Used T 40 E for sale (67,461)

Condition: like new (used), Operating conditions: The trailer is designed for use on level and paved roads in internal traffic. Towing vehicle with type designation: unknown Transported goods: unknown Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 40t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 5000 x 2400 mm, loading height 930 mm, loading area cover with wooden planks, all-round edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 670 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles (2 steered axle lines) to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 305mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Laodpfx Aaouf Rwyobsh Additional equipment: 2 lashing rods in each of the long sides For hire or sale EU-wide.

Condition: as good as new (ex-display), Year of construction: 2016, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece Lasdpfx Aashtm E Noboh table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity depending on viscosity. Laodpfxsk E Dxko Aabjh

Condition: used, mileage: 1,05,675 km, power: 143 kW (194.43 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2021, next inspection (TÜV): 09/2026, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Mercedes-Benz E300 T-Model Hybrid Special equipment: - Avantgarde interior - Electric lumbar supports at the front. adjustable - Media display - Multifunction telephony - Parking package with 360° camera, seat cover / upholstery: leather, mirror package Other equipment: - Adaptive brake light Airbag driver / passenger side Outside mirror in body color DAB tuner (digital radio reception) Roof rails (aluminum) Avantgarde design and equipment line Electric motor 90 kW (hybrid drive) Driver assistance system: active brake assistant Laedpfx Ajv D Tygeaboh Driver assistance system: Attention Assist (fatigue detection sensor) Electric windows front + rear Luggage / cargo area cover including safety net Urea tank (AdBlue) Tailgate with automatic opening and closing system Tail lights LED Hybrid 225 kW (engine 2.0 liter - 143 kW diesel) Isofix mounts for child seat on rear seat Automatic climate control (Thermatic 2-zone) Comfort chassis (Agility Control) Steering wheel with multifunction LM rims Air suspension with level control on rear axle Tire pressure control system Rear seat backrest split / foldable Low emissions according to Euro 6d emissions standard, SCR system (AdBlue technology) Side airbag (sidebag) at the front Subject to errors and prior sale. Internal vehicle number: 10724

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit Laedpfx Aasw Dbkrsbeh -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: used, Year of construction: 2016, operating hours: 13,606 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: gas, construction height: 2,920 mm, gearing type: automatic, Equipment: cabin, Linde H 40 T - Series 394 - Ledpfev Tau Nox Aabsah Manufactured in Germany. Used in Germany. Technically and visually in excellent condition and ready for immediate use. Serviced. New accident prevention inspection available upon request. A gas cylinder can be installed upon delivery upon request. 13,606 operating hours Full cab Heating Air conditioning 2-pedal operation 2 front work lights 2 rear work lights Standard mast with 150 mm free lift Cross lever joystick operation Lift height: 4,100 mm Overall height: 2,920 mm Free lift: 150 mm Forks 1,200 x 125 x 50 mm or alternatively for an additional charge Forks 1,400 - 1,600 - 1,800 - 2,000 - 2,200 - 2,400 mm 3rd + 4th valve / dual auxiliary hydraulics SE tires Front tires 70% Rear tires 70% Technical specifications - errors excepted. Sale without warranty.

Condition: used, mileage: 4,65,750 km, power: 294 kW (399.73 HP), first registration: 01/2003, overall weight: 19,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, maximum load weight: 8,530 kg, empty load weight: 10,470 kg, tire size: 295/60 r 22,5, wheelbase: 4,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: air, loading space volume: 31 m³, loading space width: 2,470 mm, loading space length: 6,350 mm, loading space height: 2,000 mm, machine/vehicle number: 317, Equipment: ABS, air conditioning, differential lock, low noise, parking heater, tail-lift, Continuous brake Engine brake + retarder engine capacity 10.308 ccm Laodpsinl I Dsfx Aaboh Air conditioning Wicked swivel wall box Canopy Dautel underfolding platform type DLB1500-44VR/2411U 2 sunbeds Sun visor Load securing certificate Errors excepted

Condition: good (used), functionality: fully functional, machine/vehicle number: 552410, Year of construction: 1974, Manufacturer: Bobst, Switzerland Model: Autoplatine SP 1420 E – 600 T Lsdpjw Rb Ezsfx Aabjah Type: Die Cutting Machine / Autoplatine Year of manufacture: 1974 Machine No.: 552410 Technical specifications: - Max. sheet size: 1420 x 1020 mm - Min. sheet size: 700 x 500 mm - Speed: up to 4,500 sheets/hour - Power supply: 380 V, 50 Hz Features: - Robust construction for carton and corrugated board - Automatic platen die cutting - Pile feeder and delivery - Mechanical control with operator panel - Proven Swiss quality

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Ledpfx Asup T Uqsaboah Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 2,43,439 km, power: 427 kW (580.56 HP), first registration: 01/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, crane, cruise control, differential lock, parking heater, traction control, = Additional options and accessories = - AdBlue system - Differential lock - Electric windows - Refrigerator - Engine brake - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Sun visor - Spotlights - Auxiliary heater (parking heater) - Central locking = Comments = Hub reduction. Adjustable fifth wheel, height: 135 cm. Wheelbase: 360 cm, axle 1-2 HMF 4020 K8 - 4 x hydraulic outriggers - 8 x hydraulic extensions Ledpfx Aaew Nr U Deboah - Winch - Scanreco radio remote control 4.70 m – 7,180 kg 6.50 m – 4,800 kg 8.40 m – 3,440 kg 10.40 m – 2,570 kg 12.40 m – 2,010 kg 14.50 m – 1,620 kg 16.70 m – 1,340 kg 19.00 m – 1,150 kg 21.30 m – 1,010 kg = Additional information = Technical information Number of cylinders: 6 Driveline AdBlue system: Yes Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65R22.5; Steering axle; left tire tread: 80%; right tire tread: 80%; Suspension: leaf springs Rear axle 1: Tire size: 295/80R22.5; Twin tires; left inside tread: 90%; left outside tread: 90%; right inside tread: 90%; right outside tread: 90%; Suspension: air suspension Rear axle 2: Tire size: 295/80R22.5; Twin tires; left inside tread: 90%; left outside tread: 90%; right inside tread: 90%; right outside tread: 90%; Suspension: air suspension Weights Unladen weight: 16,675 kg Payload: 11,325 kg GVW: 28,000 kg Functional Crane: HMF Financial information Price: On request Identification Type number: Arocs 2658 6x4 / HMF 40 t/m - 21 = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: like new (used), Year of construction: 2025, operating hours: 3 h, available immediately: Kaeser ASK 40 T - 11 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 2 Year 2025 Operating hour: 3 h Pressure: 11 bar Nominal power: 22 kW Delivery rate: 3.50 m³ / min Sound level: 69 dB (A) Compressed air outlet: 1 1/4" Dimensions length x width x height: 800 x 1460 x 1530 mm Weight: 620 kg Visit our store. We always have a large selection of new and used compressors in stock! Lsdpfxjwvfwto Aaboah

Condition: defective spare-parts repository (used), functionality: limited functionality, Test listing Lasdjw H Ar Nopfx Aabjh

Condition: used, MIDAS-T-001/MIDAS-E-HCL, HBr, Honeywell, gas detector for HBr, Rev. 1.08 Lajdpfx Aajvrgi Djbjh Model: MIDAS-T-001/MIDAS-E-HCL Type: HBr Condition: Used

Condition: ready for operation (used), Meditec Reinhardt Thyzel CLU 40 E Laser with control panel, serial no. according to photo,used, normal signs of wear, 100% functional, scope of delivery according to photosPLEASE NOTE: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lodpfx Aei Eb Dysaboah

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Laodpfjwfdnisx Aabeh 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2007, operating hours: 24,287 h, functionality: fully functional, machine/vehicle number: H-H5022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Control system: Hurco Ultimax X travel: 1,270 mm Y travel: 660 mm Z travel: 610 mm Speed: 12,000 rpm Power: 15 kW Torque: 238 Nm Tool magazine Tool magazine: 40 stations Tool holder: SK40 Tool diameter: 75 mm Tool length: 300 mm Tool weight: 10 kg Laedpfju Dairox Aabjh Table and clamping Clamping surface: 1,500 x 660 mm T-slots: 6x 18 x 1000 mm Table load (max.): 1,300 kg Spindle to table distance: 150 - 760 mm Rapid traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 20 m/min MACHINE DETAILS Dimensions: 3,250 x 2,350 x 2,950 mm Weight: 9 tons EQUIPMENT - Chip conveyor - IKZ system with filter and high pressure - Tool measurement: laser, BLUM - Interface measuring probe prepared - Electronic handwheel - Spindle cooler

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU 10 with swiveling support ring Lasdskm Rnkjpfx Aabsh -Clamping range: 0 - 40 mm -Load capacity: 0.3-3 t -Dimensions: 230/90/H380 mm -Weight: 15 kg

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 2,100 h, turning diameter over cross slide: 200 mm, spindle bore: 66 mm, turning diameter over bed slide: 435 mm, center height: 217 mm, turning length: 1,000 mm, total length: 3,061 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 1 rpm, bed width: 202 mm, For sale: WEILER E40 Precision Lathe – only 2100 hours on the clock, Machine condition as new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and a 1,000 mm turning length. Perfect for workshops needing accuracy and durability. Contact for pricing and details! Ledpfxjv A Irzj Aabjah

Condition: used, Year of construction: 2000, x-travel 600 mm y-travel 400 mm z-travel 400 mm table surface area 800 x 400 mm Lajdpjux Agiofx Aaboh spindle taper SK 40 control HEIDENHAIN TNC 310 spindle turning speed range 10 - 3150 U/min spindle drive 5,5 kW feed - longitudinal/cross 1 - 5000 mm/min feeds vertical 0,5 - 2500 mm/min rapid traverse 6 / 6 / 3 m/min total power requirement 10 kVA weight of the machine ca. 2,5 t dimensions of machine L x W x H 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Lodowka Rwspfx Aaboah Availability: short term Location: Solingen

Condition: excellent (used), CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water cooled Type series: T-40/600 Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm Outer dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth, approx. 1850 mm Temperature working range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K temporally heating speed: 2,5 K/min cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz rated power: approx. 5,5kW rated current: approx. 8,5 A Refrigerant: R404A Weight: 550 Kg Type: T-40/600 /011232 For you as a buyer for safety the following information! Ledpfx Aaohxyg Hebeah The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, pressure 40 t stroke 250 mm table-size 625 x 1100 mm Lodpfx Aajvx Dwrebsah flat steel flat 200 x 20 tube diameter max. 2" table height 950 mm work speed 9,1 - 4,7 mm/sec return speed 45 mm/sec weight of the machine ca. 750 kg dimensions of the machine ca. 1,25 x 0,9 x 1 m total power requirement 3 kW quantity of oil 45 l New hydraulic horizontal bending press with stepless pressure regulation under load, patented tool holder, the BOTTOM cylinder allows 360° bends! Immersion depth and retraction point adjustable by handwheel,stepless feed adjustment. The machine is in the following sizes obtainable: pressure from 22 until 150 t, stroke from 200 until 450 mm. Many tools are in offer for the different kind of bending with additional price list. For more information please look at the video.

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight Lasdpfx Aajv Dia Asboh 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Manufacturer Motan Type 40-20/BL-T MT Power 3 kW Blade inlet 40 x 20 cm Lasdpfx Aeuk Aiysabsh Technical condition very good

Year of construction: 2022, condition: excellent (used), Dycometal Type: CCK -40/1500T Climate chamber water-cooled Volume liters 1500 Internal dimensions height 1000 mm width 1000 mmm depth 1500 mm External dimensions Height 2200 mm Width 1293 mmm Depth 3400 mm Thermal test Minimum temperature -40°C Maximum temperature +150°C Thermal gradient cooling 2.0 K/min. Thermal gradient during heating 3.5 K/min. Temperature stability ±0.1°C to ±0.3°C Temperature uniformity ±0.5°C to 1.5°C Climate test Temperature range +10°C to +90°C Humidity range 10% to 98% %RH Dew point range +6.5°C to +86°C Humidity stability ±1%RH to ±3%RH Water-cooled condenser Nominal voltage 400 V 3N~PE 50 Hz Output 16.1 kW 27.5 A Refrigerant R-452A Weight: 1120 kg Condition: second-hand / used Laodou N Uugepfx Aabjh Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.