloader FMB LSK 38

Condition: good (used), Year of construction: 2011, functionality: fully functional, Star SR10J Type C FMB Minimag 20 bar feeder Ffedpjwic Ngefx Afpeu High-pressure unit SHD 100 Mayfran chip conveyor

Condition: used, Applicable material: Food Power: 5 kW (7 HP) Empty weight: 725 kg Dimensions (LxBxH): 185 x 102 x 173 cm Cargo space capacity: 750 l Current frequency: 50 Hz Voltage: 380 Ffodpex Tcp Usfx Afpsu

Condition: used, Swiss-type cnc lathe STAR SE-12 Ffodpfx Afowp T I Tjpju

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 8000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 57297 [h] - Number of spindle hours : 39537 [h] EQUIPMENT - CNC : Fanuc 18iT - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : IEMCA SMART 316/32L - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Number of turning tool holders : 3 Ffedpfxeu Elk Dj Afpju

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 8000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 73252 [h] - Number of spindle hours : 50900 [h] EQUIPMENT - CNC : Fanuc 18iT - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank Fjdpfx Aeu Elkqsfpofu - Bar loader : IEMCA CH 220/32L - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Number of turning tool holders : 3

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] - Number of turrets : 1 UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY Fjdpeuha Elsfx Afpefu - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT Ffjdpjuhazaofx Afpsu - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] - Machine weight : 3.100 [kg] MACHINE HOURS - Number of working hours : 35.367 [h] EQUIPMENT - CNC : Fanuc 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump - Bar loader : FMB Turbo 3-36/3200/A (2008)) - Ejection of workpiece - Parts catcher - Parts conveying strip - Chips conveyor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 10'000 [rpm] COUNTER-SPINDLE - Z stroke : 140 [mm] GUIDE BUSH HOLDER 1 - Number of positions : 5 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 3 x 380 [V] - Total installed power : 3.5 [kVA] EQUIPMENT Ffsdpfxouhaxxj Afpju - CNC : Fanuc 21iT - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : LNS Alpha 320

Condition: excellent (used), Inject Star massaging tumbler 2600 litres with cooling, complete with aggregate and vacuum pump. Ffjdpfx Aex I Sxnefpsu

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT Fedpevivygofx Afpsfu total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *