Used Swing Gate for sale (3,275)

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Iedpfx Agoz S Nc Ueyobc Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: excellent (used), Year of construction: 2001, spindle bore: 150 mm, spindle motor power: 95,000 W, total height: 3,800 mm, total length: 16,000 mm, total width: 5,000 mm, overall weight: 80,000 kg, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Ibsdpfx Aoz Sy Twsgyjc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, maximum load weight: 33,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2026, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Stock no. 5421 Approx. 52 m³ Benalu grain tipper trailer made entirely of aluminum / combination door / 5.5 tons EMPTY / FOR RENT! ----* Manufacturer: Benalu * Type: Agriliner 9500 * First registration: 09/2024 * Gross vehicle weight: 39,000 kg * Unladen weight according to vehicle registration document: 5,560 kg * Payload: 33,400 kg * Axles: 3 x Jost, with 1st axle as a lift axle / disc brakes * Suspension: Air suspension with raising and lowering function * Tires: 385/65R 22.5 on aluminum rims * Color: Chassis and tipper body in natural aluminum / tarpaulin blue * EBS Wabco * TÜV (technical inspection): 09/2026 Iedpfx Aszdm S Ejgysbc * Volume: approx. 52 m³ (9.50 m long x 2.41 m wide x 2.20 m high) * Combination door (hinged door and swing gate) * 2 x grain slides * Grain hopper with dust bag * 3 cross members * Tarpaulin with tension straps * Operating platform at the front with access on the left and right * 1st axle is a lift axle with start-up assistance * Automatic lowering when tipping * Aluminum support legs (full load support) * 2 x LED work lights * 2 x LED reversing lights * LED tail lights * 3.5 m aluminum ladder * Foldable underrun protection * Individual fenders * Loading pressure gauge * TPMS * 1st owner Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 29,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 54 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5696 New vehicle! Available for rent, purchase, or lease with an option to buy! 54 m³ Kempf grain tipper semi-trailer with a discharge gate / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Type: SKM 36/3 AK - High-performance discharge gate tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00 m x 2.43 m wide x 2.20 m high) * Total weight: 36,000 kg * Unladen weight according to manufacturer: 7,000 kg * Payload: approx. 29,000 kg * Axles: 3x SAF axles / 1st axle can be lifted / disc brakes * Tires: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with raising and lowering / quick release * EBS Wabco * Combination door (swinging + split door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Kempf 400 steel discharge gate with a throughput rate of 30-40 m³/h, with control panel on the rear right * 2x partitions with 3 locking positions * Open hose storage on the right * 1x grain slide with hopper * 1x vibrator * Saddle height of 1,170 mm - 1,230 mm * 1x approx. 4.00 m ladder on the left * 1x water tank on the right * 1x air connection on the rear left * 2x toolboxes on the left * Individual mudguards * Aluminum outrigger supports (full load supports) * Tarpaulin with central locking * Operating platform at the front with access ladder on the left * Folding tarpaulin supports * 3x crossbeams * Sight glass at the rear right * Loading pressure gauge * Shovel and broom holder * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights New vehicle! Also available for RENT! Ibsdjy U Dlyepfx Agysc Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, errors may have occurred in the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn Ibodpfxeyz Db Ue Agyoc - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 109238, Technical characteristics: Work Area - Chuck diameter: 260 mm - Maximum workpiece weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5 to 6 seconds - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Motor output at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Tool Holder with Driven Tools - Toolholders with cylindrical shank according to DIN 69880: 12 positions – BMT65 - Number of positions: 12 - Maximum tool length including holder: 200 mm - Maximum speed: 6,000 rpm - Maximum torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Dimensions - Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm - Weight: 9,000 kg Main Features and Capabilities: - Vertical design for optimal chip removal and easy workpiece loading/unloading - CNC control: GE Fanuc FS 32i B - High positioning accuracy on X and Z axes: ±0.001 mm (Heidenhain linear scales) - Main spindle: High power output and wide speed range - In-process measurement: Marposs T25 measuring probe - Automated loading/unloading: EMAG O-Type. Parts are loaded and unloaded via integrated automation - Driven tool capability extends machining operations to drilling and milling - Chip conveyor, coolant unit, switchable double cartridge filter, high-pressure pump (15 bar) Iodpexxkgpofx Agyjbc - Tool life monitoring with sister tool management - Completely enclosed work area with workstation lighting - Documentation: Electronic version available; printed version incomplete Machine status: NOT WORKING - Requires replacement of hydraulic actuator and electrical motor - Live tool motor needs attention

Condition: used, mileage: 1,001 km, first registration: 01/2018, overall weight: 7,800 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 6 m³, loading space length: 3,400 mm, loading space width: 2,000 mm, loading space height: 450 mm, Year of construction: 2018, Vehicle location: Bovenden, steel body, lashing eyes, swing gates. Body: 3-way tipper body with aluminium extension side panels (450mm) & electric hydraulic pump, approx. 6m³. Suitable for example for Mercedes Sprinter or Iveco Daily! TOP condition, only mounted on truck for approx. 16,000km! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Ijdsyuy N Tepfx Agyobc

Condition: used, Year of construction: 1998, color: blue, loading space width: 2,470 mm, loading space length: 4,000 mm, loading space height: 300 mm, mileage: 1,001 km, first registration: 01/1998, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, lashing eyes, swing-out gates, crane behind the building, emergency stop, foldable, elevated platform, 2-point hydraulic support, 2x hydraulic extensions. Superstructure: Roll-off container with aluminum side walls & Hiab 102-S-2 crane with elevated platform, pre-wiring for grapple control! Ibodpfsi Rmfnox Agyjc Hook height approx. 1380mm! Load chart: 4m-2700kg, 7.6m-1380kg! Suitable vehicle -84457- available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: Iedpoq I Nxdefx Agysbc 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Condition: new, Storage platform accessories (stairs, transfer station, barrier gate, folding door) – new: Ibsdpfjfcrwyox Agyoc Barrier gate: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: width 1500 mm, 2000 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. A customized offer tailored to your specific needs is a matter of course for us. Further accessories available, such as: Impact protection corners, ram protection walls, push-through guards, chipboard, grating, deep shelf profiles. Shipping: Please inquire about freight costs, specifying your postal code and location, as well as the desired quantity of items. Further service offerings: Shelving installation, maintenance, expansion, modification, and repair. Dismantling, PURCHASE, recycling, and disposal.

