Used Tailstock for sale (1,613)

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW Fpjdpfxoxrf Stj Aatel • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: ready for operation (used), functionality: fully functional, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, The 3-phase 380V motor is running smoothly! Forward and reverse operation. Electronic motor brake. Geared headstock, gears running in oil. 9 adjustable spindle speeds from 52 to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Fpodpfx Aaozkwfcjtol Power feed in both directions, including cross-travel. Coolant pump. Emergency foot pedal. D1-3 camlock spindle nose. Dickson quick-change toolpost with a total of 4 toolholders. MT3 tailstock. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €4,150.00

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR lathe, from an educational institution -Maximum turning height 180mm -Maximum turning length 1000 mm -Spindle bore 56 mm -Speed range 56 - 2000 RPM -Automatic longitudinal/facing feeds -Threading capabilities / Metric / Inch etc. -Tailstock MK 4 -Three-jaw chuck 200mm -Multifix base with inserts -Electric chuck guard -L & Z spindle cover -Work light Fpodpfxszww D Ee Aatel -Coolant system -2 x Emergency stop -Machine documentation Dimensions: L x W x H 2.5 x 1.1 x 1.7 meters / Weight 1500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,568 h, functionality: fully functional, 4-axis Lathe – Universal | Brand: DMG MORI | Type: CTX alpha 500 V4 Year of manufacture: 2019 (Start-up: July 2029) (Version with Y-axis and driven tools) The machine can be inspected by appointment under power. Condition: Fully functional / ready for operation. Operating hours (week 34/2026): - Total operating hours: 12.641 h - Spindle hours: 2.605 h TECHNICAL SPECIFICATIONS / EQUIPMENT: - Turning diameter: 165 mm - Turning length: 500 mm - Main spindle as an integrated spindle motor, ISM 52 Synchro * Drive power (100/40% duty cycle): 13/14 kW * Speed range: 20 - 6.000 rpm - Partial hollow chuck (hydraulic) * Pull-tube internal diameter: 52 mm - C-axis and spindle brake (hydraulic) - Y-axis for cross slide: +/- 40 mm, stroke: 80 mm - Tool turret: 12-position, brand: Sauter * Tool holder: VDI 30 mount, DIN 69880-30 * Driven tools * Connection/drive to DIN 5480 - Direct measuring system on the X-axis - Tailstock - CNC control: Siemens SINUMERIK 840D sl Operate * User interface: CELOS / ERGOline * Programming: ShopTurn 3G - Hollow spindle stop, adjustable, mounted at the rear on a hollow chucking device, Ø 66 mm (chuck-independent) * Belt filter system, filter fineness 40 µm * Level monitoring - Mechanical oil mist separator - Special version, operating mode BA4 “emery operation” - Coolant spray gun - Chip conveyor (hinged belt), incl. coolant tank and coolant pump, - Coolant system: 8 / 20 bar, * Coolant tank: approx. 600 l (selectable via M-function, with supply through the turret disc to the turret stations) - DMG MORI NETSERVICE - DMG MORI IoTconnector (enables DMG MORI’s online services) - DMG MORI Service Agent (controlled machine maintenance and servicing) - Bar machining package D65, consisting of: * D66 hydraulic hollow-bar clamping device * Workpiece retrieval device, with conveyor belt, conveying to the left for parts up to max. D65 x 185 mm in length, max. workpiece weight 3 kg - Documentation - CE marking Machine dimensions (L x W x H): approx. 3.843 x 2.580 x 1.825 (Height including attachment: approx. 2.415 mm) Available as an option: Fpedpfozvz Aijx Aatol Milling attachments, - Collet chucks, - Jaw chucks, - Tools No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale -

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head Fpodpfxowvpt Ee Aatjl -Manufacturer: Swedturn, Type ST12 CNC 300 tailstock -Quill: hydraulically driven -Dimensions: see photos -Dimensions: 900/650/H450 mm -Weight: 265 kg

Condition: used, Parallel Lathe SOCOMO type STAR 305 Fpodpfx Ajzwdc Ieatjl Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. Fpsdpfxjzx Nzfe Aatjl - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: used, Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 2,000 mm, turning diameter: 550 mm, spindle bore: 83 mm, travel distance X-axis: 345 mm, travel distance Z-axis: 2,150 mm, spindle motor power: 15,000 W, total length: 4,190 mm, total width: 2,245 mm, workpiece weight (max.): 2,000 kg, type of input current: three-phase, overall weight: 4,900 kg, Equipment: documentation/manual, Buffalo Microcut BNC-2280X CNC Lathe with FANUC Control For sale: Buffalo Microcut BNC-2280X CNC lathe in good working order. A robust, heavy-duty machine suitable for machining large and long workpieces. Main specifications: CNC control: FANUC Swing over bed: 550 mm Swing over cross slide: 310 mm Fjdpfxszv D Dve Aatepl Maximum turning length: 2,000 mm Maximum workpiece weight with tailstock: 2,000 kg X-axis travel: 345 mm Z-axis travel: 2,150 mm Spindle bore: 82 mm Spindle speed: up to 3,500 rpm Box guideways Tailstock Machine weight: approx. 4,900 kg Overall dimensions: approx. 4190 × 2245 × 2050 mm The machine is complete and operational. It can be inspected and tested while powered on. Loading and transport can be arranged. More information, photos, and videos are available upon request.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC turning machine Okuma LU 3000 EX-M2SC 1000 Control system: OSP-P300LA Year of manufacture: 2022 Internal machine number: 66 Turning length: 1,000 mm Turning diameter: 340 mm Fpsdpfx Aezwl Aieatjl Spindle speed: 5 - 5,000 rpm Tool shank: VDI 40 2 tool turrets A-turret: 12 tool positions / all positions powered B-turret: 8 tool positions - Tailstock - Hinged-belt chip conveyor - 3-jaw chuck Kitagawa B-212 Z220, bore in the chuck Ø 91 mm - Touch setter - One Touch IGF - Handwheel on the control panel - Tool monitoring system - Reinforced coolant pump, 8 bar

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard Fpsdpfjw N Rh Ajx Aatsl - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: good (used), Universal tool grinding machine Stock number: 3136 Manufacturer: WMW (Gotha) Year of manufacture: 1976 Type: SWU 250-I Machine number: 201/76 Fodpfx Aozx D U Tsatopl Working area Maximum workpiece length: 600 mm Maximum workpiece diameter: 250 mm Maximum disc cutter diameter: 360 mm Maximum grinding length: 450 mm Table Table travel, longitudinal, manual: 500 mm Table travel, longitudinal, automatic: - Table swivel: 0-90° Working surface: 120 x 950 mm Taper in the universal chuck: MK 5 Taper in the tailstock: MK 2 Grinding spindle Grinding spindle head height adjustment: 250 mm Cross travel: 230 mm Rotatable: 350° Tiltable: 15° Maximum disc diameter: 160 mm Grinding spindle speeds: 2200/3500/5200 rpm Power consumption: 1.8 kW Condition: good Accessories/Equipment: extensive accessories – see pictures Dimensions and weights Space requirement: 1,300 x 2,000 mm Machine weight: 0.9 t

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. Fpjdpfxjy Dunws Aatjl An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm Fjdpfeya Dz Dsx Aatepl - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Fsdpfx Aaev Epzvstopl Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter Fpodpfxezwl U Ss Aatsl

