Used Straight Line Rip Saw for sale (32,636)

Year of construction: 1995, condition: used, In Good Condition Hnodjdq Uf Hopfx Adwjg

Year of construction: 2023, condition: new, MRS 300 is a multi-blade rip saw. Machine frame is cast-iron, all the main parts are enclosed, ensuring protection and perfect stability. Feeding unit is straight line caterpillar style, feeding with heavy guided chain. Chain blocks are special cast iron with heat treated and precision ground pins. Nickel-chrome steel saw srbor with 70 mm spindle. Locking mechanism is made with quick release sleeve system. Machine is on stock and can be delivered quickly! The price is valid for a version with motor power of 30 hp. FEATURES: - 3 sets of anti kickback fingers. Two at the top and one at the bottom. - powered lifting and lowering the pressure rollers - new style round fence bar support with quick shift long fence - automatic centralized lubrication system - automatic star-delta switch (slow speed start) and low voltage controls - C.E European guard and safety features Hjdpjf Dql Tjfx Adwsng - long fence for control of longer workpieces - Nominal voltage: 400 V (3-phase)

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bar. 3 G Hsdpfsw Hf T Nsx Adwjng

Condition: good (used), Year of construction: 1995, Longitudinal circular saw, Swiss manufacturer, with max. 5.1 m cutting length Hnodpfx Aswugihedwog with lamella carrier max. cutting width 450 mm max. cutting height 160 mm hydraulic feed motor

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw for HSS and carbide saw blades Hjdpeubbw Aofx Adwong Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced

Condition: like new (used), Year of construction: 1993, operating hours: 1,100 h, functionality: fully functional, Still a very nice rip saw with only 1100 operating hours, almost like new. Make: Irion, Type: HFS 170, built in 1993. Max. cutting length: 6200 mm. Max. cutting width: 600 mm. Max. cutting height: 170 mm. Hjdpfov T Rc Djx Adweng With digital width display. With laser.

Condition: good (used), Year of construction: 2011, beautiful rip saw with max. 8 m cutting length max. width 1.9 m Hnedewrb Ruspfx Adweg max. cutting height 160 mm motor 11 kW with laser for cutting joint display with integrated pressure beam

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Hnsdpoxw Rcusfx Adwog Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Hodpfotgvgpjx Adwong Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included. Hnedpfx Adegwqk Sswjg

Year of construction: 2011, condition: ready for operation (used), A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available. Hsdpfoup Ehiox Adweng

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line capacity 75,000 m3 timber per shift. Only one operator required. Lisker control for Ari/Kockums line and edging line as well. Hnsdpex Up A Rofx Adwog

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Leuco, saw blade type topline Ø 390 mm -Inner diameter: 35 mm -Number of teeth: 96 -Quantity: 2x saw blades included -Price: per piece Hodpfx Aog Dc Htodwong -Dimensions: Ø 390 x 3 mm -Weight: 2.2 kg/piece