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Ibedpfx Aornkhyegyec Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Ibedpfxoy D Nkte Agyec Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes MAZAK QUICK TURN SMART 100 S Machine type: CNC Horizontal Turning Machine Isdpfx Ajz Hdx Sjgyebc Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: used, mileage: 34 km, power: 92 kW (125.09 HP), first registration: 10/2026, fuel type: gasoline, overall weight: 2,140 kg, color: black, gearing type: automatic, number of seats: 5, total length: 4,343 mm, total width: 1,813 mm, total height: 1,841 mm, loading space length: 808 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 4134.NW26.TM76050 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Tow hitch, fixed * Driver Assistance Pack 2: Ford Audio with 8-inch touchscreen and Ford SYNC 4 - Pre-Collision Assist, camera-based - Automatic High Beam - Lane Keeping Assist including Lane Departure Warning - Cruise Control - Intelligent Speed Limiter with Speed Limit Display - Wrong-Way Driving Alert - Traffic Sign Recognition - Front and rear parking sensors - Rear view camera - Electric front windows with quick up/down function for driver and passenger * Halogen headlights with LED daytime running lights, including black headlight surrounds * Wheels: Steel wheels 6 J x 15 with 195/65 R15 all-season tires, suitable for winter conditions * Side windows from the 2nd row of seats and rear window, tinted * Fixed side windows, third row, left and right * Winter Pack 2 (Van): Heated steering wheel - Heated windshield - Automatically dimming interior mirror - Seat Pack 5: - Driver's seat, 6-way adjustable and heated - Passenger's seat, 4-way adjustable and heated - Driver's seat lumbar support - Driver's seat armrest - Removable mesh bulkhead FURTHER EQUIPMENT * 12-volt socket in the passenger compartment * ABS * Airbag, passenger side - with airbag deactivation function - Airbag, driver side - Head/shoulder airbags - right and left - Side airbags, right and left * Exterior mirrors, electrically adjustable and heated, in plastic * On-board computer with fuel consumption and mileage information (e.g., remaining range) as well as outside temperature display * Double-wing tailgate * ESP * Vehicle modem 5G * Remote control for central locking with two keys, folding * Ford Easy Fuel - comfort fuel filler cap and misfuelling protection * FordPass Connect * Glove compartment with lid * Rear window, fixed - Heated rear window - Rear window wiper * Rear swing door * Interior lighting with delay function with reading lamps in the front * Air conditioning, manual Ibjdpszp Avwjfx Agysc * Headrests (2) height adjustable * Continuous rear floor mat * Steering wheel: Audio controls on the steering wheel * Center console, large * Fog lights * Emergency brake light - pulsating illumination of the brake lights during hard braking * Emergency Call Assistant * Gasoline particulate filter (OPF) * Upholstery: Fabric City * Tire repair kit * Tire pressure monitoring system * Windshield wiper intermittent function * Sliding door, right and left * Side windows, 2nd row, with hinged window left and right * Power steering * Seat belts - Seat belt tensioners and force limiters in the front - Warning system for unbuckled seat belts for driver and passenger * Seats: Rear seat back foldable, split 40:60 * Sun visors without mirror * Start-Stop system * Daytime running lights * Carpet floor mats, front * Traction control * Bulkhead: Folding mesh bulkhead * Immobilizer * Central locking with remote control ... and more ----First owner. German version. Errors and prior sale excepted. 2 years factory warranty from registration (can be extended on request). We will gladly accept your vehicle as part of the deal. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you! Since a deviation of the vehicle from the above description cannot be ruled out despite existing checks, we would like to point out that the vehicle description only serves to generally identify the vehicle and does not constitute a guarantee in terms of contract law.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Isdpfxjz R Nlzs Agyjbc

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Ijdpfx Agsz R Nl Ujyebc

Condition: new, empty load weight: 3,280 kg, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ibodpfx Agsz Stl Hoysc

Condition: new, functionality: fully functional, power: 8.09 kW (11.00 HP), color: orange, overall weight: 1,000 kg, operating hours: 1 h, OFFER!! Old price: €8,925 gross Now: €8,8508 gross! (We also offer the larger VIP 12 mini excavator with a 3-cylinder KUBOTA engine and a gross weight of 1,200 kg – now at a special price of €11,300 gross!) Mini Excavator VIP10 Articulated Boom - Professional and durable. The VIP10 RS model is the perfect equipment for the most demanding construction, electrical, plumbing, repair, and service companies in similar industries. The VIP10 RS model is also equipped with extendable tracks and a pivoting boom, making working in tight spaces much easier. We also guarantee after-warranty service. Mini excavators are manufactured on the basis of and under the supervision of European technicians. The equipment is built on a strong structure and can operate in all conditions. BUCKET: (3 buckets are included in the price) - 300 mm - 500 mm - 800 mm We also have: - Swivel bucket - Auger - Grab - Ripper tooth - Rake - Quick coupler - Demolition hammer TECHNICAL DATA: - Weight: 1,000 kg - Digging depth: 1,568 mm - Width: approximately adjustable (800 mm - 954 mm) - Engine: Koop - Number of cylinders: 1 cylinder - Fuel: Diesel Power: 8 kW / 11 HP - Rotation speed: 10.5 rpm - Gradeability: 30° - Pump type: Gear pump - Pressure: 16 MPa - Oil flow: 16.6 l/min - Color: yellow/orange DIMENSIONS: - Wheelbase: 914 mm - Track length: 1234 mm - Upper chassis clearance: 453 mm - Counterweight turning radius: 660 mm - Chassis width: 954/800 mm - Track width: 180 mm - Transport length: 2850 mm - Seat-to-ground height: 1525 mm - Overall height: 2211 mm - Left arm swing: 363 mm Ibedpjvzxl Ajfx Agyec - Right arm swing: 325 mm WORKING RANGE: Ground digging radius: 3039 mm Digging radius: 3136 mm Max. digging depth: 1568 mm Max. digging height: 2646 mm Max. unloading height: 1876 mm Maximum vertical digging depth: 1377 mm Raised blade height: 141 mm Lowering depth Dozer blade: 200 mm - 3-circuit control system for e.g., drill - hammer operation, etc. - LED work lights PRICE: €7,150 net €8,508.5 gross - INCLUDES 3 excavator buckets (300, 500, 800) - For machines regularly serviced by us, we EXTEND the WARRANTY to TWO YEARS - FREE 12-MONTH WARRANTY - after this period, we offer all original parts if needed! - FREE delivery within a 200 km radius - Sales possible WITHOUT TAX (only with VAT number) - FINANCING available - We are always at your disposal! KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the headquarters of Kingway in Germany. We have a huge selection of machines in stock, with around 100 available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also offer our customers access to all spare parts and mobile service. KINGWAY GERMANY Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), fuel type: diesel, fuel tank capacity: 14 l, color: orange, overall weight: 1,400 kg, emission class: euro5, shovel volume: 0.03 m³, operating hours: 1 h, Equipment: pallet forks, rubber tracks, standard shovel, Mini Excavator VIP14 on Rubber Tracks The modern mini excavator VIP14 is a professional and durable machine. The VIP14 model is the ideal machine for demanding construction, electrical, plumbing, renovation companies as well as service providers in similar sectors. The VIP14 is also equipped with a swing arm, which makes work on tight construction sites significantly easier. We also offer reliable customer service after the purchase. The mini excavators are manufactured under the supervision of European technicians. The machine is built on a robust frame and can be used under all conditions. TECHNICAL DATA: Model: VIP14 Own weight: 1400 kg Bucket volume (3 buckets in set): 0.04 m³ Engine: LAIDONG Engine power: 18.8 kW Number of cylinders: 3 Oil cooler: YES Swing arm: YES Extendable tracks: NO Max. climbing ability: 58 % Pump type: gear pump Hydraulic pressure: 20 MPa Hydraulic flow: 36 l/min Max. travel speed: 2.5 km/h Platform rotation speed: 12–13 rpm Bucket digging force: 16 kN Arm digging force: 12.5 kN Ground pressure: 23 kPa Fuel tank: 14.5 l Hydraulic tank: 15 l Engine oil volume: 3.2 l Support rollers (per side): 3 DIMENSIONS: Length: 3319 mm Width: 1100 mm Height: 2292 mm Blade width: 1100 mm Blade height: 220 mm Track contact surface: 1190 mm Iedpfx Agjvznl Ejyjbc Track width: 230 mm Ground clearance: 380 mm Bucket width (standard): 400 mm Total track length: 1503 mm Track model: 230x72x45 WORKING AREA: Max. digging depth: 2258 / 2495 mm (with quick coupler) Max. digging radius: 3417 mm Max. digging height: 2840 mm FEATURES AND ADVANTAGES OF THE PRODUCT - Special design to separate engine compartment and cooling system, and reinforced fan for improved cooling efficiency - Hydraulic components from renowned brands for stable and reliable performance - Dual fuel filter ensures high fuel purity and effective engine protection - Extended hydraulic system enables connection of various attachments - Comfortable operator cabin with wide, clear field of view facilitates work - Korean joystick for precise and pleasant control Versatile applications: gardening, orchards, agriculture, basement renovations, waste transport in coal processing plants, paper industry, etc. – replaces the work of 4–5 people PRICE: €11,008.4 net €13,100 gross

