Used Swing Beam Shear for sale (9,018)

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg Gusdpfx Aajxgdlnjboh

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Click on the link below to see a video of the machine running. Godpfx Aexgft Hjabsuh

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Gjdsxld Ruopfx Aabsuh Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: used, Year of construction: 1990, Hydraulic Guillotine Shear Manufactured by ATLANTIC, Type ATS 3012 Year of Manufacture: 1990 Technical Specifications Manufactured by ATLANTIC Type ATS 3012 Year of Manufacture: 1990 Sheet Size: 3000 x 12 mm Cutting Angle Adjustment: 0.5 – 3 degrees Gedowif I Ejpfx Aabouh Number of Hold-Down Clamps: 18 Length of Angle Stop: 1000 mm Working Height: 900 mm Motor Power: 22.5 kW Dimensions: Approx. L 4.20 x W 2.00 x H 2.20 m Weight: Approx. 8 t Features • Angle Stop • Manual Cutting Gap Adjustment • Automatic Cutting Angle Adjustment • Motorized Backgauge with Fine Adjustment All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2020, WSM SCS6 Demolition/Scrap Shear, used, 2020, 620 kg Manufacturer: WSM Abbruchtechnik Model: SCS6 Serial number: 918931 Year of manufacture: 2020 Weight: approx. 620 kg Oil requirement: 80-100 l/min Working pressure: approx. 330 bar Noise emission: 121 dB Condition: Gsdexlunwjpfx Aabsuh The unit is fully functional, all hydraulic cylinders are tight, wear blades are intact or partially renewed, no major damage to the housing, recently serviced. Photos and inspection available.

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg Guodpfepwgr Hox Aabeh with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: new, Year of construction: 2025, 3050 mm 13,0 mm Guodpfxewp Tdue Aaboh 0,5-2,5 ° 1000 mm work height max. 900 mm

Condition: used, machine/vehicle number: 005108, undefinedPosition 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Godpfx Aaowuck Isbouh

Condition: used, Good day, Gujdpfx Aastk N E Aobeh We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Do you have any questions? Then we are at your disposal.

Condition: good (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 68060, FOR SALE HACO SHEAR TS 3012 3 METERS BY 12 MM Godpfjw R Azdex Aabsuh YEAR 1999

Condition: used, functionality: fully functional, Looking for a reliable and solid O-beam for your scaffolding construction? This used Layher AR O-beam of 0.73 meters is a compact and sturdy connecting beam, ideal for bridging short distances within your Layher Allround system. ✔ Original Layher Allround ✔ Length: 0.73 meters ✔ Material: Galvanized steel - durable and weatherproof ✔ Status: Used, but in good functional condition Guedpfew Ei Sasx Aabeh ✔ Perfect for renovation projects, maintenance or as an addition to existing scaffolding This O-beam is easy to assemble thanks to the smart Layher coupling system. Despite previous use, it is technically sound and can be used immediately on the construction site. Please note: Used material may show signs of use, but is always checked for safety and quality. Photo is an example photo

Year of construction: 2006, condition: excellent (used), machine/vehicle number: W144, Technical data: 1 Demag KBK column slewing crane NL 50 KG Payload at full radius 50 KG payload Height: approx. 3.8m, UK boom: approx. 3.3m Projection: approx. 5m, hook height: approx. 2.95 m Guedpsp Artdefx Aaboh Weight completely approx. 300KG with 125Kg steel ST chain hoist with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Test book is available Very good condition, see pictures Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: new, Year of construction: 2025, 3050 mm 06,0 mm 0,5-3,0 ° Gusdpfjwp Tdhex Aabsh 1000 mm

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Gujdpfx Aswuucijabjh Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: used, Sheet lifter - Sheet clamp - Universal lifter Carrying clamp, beam clamp, lifting tackle for horizontal sheet transport Lifting gear for horizontal sheet transport DOLEZYCH type Dolast K15 Year of manufacture: 1997 Load capacity per clamp: 3 t Maximum load capacity: 6 t (for the twin lifting tackle) Clamping range: 0–51 mm Sheet thickness: 4–50 mm Wire rope length: 1.5 metres - Two-leg wire rope sling with eye - 2 lifting clamps included Own weight approx. 45 kg The lifting gear is suitable for lifting single steel plates or bundled sheet packs. Gusdpfxexciwzs Aabeh Price quoted per lifting gear, 2 units available.

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: documentation/manual, LVD Hydraulic Shears Type HSL40/12.7 Gsdpfxowp Rxcj Aabouh Year 12: 1991 4 mm by 12 mm

Condition: as good as new (ex-display), Guillotine Shear WEIKA 3200x10mm / New - Unused - CE marking - Showroom machine / NEW - Unused Gedpoxk Uz Uofx Aabouh - Cutting length 3200mm - Max. cutting thickness - steel 10mm - Max. cutting thickness - stainless steel 8mm - Max. cutting thickness - aluminium 12mm - Digital back gauge - Footswitch - Light barrier / right-left - Front support with ball rollers - Drive power 11 kW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000kg Errors and omissions excepted.

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Godpfxsr Igtyj Aabjuh Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: good (used), Working length:1040 mm Sheet thickness: 4 mm cutting angle: 1,6 °. backgauge: 10 - 750 mm number of hold-downs: 1 (13000N) side stop: 70 - 850 mm Traversing speed: 90 mm/s throat (WxH): 20 x 125 mm Weight, approx.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Test cut: Very good Godpfx Aaei Ar Igsbsuh - Manual backgauge 750 mm - foot operation - Emergency stop pushbutton - operating instructions - Table extension

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? Guedsxm Spzjpfx Aabeh A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm Gujdpfx Aet Ac D Ujabsh - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg Gusdpfer Igtkox Aaboh including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, Year of construction: 1962, Working length: 1020 mm Gedpfx Asrh D Ttoabsuh Sheet capacity max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm

Condition: used, Hydraulic guillotine shears FASTI Type 509 - 25/4 Machine no. No. 5418 Year of construction 1991 Gujdpfot Apumjx Aabjh Cutting length 2535 mm Cutting thickness 4 mm Backgauge 5-1000 mm (controlled) Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 7.5 kW Mains connection 400 Volt, 50 Hz - Back gauge with positioning control ELGO ELECTRIC type 85 - Sheet holding device under the back gauge - Manual cutting gap adjustment with dial gauge display right and left - stepless cutting length adjustment - Hydraulic cutting angle adjustment via hand pump - front angle stop left 1300 mm - 14 sheet hold-down devices - electric foot switch - very solid and torsion-resistant welded construction - 1 set of original FASTI replacement blades (4 pieces, presumably new and unused) space requirement L x W x H 3100 x 2350 x 1700 mm weight 3500 kg good condition

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions Gederz Tutepfx Aabeuh - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition