Used Tailstock for sale (1,575)

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Rcsdpfjzavyfjx Abpef

Condition: ready for operation (used), SYKES 5 E MODEL, 2 UNITS AVAILABLE Double helical gear cutting, herringbone gear generator SYKES 1600 mm Special machine for gear power transmissions, oil, petrol & gas industry. In very good working condition. Specifications: Work spindle bore: 8.75" (222 mm) Tailstock to face of work spindle, max: 48" (1219 mm) Standard cutter diameter: 6" P.C.D. Standard cutter bore: 3.5" Rcodpfx Asx Rvgusbpjf EXTERNAL GEARS: Blank diameter, max: 63" (1600 mm) Min: 0 Face width, double helical: 0 - 18" (0 - 457 mm) Face width, spur or single helical: 0 - 10" (0 - 254 mm) INTERNAL GEARS: Blank diameter, max: 66" (1676 mm) Face width: 0 - 8" (0 - 203 mm) P.C.D., max: 66" - (2 x rim thickness) Pitch range, max: 16 D.P. (1.6 Mod) Min: 1.5 D.P. (17 Mod) Helix angle range: 0 - 45 degrees Dimensions: 3300 mm (L), 3250 mm (W), 2700 mm (H) Weight: 18,940 kg

Year of construction: 1980, condition: used, MITSUBISHI MAF 210/150A CNC HORIZONTAL BORING MILL MITSUBISHI MAF210/150A, YOM 1980 . Rcedjca Hr Nspfx Abpef MAIN TECHNICAL DATA: Boring Spindle ..... 150 mm Milling Spindle ..... 210 mm Vertical Head Travel, Y-Axis ..... 3480 mm Column Travel, X-Axis ..... 14000 mm Ram Travel, Z-1 Axis ..... 700 mm Boring Spindle Travel, Z-Axis ..... 900 mm Spindle Speeds,4-Ranges ..... 4-800 RPM Rotary table 1600x2100mm Tailstock Many accesories (milling heads, chuck...) MORE PICTURES AND MOVIES ON REQUEST

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Weiler Primus VC precision center lathe, year of manufacture 2008, 3-axis digital display, Siemens, with AC drive, stepless speed control, CE compliant! Technical data: >> Year of manufacture 2008, machine no. DB-01 >> Center height 140 mm >> Center distance 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display, Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet Rcjdpfx Ajzl T Trobpof >> 3-jaw chuck 160 mm with 5 sets of jaws >> Stop >> Mulifix size A with 4 steel holders >> Electric chip guard >> Machine lamp >> Drill chuck, centering point >> Change gears >> Splash guard About the machine: Offered is a Weiler Primus VC lead screw and draw spindle lathe, year of manufacture 2008, in very good condition. The control system, in combination with a precision center lathe from Weiler, performs the following functions: graphical display of travel paths and direction, graphical representation of the measuring system on the lathe, compensation of tool corrections, zero point adjustment to compensate for the workpiece position, radius/diameter switching, graphical display of the main spindle rotation direction, graphical display of the position of the machine's speed potentiometer. A very nice lathe with AC drive and stepless speed control of the working spindle. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced with a ground finish. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,767 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 570 mm, total height: 1,800 mm, total width: 1,350 mm, overall weight: 2,500 kg, bar diameter (max.): 52 mm, controller manufacturer: SIEMENS, product length (max.): 2,100 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. Contact us for further details. • Number of Live Tools: 12 • Live Tool Speed: 6,000 rpm • Live Tool Torque: 23.5 Nm • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: 280 mm • Maximum Swing Diameter: 400 mm • Distance Between Centers: approx. 550 mm • Main Spindle Nose: A6 • Bar Capacity: 52 mm • Main Spindle Torque: 92 Nm • Coolant Tank Capacity: approx. 85 l • Coolant Pressure: 8 bar • Supply Voltage: 3/PE ~ 400 V • Collet Chuck Used for Clamping • Dust Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 34 A • Rated Current (IN): 35 A • A collet chuck used for clamping • Turret with driven tools Optional equipment: • Bar feeder Rsdpfx Abezlq I Tjpjcf • Parts catcher • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: excellent (used), Year of construction: 2011, Centre height: 330 mm Rodpfjl D Rddjx Abpecf Swing over bed: 660 mm Swing over cross slide: 430 mm Distance between centers: 1500 mm Bed width: 400 mm Spindle mount DIN 55029: A 8 Spindle bore: 82 mm Speed range, 3 steps: 7 – 135, 30 – 550, 110 – 2200 rpm Feed rate X/Z: 3000 / 6000 mm/min Rapid traverse X/Z: 4 / 8 m/min Tailstock quill taper: MK 5 Drive power: approx. 9 kW Dimensions (L x W x H): 3450 x 1750 x 1770 mm Weight: 2850 kg Equipment / Special features: • Cycle control FAGOR 8055-i A TC with TFT color display • Electronic handwheels • Interface • 4-position tool turret, programmable change via motorized drive • 3-jaw chuck, make BISON, diameter 300 mm • Full enclosure, sliding doors with electric safety interlock • Coolant system • Air-conditioning for the control cabinet • Central lubrication • Machine feet • Lighting • CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp Rcsdjw Dvv Aepfx Abpof - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Rjdpfxeznz Txs Abpocf Extra Information • Machine still under power • The machine has been working effectively in 1-shift operation since it was purchased • The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation • All manuals are available Optional equipment (extra charge): • The chuck incl. hard & several sets of soft jaws • Tailstock • Tools • Steady rest Dimensions Machine Depth 3250 mm

Condition: new, Year of construction: 2026, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Full-length chip guard Coolant system 24V halogen work light Threading dial indicator Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Rcedpfexd Upxjx Abpof Inch threads 0.5–28 TPI Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, Rcedezqr Hnopfx Abpsf coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: good (used), Year of construction: 2019, 256mm maximum cutting diameter, 455mm max turned length, 4,000rpm spindle speed, 51mm bar capacity, Rcjdpfxjzrfnue Abpef 12 station VDI turret, milling speed 5,000rpm, 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor, parts catcher, Barfeed unit.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, Control: Fanuc 0-T Max. spindle speed: 6000 rpm Chuck size: 6 in Max. machining diameter: 160 mm Max. machining length: 285 mm Spindle bore: 40 mm X-axis travel: 100 mm Z-axis travel: 290 mm Axes: 2 Tool positions: 8 Rcodpfszr I Auex Abpof Turret stations: 8 Tailstock: Included Made in: South Korea Year: 2002 Swing Over Bed: 300 mm Spindle Power: 11 kW Weight: 2600 kg Length: 2000 mm Width: 1100 mm Height: 1300 mm

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Longitudinal feed range 0.028 – 6.43 mm Rodpfx Aszr I H Hobpocf Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Condition: new, Year of construction: 2026, CORMAK TORNADO 460x2000 is a robust and highly accurate universal lathe designed for professional metalworking in industrial environments. With a 2,000 mm distance between centers and an 82 mm spindle bore, it is an ideal solution for machining long shafts, sleeves, pipes, and other large workpieces. The machine combines precision guideways, a rigid cast iron construction, and comprehensive standard equipment to deliver outstanding performance across a wide range of machining operations. Key Features Versatile machining capabilities – external turning, internal turning, taper turning, metric, imperial, module and DP threading, drilling, boring, and polishing. 2,000 mm distance between centers – ideal for machining long shafts, tubes, and cylindrical components. 300 mm wide cast iron bed – hardened and precision-ground for excellent rigidity, vibration damping, and long service life. 2-axis Digital Readout (DRO) – equipped with optical scales for accurate positioning and improved machining precision. 82 mm spindle bore – accommodates large-diameter and long workpieces. Rapid traverse joystick – significantly reduces carriage travel time and improves productivity. Direct thread selection – thread parameters can be changed without replacing change gears. Thread chasing dial – enables accurate and repeatable thread cutting. Removable gap bed – allows machining of workpieces up to 690 mm in diameter. Construction and Technology The CORMAK TORNADO 460x2000 is designed for precision and durability under demanding production conditions. The ergonomic control panel and precision spindle assembly provide smooth operation across a 25–2000 RPM speed range. The headstock transmission features hardened and precision-ground gears, ensuring quiet operation, long service life, and reliable power transmission. The heavy-duty cast iron bed offers exceptional rigidity and resistance to deformation, maintaining machining accuracy over years of industrial use. An integrated coolant system and LED work light enhance operator comfort and improve visibility during machining. Standard Equipment 250 mm 3-jaw chuck with internal and external jaws 320 mm 4-jaw chuck with internal and external jaws 2-axis Digital Readout (DRO) with optical scales Fixed steady rest Follow rest MT4 dead center MT7/MT4 spindle reduction sleeve Change gears Coolant system Work light Oil can Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Technical Specifications Specification Value Swing over bed Ø460 mm Swing over cross slide Ø274 mm Swing over gap Ø690 mm × 240 mm Center height 230 mm Distance between centers 2000 mm Bed width 300 mm Maximum tool size 25 × 25 mm Cross slide travel 290 mm Top slide travel 120 mm Spindle bore Ø82 mm Spindle nose D1-8 Spindle taper Ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25–2000 RPM Lead screw Ø35 mm × 6 mm Imperial thread range 2–112 TPI (60 pitches) Metric thread range 0.1–14 mm (41 pitches) Diametral pitch threads 4–112 DP (50 pitches) Module thread range 0.1–7 MP (34 pitches) Longitudinal feed rates 0.054–3.04 mm/rev (42 feeds) Cross feed rates 0.014–0.784 mm/rev (42 feeds) Tailstock quill travel 120 mm Tailstock quill diameter Ø60 mm Tailstock taper MT4 Main motor 5.5 kW Coolant pump motor 0.09 kW Machine dimensions (L × W × H) 3220 × 1040 × 1340 mm Rcsdpfx Absv E Eiispef Weight 2785 kg

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface Rjdpfxeztrkle Abpjcf • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Rsdpjw E H E Rjfx Abpocf Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Year of construction: 1976, condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, year of last overhaul: 2026, The machine underwent a comprehensive retrofit in 2026! New centering point with carbide insert on the workpiece spindle stock Tailstock with MK-3 mount and air lift Adjuster on the tailstock New centering point with carbide insert on the tailstock 2 grinding wheel flanges 1 new grinding wheel 1 internal grinding spindle Completely renewed paper band filter with new filter fleece and circuit Completely overhauled, steplessly adjustable grinding spindle motor Automatic grinding cycle with dwell time and shut-off Machine geometrically completely overhauled Guides ground and scraped Hydraulic cylinder overhauled Redpfx Aozr Ep Eobpocf New piston rod and seals Machine body and assemblies blasted, primed and completely painted TECHNICAL DETAILS Center height: 125 mm Center distance: 600 mm Grinding wheel flange dimensions: 400 × 50 × 127 mm Speed of internal grinding spindle: 14,000 rpm EQUIPMENT Workpiece spindle stock standard with MK-5 mount, swiveling Stepless speed control via potentiometer

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MAIN SPINDLE - Spindle power : 30 [kW] - Spindle speeds : 3.300 [rpm] - Max. bar diameter : 102 [mm] - Max. turning diameter : 420 [mm] - Max. diameter on bench : 750 [mm] - Spindle nose : A2-8 - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 / 1605 [mm] - Tool type : VDI 50 - Live tools speed : 25 - 4.000 [rpm] - Live tools power : 7,5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Distance between centers : 1.500 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 55 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.270 x 2.050 [mm] - Machine height : 2.000 [mm] - Machine weight : 7.500 [kg] MACHINE HOURS - Number of hours under power : 31.838 [h] Rjdpfxsuhbn Uo Abpjcf EQUIPMENT - CNC : Mazatrol 640T NEXUS - Interface : PCMCIA / RS232 - Coolant tank : 350 [l] - Chips conveyor - Tool probe - Rest : SMW SLU-3.1-MS Ø20-165 - Number of turning tool holders : 6 - Number of fixed tool holders : 16 - Chuck 3 jaws : KITAGAWA B-212 15X

Condition: used, TECHNICAL DETAILS - Number of axes : 3 Rsdpfxowyx Rne Abpscf MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 26 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 91 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 650 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 245/1040 [mm] - Tool type : BMT65 - Live tools speed : 5000 [rpm] - Live tools power : 5.5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 966 [mm] - Quill stroke : 100 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3780 X 1610 [mm] - Machine height : 1937 [mm] - Machine weight : 6500 [kg] MACHINE HOURS - Number of working hours : 0 [h] EQUIPMENT - CNC : Siemens 828D - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : SHOPTURN - 3 colors status lamp - Coolant tank * with high-pressure pump : 10 [bars] * With washing gun - Chips conveyor - Tool probe - Parts catcher - Predisposition for barfeeder - Rest predisposition - Chuck 3 jaws : SAMCHULLY 305 (mm)

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. machining length : 728 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 6000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Tailstock stroke : 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS Rsdpfx Abex Tvklopjcf - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 9 - Number of turning tool holders : 3 - Electric transformer - Collet chuck

Condition: used, TECHNICAL DETAILS - Distance between centers : 650 [mm] - center height : 175 [mm] - Max. part weight between centers : 80 [kg] - X/Z stroke : 285 / 800 [mm] - Axis X programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Axis Z programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Table orientation : 0 - 8.5 [°] GRINDING WHEEL HOLDER HEADSTOCK - T1 grinding wheel dimensions : 500 x 63 x 203,2 [mm] - Speed : 50 [m/s] - Power : 9 [kW] - Manual orientation : -15 / +195 [°] - Indexing precision : 2.5 [°] - Internal grinding : 40.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Type of cone : CM5 - Speed : 1 - 1500 [rpm] - Power : 1.8 [kW] - Boring : 30 [mm] - C axis indexing precision : +/- 0,5 [°] - TAILSTOCK - Type of cone : CM4 - Quill diameter : 50 [mm] - Quill stroke : 35 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 20 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.670 x 2.050 [mm] - Machine height : 1.900 [mm] - Machine weight : 4000 [kg] MACHINE HOURS - Number of hours under power : 190 [h] EQUIPMENT - CNC : FANUC Oi-TD - Electronic handwheel Rodpfx Ajylc R Uobpocf - 3 colors status lamp - Oil mist extractor - Linear scales on axes X/Z - Dynamic wheel balancing : MPM - Automatic contact detection : SENSITRON 6 - Fixed dressing device - Workpiece probe - Coolant tank : 375 [l] * with paper filtering unit

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer Rcsdpfjy I Dixjx Abpjf

Condition: used, TECHNICAL DETAILS Rodpfsy I Di Esx Abpjcf - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 370 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 380 / 615 [mm] - Y stroke : 105 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 / 40.000 / 50.000 [mm/min] - B Axis stroke : +/- 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : CAPTO C5 - Spindle speeds : 12000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 815 [mm] POWER SUPPLY - Total installed power : 39 [kVA] EQUIPMENT - CNC : FANUC 31iB5 - Electronic handwheel - Coolant tank - Filtration : ECODE IP 600 C - Chips conveyor : MAYFRAN CS 1 - Oil mist extractor - Tool probe : Renishaw - Workpiece probe : Renishaw - Collet chuck - Chuck 3 jaws

Year of construction: 2003, condition: ready for operation (used), Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. rapid traverse speed: 20m/min, control: Siemens 840D SL, connected load: 135kW, length: 7800mm, width: 3000mm, height: 3250mm, weight: 42t, with machine documentation, installation plan, foundation plan, transport plan, Knoll coolant system, Knoll chip conveyor, ILT extraction system and Promot loading and unloading gantry. Regularly serviced by the manufacturer, the machine was completely overhauled by the manufacturer in 2016. An on-site inspection is possible. Rcedpfjztdtlex Abpof

Year of construction: 2001, condition: ready for operation (used), X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool cabinets and documentation. The main spindle produces running noise. An on-site inspection is possible. Rcodpfx Abszrn H Tjpjf