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Fpodpfx Asxwlmujatjl Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: used, Year of construction: 2008, machine/vehicle number: M11W100487, turning diameter over cross slide: 550 mm, turning length: 2,500 mm, turning diameter: 610 mm, spindle bore: 125 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 2,560 mm, spindle motor power: 42 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 2,500 rpm, feed length X-axis: 410 mm, feed length Y-axis: 180 mm, feed length Z-axis: 2,560 mm, quill travel distance: 150 mm, quill diameter: 150 mm, quill stroke: 150 mm, swing diameter over cross slide: 550 mm, turning diameter over bed slide: 820 mm, torque: 2,000 Nm, overall weight: 6,000 kg, swing diameter over bed slide: 820 mm, chuck outer diameter: 400 mm, spindle nose: A2-11" (KK11) DIN 55026, CNC Turning Center EMCO Maxxturn 110 | Year of Manufacture: 2008 | Spindle A2-11" & Y-Axis For sale is a powerful CNC turning center for complete machining from the manufacturer EMCO, model Maxxturn 110. Equipped with the large A2-11" main spindle (ZF two-stage gearbox), C-axis, Y-axis, and driven tools, the machine is ideal for heavy machining and complex milling operations. General Machine Data * Manufacturer: EMCO * Model: Maxxturn 110 * Year of Manufacture: 2008 * Serial Number: M11W10048 * Control System: Siemens SINUMERIK 840D (with ShopTurn) * Machine Weight: 6,000 kg (L2500) Working Area * Swing diameter over bed: 820 mm * Swing diameter over cross slide: 550 mm * Max. Turning Diameter: 610 mm * Max. Part Length: 2,500 mm (depending on equipment) * Distance between centers: 1,666 mm / 2,666 mm Travel & Feeds * X-axis: 410 mm (rapid traverse: 24 m/min) * Z-axis: 2,560 mm (rapid traverse: 30 m/min) * Y-axis: -80 / +100 mm (rapid traverse: 12 m/min) Main Spindle (A2-11") * Spindle connection: A2-11" (KK11) DIN 55026 * Drive: ZF gearbox motor (2-stage: 1:1 / 1:4) * Speed range: 0 - 2,500 rpm * Drive power (100/40% ED): 35 / 42 kW * Torque (100/40% ED): 1,672 / 2,000 Nm * Spindle bore: 125 mm * Bore in draw tube (part-through boring): 110 mm * Bearing inner diameter (front): 190 mm * Clamping device: Röhm power chuck (prepared for max. 400 mm) C-Axis * Drive: Automatically swiveling gearbox motor * Torque: 2,000 Nm * Holding torque spindle brake: 2,400 Nm * Rapid traverse: 15 rpm Tool Turret & Driven Tools * Number of stations: 12 (all driveable) * Tool holder: VDI 50 (DIN 69880) * Additional holders: 12 block tool stations on the circumference * Switching time (incl. locking): 0.5 s * Speed of driven tools: 0 - 4,000 rpm * Power of driven tools: 10 kW * Torque of driven tools: 56/66 Nm (Siemens) Tailstock & Steady Rest * Quill stroke: 150 mm Fpjdpfxjzypxte Aatjl * Quill diameter: 150 mm * Taper: MK 5 * Max. clamping force: 22,500 N * Steady rest: Prepared for traveling steady rest (e.g. Röhm SLZ 1152) Coolant & Disposal * Hinged belt chip conveyor (integrated into the basic machine) * Coolant pressure through turret: 7 bar (optional 14 bar) From an insolvency proceeding, sale as is. Offer deadline: September 30, 2026, 6:00 PM. Package price for multiple machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 610 mm, spindle bore: 130 mm, turning diameter: 1,000 mm, center height: 500 mm, turning length: 3,000 mm, quill diameter: 160 mm, quill travel distance: 300 mm, total length: 6,350 mm, total width: 2,190 mm, total height: 1,810 mm, spindle speed (max.): 315 rpm, spindle speed (min.): 3 rpm, swing diameter over cross slide: 610 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, metric thread steps: 44, bed width: 755 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, Maximum turning diameter: 500 mm Distance between centers: 3000 mm Bed width: 755 mm Diameter of swing over bed: 1000 mm Diameter of swing over carriage: 610 mm Spindle bore: 130 mm Spindle nose: D1-15/Short taper 15 Spindle speed range: 3.15 - 315 rpm (21 steps) Longitudinal feed range: 0.1 - 12 mm/rev, 57 steps Cross feed range: 0.05 - 6 mm/rev, 57 steps Rapid traverse rate longitudinal/cross: 3700/1850 mm/min Metric threads: 1 - 120 mm, 44 steps Fpodpfoy S Rqdjx Aatol Inch threads: 3/8 - 28 TPI, 31 steps Module threads: 0.5 - 60 mm, 45 steps Diametral threads: 1 - 56 DP, 38 steps Tailstock quill diameter: 160 mm Quill mounting: MK 6 Quill travel: 300 mm Motor power: 22 kW Weight: 14,400.00 kg Dimensions: 6350 x 2190 x 1810 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Fedpfx Aozuygdoatopl Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,500 mm, turning diameter: 720 mm, travel distance X-axis: 800 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 30,000 W, total height: 2,500 mm, total length: 5,000 mm, total width: 3,000 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, overall weight: 16,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Integrex 50 YB × 1500 – CNC Multi-Tasking Machine Heavy-duty, versatile CNC turn-mill center with live tooling, B-axis, Y-axis, and a large chain tool magazine. Well-suited for demanding high-precision machining with heavy workpiece loads. Key highlights: Large capacity: 1,500 mm between centers, 710 mm swing over bed Heavy workpiece capacity: up to 1,500 kg shaft work / 400 kg chuck work Full multi-tasking axes: C-axis (0.001°), B-axis swivel (210°, 0.001° indexing), Y-axis (±105 mm) High tool capacity: chain magazine for 90 milling / 30 turning tools (ISO 50 CAT taper) Capacity & dimensions: Max swing over bed: 710 mm Max swing over cross slide: 520 mm Swing range depending on Y-axis position: 310–710 mm Distance between centers: 1,500 mm Max workpiece weight (incl. chuck): 400 kg chuck work / 1,500 kg shaft work Machine weight: 14,500 kg Main spindle & C-axis: Spindle speed: 5–3,000 rpm (stepless, 4 speed ranges) Main motor (AC): 30 kW (30 min) / 22 kW (continuous) Max torque: 314 kpm (approx. 3,080 Nm) C-axis indexing: 0.001° Turret, axis travels & rapid traverse: Turret swivel (B-axis): 210°, indexing 0.001° Travels: X 680 mm · Z 1,612 mm · Y ±105 mm Rapid traverse: X 12 m/min · Z 15 m/min · Y 10 m/min Z-axis feed force: 2,840 kp max (approx. 27.9 kN) / 1,150 kp continuous (approx. 11.3 kN) Tool shank: OD turning 25 × 25 × 150 mm / boring bar Ø50 mm Milling spindle & live tooling: Speed range: 18–6,000 rpm Milling motor (AC): 15 kW (30 min) Tool taper: ISO 50 CAT Automatic tool changer (ATC): Type: chain magazine Capacity: 90 milling tools / 30 turning tools Max tool diameter: 120 mm Max tool length: 460 mm Turning tool length (using B-axis): 165 mm Max tool weight: 20 kg Fodpfszugfyex Aatepl Tailstock: Type: programmable quill and body Quill travel: 130 mm Quill diameter: 130 mm Quill taper: MT 5 (MK 5) Max clamping force: 1,500 kp (approx. 14.7 kN)

