Used Swing Gate for sale (3,340)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 6,250messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Cjdpfx Ajh Talzehkegw Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 4120sheet thickness: 13,0total power requirements: 30weight approx.: 16750messurements (LxWxH): 4930x3160x2100 Cjdjd Eqrdepfx Ahksgw

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min Cgsdou Uwyyspfx Ahkew - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: new, sheet length: 3.200sheet thickness: 13,0total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4000 x 1700 x 1800 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Codpfx Asd Ab Hmjhkjgw Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3100sheet thickness: 13,0total power requirements: 30weight approx.: 12 tomessurements (LxWxH): 39502240x2100 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 13 mm  Cutting length: 4,100 mm Cutting angle: 2.3 °  number of hold-downs 19  Csdpfx Asfnqi Tshkjgw Backgauge: 1,000 mm via CNC  Motor power: 30 kW  Strokes per minute 8  Projection: 50 mm  Length: 5120 mm  Width: 2240 mm  Height: 2235 mm  Weight: 15500 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Cgsdpfxetp I S As Ahkew

Condition: good (used), TOS SUI 50/2000 lathe - Max. turning diameter: 560 mm Cgodsy D Eclepfx Ahksw - Distance between centers: 2000 mm - Spindle bore: 58 mm - Year of manufacture: 1990 Rapid traverse on longitudinal and cross slide

Condition: excellent (used), functionality: fully functional, Möhringer splitting wedge with large opening and pressure roller. Can also be adjusted across the center. Csdpfx Ahjv Tbxpekogw

Condition: new, functionality: fully functional, New, fully functional Leybold/VAT Leycon HV gate valve with bellows 6528450 for sale from old stock, with a 6-month warranty. Worldwide shipping available – request a quote! If you are looking for a vacuum pump, accessories, or any vacuum technology-related equipment, please contact us. We are happy to assist you with purchasing, technical advice, or developing custom solutions. Cgedpfoyrr Shsx Ahkow

Condition: excellent (used), functionality: fully functional, Wurster & Dietz roller conveyor with remover, roller width 2 m, with take-off table for boards, under-table crosscut saw with roller tables Csdpfxsyx U E Ss Ahkjgw

Condition: good (used), An electric bi-parting sliding gate is being offered. Hot-dip galvanized. Year of manufacture: approx. 2005. Codpex N Ta Njfx Ahksgw Dimensions: Total length of both leaves: 16.60 m. Gate opening: 12.00 m. Height: 1.20 m. Complete with drive units. Includes 4 fence panels: length 2.60 m x height 0.90 m.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Crane is available 3x!!! Load capacity at full outreach: 125KG Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Slewing range: 300°, connection: 400V 16A Cgodpoyzblwofx Ahkjw Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Shipping by freight forwarding or pickup by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Rated load at full outreach: 125kg Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Hook height: approx. 2.9 m Total weight: approx. 450 kg Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Csdpfxoyzblqj Ahkegw Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.

Year of construction: 1989, condition: excellent (used), machine/vehicle number: RES-RIO, Technical data: 1x Demag KBK 2 column-mounted slewing jib crane NL 500KG with Demag PK2 chain hoist (Fig. shows DK chain hoist) 5 identical cranes are available !!! Payload at full radius 500KG / 0,5to payload Height: approx. 3.55m Lower boom: approx. 3.05m Outreach: 3m Hook height: approx. 2.55m Weight complete approx. 550KG Dowel plate 40x40cm with 500KG Demag PK2 chain hoist incl. bolts, cable drag, trolley, end cap etc. Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Cedpsu Rn I Njfx Ahkogw Shipping by forwarding agent or collection by appointment only

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Cgsdpefnabysfx Ahkow Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl, in absolutely top condition! Device features: - Shear model: MSB 200 - Cutting capacity: see nameplate, up to 3mm steel – significantly more for aluminum - Working length: just over 2 meters - Manual back gauge: 500 mm - Side / angle gauge - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 meters - Sheet thickness (steel): 3 mm – significantly more for aluminum and zinc - The machine was used extremely rarely, approx. 1-2 times per month for thin sheets at a lamp manufacturer Cjdpfxewfzzte Ahkjgw - It shows hardly any signs of use; this condition is rare - The total price is less than half the current new price – the price list is from last year! If you have any questions, feel free to call briefly. We have this set twice, as well as other models such as the Schechtl MAX 200 (2.5mm) or MA 200 (2mm). The current net new price for both machines can be seen in the photos. You will receive an invoice with VAT shown separately. I can arrange shipping by freight forwarder if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible by prior telephone arrangement. Payment in cash upon collection – if there is anything else I can do for you, please call me briefly – thank you. Collection should take place within 8 days after the end of the auction. Item number:

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cjdpfeumpq Nsx Ahksgw Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Auction of a nearly new exhibition machine! TECHNICAL DETAILS Load capacity: 3.0 t Number of suction pads: 8 Cgjdpfx Aeygxabshkjw

Condition: used, Year of construction: 2004, Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7  Cgedpfx Ahsqqz T Rekew

Condition: used, Year of construction: 2005, Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available Cgodpol Hxmpefx Ahkow

Year of construction: 1979, condition: used, machine/vehicle number: RS82/12, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with PK chain hoist Payload at full reach 250KG / 0.25 tonne payload Height: approx. 3m UK boom: approx. 2.5m Reach: 3m Hook height: approx. 2m Complete weight approx. 350Kg Cjdpfevv N Auex Ahkjgw with chain hoist 250Kg chain hoist incl. bolt, cable drag, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 400 V, saw blade diameter: 700 mm, cutting depth: 370 mm, overall weight: 136 kg, Swing Circular Saw Holzkraft HWS 702 S Robust design with direct drive This firewood saw is a display machine that has never been used. !!! NEW - with full warranty !!! Year of construction: 2023 - Enclosed and secure sawing area for increased safety thanks to legally required saw safety guard - Fast and ergonomic handling with the patented safety flap - Anti-rotation device for the wood through embossed retaining hooks in the swing table - Stable, torsion-resistant steel frame - Powerful and robust circular saw motor - Effort-saving operation thanks to the ideal swing pivot point - Transport wheels for easy mobility - Shock, scratch and weather resistant due to high-quality powder coating Motor: Connection voltage 400V Rated power 7.5kW Saw Blade Peripheral speed 51m/s Blade diameter 700mm Cutting Capacity Max. round cut diameter 240mm Max. cutting diameter (flip cut) 250mm Max. split wood section 370 x 240mm Codpfx Ahsyvuileksgw The machine can be inspected at any time at the Chemnitz location.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Cjdpfx Asx Tii Ijhkegw Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: used, Year of construction: 2019, Base frame, carousel and swing arm of a Kuka KR 360 R2830 industrial robot with: Cgsdsx A D Rcjpfx Ahksw - Axis 2 motor: Siemens 1FK7105-5AY81-1YY3-Z - Counterbalance GA16

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve Cgsdpfx Ahjdki Rtekew -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece