Used Stator for sale (233)

Condition: ready for operation (used), Siemens stator for 1FT6086-1AF71 servo motor, serial number: EL695420801002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iisdpezhdt Ijfx Aiyjg

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Iedpsx R A Dasfx Aiyjig Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Condition: used, Year of construction: 2006, beside the press granulator Tria 20-18 JM 1,5 KW Manufacturer: Tria Type: 20-15 JM Manufacture year: 2006 Power: 1,5 kW Intake: 180x200 mm Rotor knife: 4 Stator knife: 2 Rotor diameter: 180 mm Rotor width: 200 mm Iiodswiwcbjpfx Aiyeg Tria 20-18 JM 1,5 KW year 2006 price: € 1,950 contact: Mr. Rainer Eckerle

Year of construction: 2016, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 09144PER2A, Refrigerating scroll compressor Trane CSHC 093R0A0S Technical data: ♦ Positive displacement refrigerant compressor ♦ Scroll compressor ♦ Hermetic compressor, internal motor ♦ Compressor model & development sequence ♦ 3500 rpm vertical welded steel shell Designates size - nominal tons = 9.3 tons Voltage designator 208/230-60-3 Number of cylinders that unload zero -no unloading Design sequence (alpha). Factory assigned prints on the nameplate. Unloader control and method of unloading - no unloading; Basic compressor variation: 1 Braze copper-clad refrigerant connections Isdpfxjfm A Dme Aiyeig 2 Rotalock oil equalizer fitting with threaded cap The principles of operation: The suction gas is drawn into the compressor. The gas then passes through the gap between the rotor and stator, cooling the motor. The gas then enters the intake chamber, which encircles the scrolls. The oil in the suction gas is separated by changing directions and impinging on surfaces within the compressor and then draining back to the oil sump. Finally, the suction gas is drawn into the scroll assembly where it is compressed and discharged into the dome of the compressor. The dome of this compressor acts as a hot gas muffler which dampens the pulsations before the gas enters the discharge line. How the Scroll Compressor Trane Works General A 3-D compressor has two scrolls. The top scroll is fixed and the bottom scroll orbits. Each scroll has walls in a spiral shape that intermesh. Inlet - First Orbit As the bottom scroll orbits, two refrigerant gas pockets are formed and enclosed. Compression - Second Orbit The refrigerant gas is compressed as the volume is reduced closer to the centre of the scroll. Discharge - Third Orbit The gas is compressed further and discharged through a small port in the centre of the fixed scroll. Price: 1.000 Euro + TVA, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Fanuc stator for A06B-0123 AC servo motor, serial number: C945C3755, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iisdpezbgc Tjfx Aiyjg

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 motor, serial number: YFW148399803009, used, in good condition, 100% functional, scope of supply as shown in the photos. Iedpfx Aiozahwveyoig

Condition: ready for operation (used), Indramat stator for MAC 090A-0-RD-4-C / 110-A-0 / WI522LX motor, serial number: 51271, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iodpfx Ajzahu Uoiysig

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 motor, serial number: YFV645060303010, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpfx Aijzbgd Rsyoig

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 motor, serial number: YFV745060304007, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iijdjzbgfbepfx Aiyog

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA Iiedpfx Asy D Hp Toiysg • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A Iijdpfx Aey D Hrzjiyjg • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Iisdpfx Aev U Ag Doiyeg Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock.

Condition: used, Year of construction: 1989, Manufacturer : Rayneri / VMI Model : Ultramix ME 120 RB Type: Stirrer - Mixer on stand Year: 1989 Agitation : rotor stator Motor power: 1.5 kW – 1,500 rpm Speed variation: mechanical Adjustment of the height of the mixing head from the floor: 0–85 cm Length of stirring shaft: 90 cm Ijdpeyzt Uqefx Aiyeig Up and down: manual with counterweight Leg clearance: max. 70 cm Machine dimensions: W 100 x D 130 x H 230 cm

Condition: ready for operation (used), Fanuc stator for A06B-0128-B077 AC servo motor, serial number: C95YC1783, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iisdpfx Aiey T Dmzsysg

Year of construction: 1995, condition: used, Manufacturer: Forplex Model : F00 Year : 1995 Type : Hammer mill Material : stainless steel Capacity: a few kg/h. Rotor type: hammers (result: fine and medium-fine) Stator type: fixed hammers Rotor diameter: 85 mm Inner diameter of grid: 100 mm Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Vibrating feed hopper Iodpfx Asyfw Ibjiyeig Motor power: 0.55 kW (3000 rpm) Door security Mobile frame on wheels    

Condition: ready for operation (used), Stator for Indramat MAC 90A-0-RD-2-C / 110-A-0 three-phase servo motor, serial number: 13545, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iijdpfx Aioy T Dnroysg

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Rotor knives: 6 Stator knives: 2 Inlet cross-section approx. 519×316 Drive motor: 18.5 kW Pneumatic tilting device for upper housing section Iiedpsyr Ttmjfx Aiyjg Without control cabinet and electrical wiring (can be provided for an additional charge). Spare parts and additional plant components are available.

Condition: used, machine/vehicle number: 11627, Rotor diameter: 220 mm Rotor width: 160 mm Rotor knives: 3 Stator knives: 2 Infeed opening approx. 400×400 mm Drive motor: 6.5 kW Iijdpfeyr Tt Hjx Aiyeg

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Iiodeubyyvopfx Aiyeg

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Iisdezp Slzjpfx Aiyjg Rotor width: 620 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Drive motor: 22 kW

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm, Rotor length: approx. 600 mm, Rotor diameter: approx. 450 mm, Heavy-duty design, Closed solid rotor, 3 rows of rotor blades (9 pieces), new Isdpsh Igygsfx Aiyeig 2 rows of stator blades (4 pieces), new with wear protection (Hardox), new, Screen basket + 1 screen, new, with control cabinet, approx. 6 m cable, newly wired, Housing temperature monitoring Hydraulic unit, Shredder, ideal for shredding solid parts, Testing / demonstration possible by appointment.

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor knives 2 rows of stator knives Iiedpfx Aieyr Tk Ssyog Cross section approx. 250 x 300 mm Drive: 5.5 kW

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW Iodpfx Aijyr Tlcoysig The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: ready for operation (used), Fanuc stator for A06B-1401-B105 AC spindle motor, serial number: C20ZS0620, used, good condition, 100% functional, scope of delivery as shown in photos. Iijdpfx Aisx Dt Ugjyjg

Year of construction: 2006, condition: used, beside the press granulator Hellweg MDS 120/150 1,5 KW Year: 2006 Power: 1,5 kW Application: Iiedpfx Aijixt Hlsyog Feed opening: 150x150 mm No. rotor knives: 3 No. stator knives: 2 Rotor-Ø: 150 mm Rotor-width: 120 mm Price: € 2.750,00 contact: Mr. Rainer Eckerle