Used Stunning Tongs for sale (141)

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, rectangular tongs, clamps, clamping tongs -Manufacturer: Siegert, rectangular pliers type GZ Dkjdpfx Aelg H I Iohxju -Grip range: 20 to 60 mm -Load capacity: 500 kg -Number: 1x gripper available -Price per piece -Dimension: 500/100/H350 mm -Own weight: 17 kg/pc.

Year of construction: 2000, condition: used, Line composed of: CP110-1 Nailer tong turner 5 meter heel turner module marker module corner cutter module Dkodpfx Aek Nfnbshxju pallet stacker 5 meter board

Condition: new, Year of construction: 2024, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors Dkjdpfx Ahed Nm Siexsu + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg Dkjdeu R Sxxjpfx Ahxeu - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h Djdpfx Aevm N Dtjhxsku New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: used, _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Dksdpfx Aewf Ti Ajhxeu Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW Dkedpfxelpi Tqe Ahxou -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Condition: used, mileage: 67,204 km, power: 338 kW (459.55 HP), first registration: 06/2019, overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, crane, * Iveco AD260 6x2/4 with 460hp flatbed Dsdpfsn E Sx Sjx Ahxsku * Foldable crane at the rear, high seat, radio remote control * Type Atlas 173.E3 hydraulic. 3-way extension * Pallet tongs + pallet forks * Rotary servo * Steered trailing axle * Payload 11,630kg * Automatic transmission * Roof hatch * Automatic climate control * Electric windows + mirrors * Rear differential lock * Cruise control * Rear and trailing axle air-suspended * Sun visor * Disc brakes * Front tires 385/65R22.5 85% * Rear tires 315/80E22.5 80% * Rear tires 385/65R22.5 90% * Storage boxes left and right under the bed * Intarder * Turning camera right * and much more !!! Errors, changes and prior sale reserved !!!

Condition: new, Year of construction: 2025, operating hours: 8 h, One machine - ready produced Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Dkedpfexfwdox Ahxju Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, mileage: 9,77,000 km, power: 294 kW (399.73 HP), overall weight: 26,000 kg, fuel type: diesel, color: yellow, axle configuration: 3 axles, brakes: retarder, emission class: euro5, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 1,000 mm, Year of construction: 2012, first registration: 08/2012, next inspection (TÜV): 05/2025, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Very well-maintained MAN TGS 26.400 construction materials truck with Atlas 220.2 loading crane and pallet tongs Special equipment: Trailer coupling: Rockinger 400 G 150 A, aerial car phone, work lights (2) on cab roof, exterior mirrors and wide-angle mirror electr. adjustable and heatable, wide-angle mirror with electr. maneuvering aid, battery 225 Ah, curb mirror right electr. adjustable and heatable, bolted bridge mounting bracket, rear axle differential lock, aluminum air reservoir, pressure sensor for air bags, ETA automatic fuse, cab: with air suspension, driver's seat comfort, air-sprung and heated, with lumbar support and shoulder adjustment, remote control central locking, flame-start system, transmission 12-speed - type: ZF 12 AS, Tipmatic, pneumatic transmission shift lock, high-load roll stabilization, automatic air conditioning, fuel tank: combi tank - 480 ltr. Diesel + 75 liters urea solution (AdBlue), Steering wheel with multifunction, LM rims 9.00x22.5 (ALCOA matt on 1st rear axle), LM rims 9.00x22.5 (ALCOA matt on 1st front axle), LM rims 9.00x22.5 (ALCOA matt on 2nd rear axle), heated air dryer, Eberspächer D4S auxiliary air heater, NAS/10C power take-off without flange, spare wheel LM rim 9.00x22.5 ALCOA matt, Retarder, Seat cover/upholstery: comfort quality, Exterior sun visor, Side window sunblind, Driver and passenger door, Socket for cab 12V and 24V, Fleet management system control module, Reinforced front axle shock absorbers, Preparation for engine start/stop system at frame end, Additional high beam/fog lights with cornering light Further equipment: Axle configuration: 6x2, Approach/front mirror, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Audio system: MAN basic Line radio (radio / CD), MAN-Tronic on-board computer, MAN-Brakematic electronic braking system, EURO 5 engine, Cab: L, Suspension: leaf / air, Electric windows, Tinted windscreen, Generator 28 V 80 A, Mechanical lifting roof, Body/structure: Chassis, rocker arm - brake EVB, fuel filter heated, air intake raised, air compressor 1-cyl. 360 ccm, engine 10.5 ltr. - 294 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, side guard, tinted side windows rear, sun protection roller blind for windscreen, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, tinted door windows, underride guard rear, underride guard front, viscous fan, front axle VOK-09 cranked, central locking, gross vehicle weight 26.00 t Tire condition: front axle approx. 80% rear axle approx. 60% The vehicle can also be sold complete with trailer. The price of the trailer is 5.000,--¤ net For questions regarding the equipment please call. Subject to errors and prior sale! Dkedpsvm R Rusfx Ahxju

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 Dkodovm N Dgspfx Ahxsu * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Year of construction: 1998, condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard Dedpfx Ahjlyvcqoxsku -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Price per piece -Dimension: 1000/510/H950 mm -Own weight: 59 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2024, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Dkodpfxed Su Hxs Ahxeu Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm Dedolzmxgopfx Ahxjku -Own weight: 36 kg

Condition: new, Year of construction: 2025, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density Djdpfxoffh Atj Ahxeku *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Gripping width: 80 to 300 mm Dkedpelf Tqqefx Ahxsu -Load capacity: 1.5 tons -Number: 2x gripper available -Price per piece -Dimension: 700/220/H500 mm -Own weight: 25 kg/pc.

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (smaller than 18 mm) - Material must be pure, ash content less than 1% ATRO Attention with: sand, stones, and minerals - It is pressed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options at extra charge: Plant construction / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - All kinds of control system connections - Semi-automatic packaging technology + 24h operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *details after test Functionality: The machine has a silo with agitator on top. In each of the 4 corners of the storage silo, there is a vertical screw which compacts the material downwards into the pressing chamber. The machine works with two cylinders, each pressing in two directions (either when moving the cylinder forward or backward). This creates 4 briquette outlets with 6 individual briquettes each. *ideal for automatic feeding of the heating boiler Format Ø 30 mm Throughput of up to max. 310 kg/h Motor: 15 kW Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format allows firing of industrial furnaces using screw feed Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality & density For automatic feeding into industrial furnaces Small to medium quantities of wood chips generated in various processing industries (especially wood, biomass, etc.) can be optimally compressed. The small Ø 30mm format offers an attractive alternative. Unlike our conventional briquettes, these can be fed automatically into industrial furnaces. Dsdpfx Ahsfbb Arexeku In addition to wood, various other materials (various biomass & agricultural residues) can be processed without issue.

Year of construction: 1985, condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs -Manufacturer: Tecna, spot welding machine: Type4161 Dksdpfxek Aubxe Ahxeu -Rated power: 31 kVA -Operation: by foot pedal -Dimensions: 780/250/H1500 mm -Weight: about 130 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU 10 with swiveling support ring -Clamping range: 0 - 40 mm -Load capacity: 0.3-3 t -Dimensions: 230/90/H380 mm Dksdpfskm Rnkox Ahxeu -Weight: 15 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Djdpfokm Rnnjx Ahxeku -Manufacturer: ip, safety lifting clamp type IPUN with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 9 t -Number: 7x clamps available -Price per piece -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc.

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPUNZ with swiveling support ring -Clamp range: 0-32 mm -Load capacity: 6 t -Number: 23x clamps available -Price per piece Djdpfx Ahokm Rnvoxjku -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Gripping diameter: 2 ranges adjustable, see photos -Dimension: 750/500/H1120 mm Dkjdpfx Aholyvc Aoxou -Own weight: 126 kg

Year of construction: 2002, condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Greifzug, Corso beam clamp type LT-3B -Flange width: 80 - 320 mm Dkedpfx Ajvgu Nbohxou -Load capacity: 3 t -Dimensions: 380/115/H375 mm -Weight: 11 kg

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs -Pipe grab: unfortunately without type designation -Pipe diameter: 610 to 900 mm Dsdpfxsix Ay Ts Ahxeku -Dimension: 1320/670/H1700 mm -Own weight: 287 kg

Year of construction: 2000, condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK -Grip width: 1-75 mm -Load capacity: 2500 kg Djdpfx Ajvxruxohxjku -Dimensions: 300/150/H390 mm -Weight: 17 kg