Used Stud Welding for sale (5,812)

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Nedjt Awm Depfx Ah Rokw Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Year of construction: 2022, condition: new, Turntable Nedjgn Ecropfx Ah Rekw Load: 1.000kg (1.200kg horizontal) with a center of gravity of 200mm from the faceplate Faceplate diameter: 800mm with 4 T-slots Faceplate speed: 0.05-1.5rtm Torque face plate: 1,800Nm Tilt angle: 0-135 ° Welding current transmission: 800A Operation: Two-pedal foot switch and button on the switch cabinet

Condition: new, Year of construction: 2023, Hydraulic height adjustable rotary tilt table Maximum load: 1.000kg Faceplate diameter: 850 mm Speed of face plate: 0,05- 1,0 rpm length / width: 1.800mm / 1.450mm Height faceplate horizontal: 800mm - 1.275mm height faceplate vertical: 625mm - 1.100mm Operating devices: 2-pedal foot switch/ turn LEFT/ RIGHT hand-held remote control: Turn LEFT/RIGHT/STOP, speed controller (potentiometer) for stepless speed control, pushbutton tilt FORWARD/BACK, pushbutton lift UP/DOWN Operation at the control cabinet: Pushbutton "DEVICE ON Selector switch "MANUAL/FOOT OPERATION Nedpfsh T Dafox Ah Rjkw Main switch "ON/OFF

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Nsdpfjnqzt Asx Ah Rskw Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A Nksdpfx Asfxgp Ujh Row

Year of construction: 2020, condition: new, Hydraulically height-adjustable tilt and turn table Maximum load: 2.500kg Nkjdpfjd H Hzbox Ah Rjw faceplate diameter: 1.200 mm Stroke:1,050 mm

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Nksdpst Hfrcefx Ah Rjw Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 20,000 kg, total length: 4,750 mm, total width: 2,600 mm, type of input current: three-phase, rotary table diameter: 2,500 mm, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable turn/tilt table Maximum load: 20,000kg (permitted center of gravity 700mm) Torque: 30.000Nm Face plate diameter: 2,500 mm Height of faceplate: 1,326mm-2,641 hydraulic Height of 90° tilted face plate: 1,045mm-2,360mm Nkjdpfxjt Hgmus Ah Row Tilting range: 135° hydraulic Faceplate speed: 0.1-2 rpm electromotive Operation: manual remote control

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 300 A, welding current at 100% duty cycle: 250 A, welding current (min.): 25 A, welding current (max.): 350 A, Lorch MicorMig 350 – Synergic MIG/MAG Water-cooled 3 Months warranty Refurbished, tested, and ready-for-use Specifications: 350 AMP 380 Volt Synergic SpeedArc 2/4 Step 4 Roller drive Fixed programs Elektrode option Nodeyxpaqjpfx Ah Rskw Including: Welding torch, ground cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 10,000 mm, welding current at 60% duty cycle: 430 A, welding current at 100% duty cycle: 360 A, welding current (max.): 500 A, For sale: Kolarc XM500 500 AMP 400 Volt Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and 10 Meter interconnection hose. Nkodpfx Aeyxn Umeh Rsw Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Nodpst A A Aqofx Ah Rskw

Condition: used, Year of construction: 2011, machine/vehicle number: JP - 0160201, Motorized welding and tilting table with height adjustment Ref. No. 26069 Technical Data: - Max. load capacity in horizontal position: 15,000 kg Nkodpfxoywtt Se Ah Rew - Faceplate diameter: 1,800 mm - Faceplate motor-driven tiltable: 0 to 120° - Table height adjustable - Rotational movement electrically, steplessly adjustable: 0.04 to 0.80 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V / 5.5 + 7.5 kW - Minimum table height in horizontal position: approx. 1,700 mm - Intermediate table heights in horizontal position: approx. 1,900 + 2,100 mm - Maximum table height in horizontal position: approx. 2,300 mm - Handheld remote control - Required installation space: approx. W 2,100 x H 1,700 x D 2,400 mm - Weight: approx. 8,500 kg