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, type of input current: three-phase, input frequency: 50 Hz, NEW PRICE ONLY 79,000 EURO!!! Price valid only until January 30, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and outstanding panel saw, the HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage handling. The SAWTEQ B-400 is a HOMAG panel saw with automatic loading, capable of executing cuts at high speed. The efficient SAWTEQ B-400 is designed for high-volume panel processing and delivers top-quality, finished cuts. It stands out for its reliability, precision, high power, and fast operation. The saw we are offering is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly from the manufacturer to our premises. The HOMAG POLSKA Sp. z o.o. service team only carried out the initial startup; the machine has never been used since. In the industry, neither this model nor the Homag brand requires an introduction—Homag is widely regarded as the global leader in the production of state-of-the-art, high-quality equipment. Our unit is exceptionally well-equipped with virtually every option available. A similar panel saw in the basic version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended version, prepared for automatic storage and with additional options, costs around 190,000 EURO net (807,500 PLN net)*. Hnjdpfx Ajx Szvdedweg Key Benefits: - High throughput thanks to automatic loading and large saw blade projection - High efficiency with relatively compact space requirements - Designed for efficient material flow and precise logistics - Suitable for networked production environments We maintain direct contact and support from HOMAG for installation and commissioning at the buyer's location, if required. In our opinion, the discount we are offering—over 45% below the new price—makes this an extremely attractive proposition for anyone currently looking for a modern panel saw compatible with automatic storage, or for buyers not currently planning such an upgrade but who may wish to do so in the future. This equates to around 90,000 EURO net (approx. 400,000 PLN net)* in potential savings. The machine, of course, can operate without an automatic storage system. General sales information: - The device is BRAND NEW but manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The listing price does not include VAT (23% VAT for Polish buyers), which will be added to the invoice—please check our price presentation in the listing. - Single owner. *EUR price based on the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all Machineseeker users. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own numerous properties in Poland and operate as a real estate developer building houses and apartments in Warsaw (the capital of Poland). All machines in our listings are our property. We acquired them as part of settlements with our tenants in the furniture industry and are familiar with their history and condition, consistent with our descriptions. We remain in contact with manufacturers such as Homag, Otto Martin, OMC Machinery, and FANUM, who can provide additional support. Since we do not need these machines, our prices are very attractive—especially considering the machines are nearly new. We can assist with transport anywhere in Poland or the EU. You are welcome to inspect the machines before purchase. Kind regards.

Condition: new, Year of construction: 2014, functionality: fully functional, saw band length: 4,780 mm, Semi-automatic double mitre band saw for mitre cuts to the left and right up to 60°. Technical data: - Saw drive: 3.0 kW - Cutting speed: 20–120 m/min - Working height: approx. 760 mm - Saw blade dimensions: 4780x34x1.1 mm Cutting capacities: 90° Ø 350 or 510 x 350 mm 45° Ø 350 or 415 x 100 mm Hnsdpfsx U Augsx Adweg 60° Ø 270 or 280 x 100 mm

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Hnodpfxjtwy Ius Adweg Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Hnodpfxjiv R Hhj Adweg Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2011 Saw blade projection max. (0°): 72 mm Saw blade diameter max .: 350 mm Main saw motor: 14 kW Scorer aggregate Scorer saw blade diameter max .: 180 mm Scorer aggregate, manually adjustable Package height max. (0°): 60 mm Saw aggregate forward: up to 100 m / min Saw aggregate backward: up to 100 m / min Feeder: up to 120 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 6 pcs grip push clamp Regulation of clamp force at control desk stepless Number of stop jaw: 2 pcs Clamp opening: 82 mm Strip aligner before the pressure beam Air cushion tables: 3 pcs. 1800 x 600 mm Angular cutting device WSA Motor-driven cutting height adjustment for the main saw, infinately Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Formatting device Hjdpfok T Aw Sex Adwsng This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm Hodji Dylfspfx Adwsng − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: used, knife: HW WZ-Z72 flight circle (ø): 494 mm drilling: 30 mm Hjdpfx Adetddxrswong width: 3,7 mm material: steel Available: 2

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Hnjdpfxefg Ewzj Adweg Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min Hnedpfou Nigkjx Adwjg cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: new, The workline 510.350 DGH is a semi-automatic double mitre bandsaw in swivel frame design. Equipment details: - Double mitre 30° - 45° - 90° - 45° - 30°. - Hydraulic full stroke vice - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides Hnsdehg Nvyspfx Adwjg - Powerful drive motor with 3kW - Simple, easy to understand control system - Control panel in ergonomic position - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: - Microspraying device - Hydraulic belt tension indicator

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. Hjdpfx Adolwt Adjweng It’s also possible to roll the window drip cap on the machine in two steps.

Condition: used, knife: HW-Z72 Hjdotddxvepfx Adwsng flight circle (ø): 500 mm drilling: 30 mm width: 3,8 mm material: steel