Used Stator for sale (260)

Condition: used, machine/vehicle number: #14200, Rotor diameter: 500 mm Rotor width: 1000 mm Number of rotor blades: 96 Number of stator blades: 48 Inlet cross-section: approx. 500 x 1000 mm Bsdpfx Asz Svb Roqtolp Drive motor: 45 kW

Condition: used, machine/vehicle number: #14199, Rotor diameter: 800 mm Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Drive motor: 110 kW Bljdpjz Svb Djfx Aqtjp

Condition: used, machine/vehicle number: #14195, Rotor diameter: 457 mm Bljdpfx Aqoz Svcbotjp Rotor width: 1500 mm Number of rotor blades: 102 Number of stator blades: 2 Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 75 kW

Condition: used, machine/vehicle number: 14153, Rotor blades = 3 Bjdpo Aa D Dzsfx Aqtslp Stator blades = 3 Drive power: 4 kW

Condition: used, machine/vehicle number: 10460, Rotor diameter = 400 mm Rotor width = 600 mm Blodpfx Ao Admchjqtsp Number of rotor blades = 5 Number of stator blades = 2 Drive power = 30 kW

Condition: used, Year of construction: 1985, Manufacturer : Dumek Model: – Year : 1985 Type: Vacuum mixer / Homogenizer Total volume: 80 L Useful volume: approx. 50 L Slow agitation : Stirring / counter-stirring Rapid agitation : rotor / stator 3.3 KW Up/down: mechanical Tilting: manual Bodpfx Aqox R Awaotolp Jacketed with integrated heating unit Immersion heaters (new): 2 x 3000 W Regulation: mechanical Tank bottom sample Vacuum pump New scrapers are required; these items can be quoted separately.

Year of construction: 1965, condition: used, Manufacturer: Alpine Model: 400 Z Year: 1965 Type: Pin mill Rotor diameter: 400 mm Engine power: 22 kW ATEX classification: Ex II2G Ex daIIC T4 Bedpfszmi Hkex Aqtelp Maximum permissible speeds of drive shafts: 2,500 – 7,500 rpm Materials : House : Cast iron Rotor / Stator: Stainless steel Door with minor warping taken into account during refurbishment (suitable seal fitted, tightness ensured)

Year of construction: 1997, condition: used, Getecha GRS 252 - A10.26 5,5 KW year 1997 knives verygood ! Year: 1997 Power: 5,5 kW Application: Feed opening: 400x400 mm No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 300 mm Bledpfx Aqeqnuluetop Rotor-width: 105 mm Price: € 2.950,00 contact: Mr. Rainer Eckerle

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, For sale: Stamford HCM634J2 alternator. 675 kVA, 690 volts. Rotor is new. Stator is used but refurbished and in good condition. Bodpfxeyt Hhto Aqtslp

Condition: used, Rotor diameter = 400 mm Bledpfx Aj Admcusqtjp Rotor width = 700 mm Number of rotor blades = 3 Number of stator blades = 2

Condition: ready for operation (used), Indramat stator for 2AD 132B-B35RB1 asynchronous main drive motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfx Aqszv Hmgstslp

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.261, Like-new 2-component mixing and dispensing system Mur.Tech KMD-3000 V2 (year of manufacture 2026), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material feed thanks to an eccentric screw pump. Bljdpjy Txfxjfx Aqtjp This V2 version is additionally equipped with container heating (30–150 °C per container) and vacuum degassing of the materials – ideal for temperature- and bubble-sensitive applications. Highlights: - Modular design: complete material flow path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material temperature control throughout the entire material path - Material change in just a few minutes – almost no material loss - Stator change with only 3 screws – service without production downtime - Pinch valve and mixing tube change without tools in seconds - Lightweight mixing head made of carbon / aluminum / GRP – ergonomic - Swivel arm for fatigue-free handling (robot mount can be retrofitted) - Mobile thanks to the roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V2, year of manufacture 2026 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, stepless Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, capable of withstanding overpressure and vacuum, with electric inclined blade stirrer Container heating: heating jacket per container, temperature range 30–150 °C Material degassing: vacuum pump, both containers can be switched (individually with full performance or simultaneously with half performance) Mixer: static or dynamic possible Operation: gun or touch HMI Control: Beckhoff IPC with 15.6" touch HMI Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Level monitoring of the material containers - Clogging monitoring - Condition monitoring of the pinch valves - Flow measurement and bubble detection Discharge methods: continuous, pulsed, by weight Connection: 400 V / 16 A, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Data logging: Recording and saving the potting data in the Mur.Tech Cloud is possible upon request. The analysis over a longer period helps to improve efficiency and to detect maintenance cycles early. Connection to the company network is possible both wirelessly and via cable. Application areas: adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: spare parts supply and service by the original team. Sold as seen, with exclusion of all warranties. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: used, machine/vehicle number: 11635, Cutting mill housing with rotor Bjdj Aa D D Uepfx Aqtelp Rotor blades = 3 Stator blades = 2 Opening: 500 x 300 mm