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Nedpfx Aeh N Sd Uoh Rokw Short-circuit current: 22kA Welding current: 17.6kA Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: ready for operation (used), functionality: fully functional, M 452 DW universally applicable MIG/MAG welding machine, water-cooled with separate wire feed unit, extremely robust and reliable with excellent welding properties. Welding current range: 25 - 450 A Duty cycle: 450 A / 40% duty cycle 420 A / 60% duty cycle Nkodpfx Asyw N Sdoh Rsw 340 A / 100% duty cycle incl. 5 m intermediate hose package without torch, ground cable, or pressure regulator

Condition: ready for operation (used), functionality: fully functional, CH 350 Universal MIG/MAG welding machine, water-cooled with separate wire feeder, extremely robust and reliable with excellent welding characteristics. Welding current range: 50 - 350 A Duty cycle: A / 40% DC A / 60% DC A / 100% DC Incl. 5 m intermediate hose package without torch, earth cable, pressure regulator Nkedpfxoyw N N As Ah Rjw

Condition: ready for operation (used), functionality: fully functional, MIG 450 WDV universally applicable MIG/MAG welding machine, water-cooled with separate wire feeder case, highly robust and reliable with excellent welding properties. Welding current range: 50 - 450 A Duty cycle: 400 A / 40% DC 350 A / 60% DC 300 A / 100% DC Nsdpfx Aeyw N Ileh Rjkw incl. 5 m intermediate hose package without torch, ground cable, or pressure regulator

Condition: ready for operation (used), functionality: fully functional, MIG 450 WDV universally applicable MIG/MAG welding machine, water-cooled with separate wire feeder case, highly robust and reliable with excellent welding properties. Welding current range: 50 - 450 A Duty cycle: 400 A / 40% DC 350 A / 60% DC 300 A / 100% DC incl. 5 m intermediate hose package without torch, ground cable, or pressure regulator Njdpjyw N Edefx Ah Rokw

Condition: ready for operation (used), functionality: fully functional, MIG 450 WDV universally applicable MIG/MAG welding machine, Nksdpoyw Nz Sjfx Ah Row water-cooled with separate wire feeder case, highly robust and reliable with excellent welding properties. Welding current range: 50 - 450 A Duty cycle: 400 A / 40% DC 350 A / 60% DC 300 A / 100% DC incl. 5 m intermediate hose package without torch, ground cable, or pressure regulator

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. • 6-axis welding robot Additional equipment • Welding source: 350A (SP-Mag / Hyper Dippulse) Nkedpoyfd N Eefx Ah Rsw • Welding gun: VWP 316/351/95-3 • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Impaero, 3.1 General Description of the Basic Unit The Impaero is an air handling unit that refreshes indoor air and provides energy-efficient heating and/or cooling. The purpose of the Impaero is to create an optimal indoor climate in commercial spaces with minimal energy consumption. The Impaero is a modular system. Depending on customer requirements, various modules can be added to expand the functionality of the Impaero. Nkodjyxbzmspfx Ah Rjw

Condition: ready for operation (used), throat depth: 550 mm, Output: 25 kVA Design size: 550 mm Nksdeyk S Utjpfx Ah Rjw

Condition: used, Year of construction: 1987, volume capacity / length / mm Nsdpfx Asyrt A Ush Rskw height / mm

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044 Nkjdsxxkzmspfx Ah Rjw

Condition: good (used), Year of construction: 2018, overall weight: 1,000 kg, volume flow: 2,000 m³/h, Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filter Technology Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction / Filtration System Airflow rate: 2000 m³/h Njdpjyrndtsfx Ah Rekw Weight: 1000 kg Control unit: Herding MP 12 Filter cleaning: Pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: present Quantity: 2

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Njdjv Nrfxjpfx Ah Rokw Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.