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: Mori Seiki NZX 2000 / 800 SY2 Control: Fanuc 31i A Year: 2012 SPECIFICATIONS Turningdiameter: 200 mm Max. swing over bed: 800 mm Max. turning length: 810 mm Spindle bore: 73 mm Bar capacity: 65 mm Main Spindle Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Subspindle Ibjdez Rl Dxspfx Agyjc Max. revolution: 5.000 rpm Spindle power: 25 / 22 kW Torque: 358 Nm Bar capacity: 65 mm Spindle nose: A2-6 C-Axis: 0,001° Amount of turrets: 2 Tool capacity: 16 + 16 Driven Tools: 16 + 16 Tool: BMT32 revolution driven tools: 12.000 Y-Axis: 110 mm Req. space (LxBxH): 5.120 x 2.721 m Machine weight: 8.500 kg Equipment Chip conveyor Partscatcher Internal cooling: 70 bar cooling system: Knoll Short Bar Loader: Irco Breuning – ILS MUK 7016 mit Spindelverlängerung Toolholders

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Ijdpfxexx Tigj Agyjbc Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: new, empty load weight: 3,140 kg, maximum load weight: 7,360 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, front panel foldable for overloading, automatic tailgate opening when tipping backwards, sidewalls swinging and fold-down, central locking system for side and rear drop sides, sideboards with spring-assisted relief, platform floor made of 4 mm fine-grain steel, 8 heavy-duty lashing rings recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, infinitely height-adjustable drawbar, removable rear stakes, gearbox support winch with load and quick shift, front-mounted, chassis-integrated storage compartment for two aluminium loading ramps, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Ibjdpsz Sl N Esfx Agyec

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable suspension, clamp bracket -Cable holder: Cable suspension for rail system or similar -Type: Round 10-22 mm -Number: 41x holders available -Price: per piece, minimum order 5 pieces Ijdpfx Agjwq Hx Ioysbc -Dimensions: 230/70/55 mm -Weight: 0.2 kg/piece

Condition: new, Brand-new electric actuator from the renowned German company AUMA. Professional device designed for industrial automation, operation of sluice gates, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 protection rating. Drive nameplate data: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection rating: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Motor nameplate data: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Duty type: S4 – 25% ED 1200 c/h • Protection rating: IP67 • Motor speed: 1400 rpm • Thermal protection: TH Ibsdsz Sm A Hjpfx Agyec • Insulation class: F Applications: • Industrial automation • Industrial fittings • Sluice gates and dampers • Water supply installations • Power engineering • Technological systems Condition: new / warehouse The price is for one piece.

Condition: used, Kuka Kuka robot with control unit Robot VKR 16-2 R1610 Control unit VKRC4-SC5 Kuka smartPAD handheld programming device Robot comes from the school and research department Hour counter: 226.25 Axis data: Range of motion A1 ±185 ° A2 -185 ° / 65 ° A3 -138 ° / 175 ° Iodpfjzdiudjx Agysbc A4 ±350 ° A5 ±130 ° A6 ±350 ° Speed at rated load A1 200 °/s A2 175 °/s A3 190 °/s A4 430 °/s A5 430 °/s A6 630 °/s Technical data: Maximum reach 1612 mm Maximum payload 20 kg Rated payload 16 kg Rated additional load carousel / swing / arm 0 kg / 0 kg / 10 kg Positional repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Mounting position Floor; Ceiling; Wall; Any angle Footprint 430.5 mm x 370 mm Weight approx. 245 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.