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System The final reduction process takes place in the lower chamber, which consists of: Bedpfx Aqewtmw Ajtjlp -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Hansa Food-Mix 2000 – Industrial Cream Aerator / Continuous Mixer (similar to Mondomix®) For sale is a powerful Hansa industrial mixer Food-Mix 2000, specifically designed for the continuous processing and aeration of cream and similar products under hygienic conditions. The machine impresses with its robust stainless steel construction, precise process control, and high production capacity – ideal for use in the dairy and food industries. - Manufacturer: Hansa Industrie-Mixer GmbH & Co. KG (Germany) - Model: Food-Mix 2000 (re-infection free) - Year: 1998 - Design: Stainless steel frame and housing - Mobile: Machine mounted on castors - Infinitely variable mixing head drive - Speed range: 80 – 450 rpm - Motor power: 9.2 kW Blsdpey I A Erjfx Aqtep - Foam density: 400 – 900 g/l (cream) - Specific feed density: 1,000 – 1,200 g/l (cream) - Throughput: approx. 300 – 1,500 kg/h (cream) - Dynamic stainless steel mixing head - Mixing head volume: approx. 9 litres - Separate cooling for rotor/stator possible - Can be sterilized with steam

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm Bljdpfey D Hp Tjx Aqtop • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz Bedpfoy D Hrzjx Aqtjlp • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1995, condition: used, Manufacturer: Forplex Model : F00 Year : 1995 Type : Hammer mill Material : stainless steel Capacity: a few kg/h. Rotor type: hammers (result: fine and medium-fine) Stator type: fixed hammers Rotor diameter: 85 mm Inner diameter of grid: 100 mm Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Vibrating feed hopper Motor power: 0.55 kW (3000 rpm) Door security Mobile frame on wheels   Bljdpfoyfw Ibjx Aqtsp  

Condition: used, Year of construction: 2006, beside the press granulator Tria 20-18 JM 1,5 KW Manufacturer: Tria Type: 20-15 JM Manufacture year: 2006 Power: 1,5 kW Bodpfewiwcbsx Aqtslp Intake: 180x200 mm Rotor knife: 4 Stator knife: 2 Rotor diameter: 180 mm Rotor width: 200 mm Tria 20-18 JM 1,5 KW year 2006 price: € 1,950 contact: Mr. Rainer Eckerle

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Bedpjx R A Dajfx Aqtelp Product example : paints, pastes, …  

Condition: used, Year of construction: 1992, In-line Stephan Microcutter unit with Edak centrifugal pre-filter.   Manufacturer: Stephan Mikrocut Blodpfsx R Appox Aqtjp Model : MCH 20 P Type : In-line Cutter / emulsifier Year : 1992 Power : 15 KW Intensity : 23 A Speed : 2925 RPM Production : 3000 l/h Rotor stator : single stage   Manufacturer : EDAK Model KSF 65 RH Type: centrifugal filter Year : 1999 Material: Stainless steel Double jacket Rotor Ø 150 x 350 mm

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Bedpfxjzfwvwj Aqtslp Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Electrical cabinet - Touchscreen HMI for controlling the entire unit - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Weight : 500 kg

Year of construction: 2016, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 09144PER2A, Refrigerating scroll compressor Trane CSHC 093R0A0S Technical data: ♦ Positive displacement refrigerant compressor ♦ Scroll compressor ♦ Hermetic compressor, internal motor ♦ Compressor model & development sequence ♦ 3500 rpm vertical welded steel shell Designates size - nominal tons = 9.3 tons Voltage designator 208/230-60-3 Number of cylinders that unload zero -no unloading Design sequence (alpha). Factory assigned prints on the nameplate. Unloader control and method of unloading - no unloading; Basic compressor variation: 1 Braze copper-clad refrigerant connections Blsdpfx Aofm A Dmjqtop 2 Rotalock oil equalizer fitting with threaded cap The principles of operation: The suction gas is drawn into the compressor. The gas then passes through the gap between the rotor and stator, cooling the motor. The gas then enters the intake chamber, which encircles the scrolls. The oil in the suction gas is separated by changing directions and impinging on surfaces within the compressor and then draining back to the oil sump. Finally, the suction gas is drawn into the scroll assembly where it is compressed and discharged into the dome of the compressor. The dome of this compressor acts as a hot gas muffler which dampens the pulsations before the gas enters the discharge line. How the Scroll Compressor Trane Works General A 3-D compressor has two scrolls. The top scroll is fixed and the bottom scroll orbits. Each scroll has walls in a spiral shape that intermesh. Inlet - First Orbit As the bottom scroll orbits, two refrigerant gas pockets are formed and enclosed. Compression - Second Orbit The refrigerant gas is compressed as the volume is reduced closer to the centre of the scroll. Discharge - Third Orbit The gas is compressed further and discharged through a small port in the centre of the fixed scroll. Price: 1.000 Euro + TVA, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Rotor knives: 6 Blsdpfx Aeyr Ttmoqtep Stator knives: 2 Inlet cross-section approx. 519×316 Drive motor: 18.5 kW Pneumatic tilting device for upper housing section Without control cabinet and electrical wiring (can be provided for an additional charge). Spare parts and additional plant components are available.

Condition: ready for operation (used), Fanuc stator for A06B-1401-B105 AC spindle motor, serial number C189SB412, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bljdpozm D Atsfx Aqtjp