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Fjdpfx Aaozh Uwqotjpl Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, total width: 2,750 mm, total length: 1,950 mm, total height: 1,750 mm, grinding diameter: 250 mm, Machine complete with filter unit and documentation. Grinding diameter (maximum workpiece Ø): 250 mm. Centre distance / maximum grinding length: 750 mm. Grinding wheel (max. size): 400 × 40 × 127 mm. Grinding spindle motor power: 5 kW. Grinding wheel speeds: approx. 2140 / 2640 rpm. Workpiece mounting: between centres, tailstock; suitable for external cylindrical grinding. Dimensions (L / W / H, approx.): 2750 mm / 1950 mm / 1750 mm. Machine weight: approx. 3.9 t (≈ 3900 kg). Fpsdpfoxz Tvxsx Aatol

Condition: good (used), functionality: fully functional, spindle bore: 56 mm, turning diameter: 460 mm, JESSEY 1850 ENC CNC Teach-In Lathe — For Sale Reliable Taiwanese-built teach-in CNC lathe equipped with an Anilam 4200T control. Ideal for both manual and programmed turning operations, well suited for workshops that need the flexibility of conventional turning combined with full CNC capability for repeat work. Key features Fodsy Hmilepfx Aatopl - Anilam 4200T CNC control with Teach-In mode - Heavy-duty spindle with generous bar capacity - Long bed for shaft and large-component work - Tailstock included Technical specifications CNC control: Anilam 4200T Distance between centres (turning length): 1250 mm Swing over bed: 460 mm Max. turning diameter: 460 mm Spindle bore (bar capacity): 56 mm Spindle motor power: 7.5 kW Max. spindle speed: 1800 rpm Tailstock: Yes

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D Fpsdpfx Aaszpf I Aetol -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Largest distance between centers: 950 mm Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Fpedpfxsw Nn Akj Aatel Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately