Used Tapping Center for sale (13,345)

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm Kwsdpfxsxq R E Nj Abcsw T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Kodsxtfz Dopfx Abcsww Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: Kodpfx Absyigalscjww - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. weight of the machine ca. 7,4 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation Kwedpfoytybyex Abcew - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector Kjdpjxcp R Uofx Abcoww - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Kedpfx Ajvlnvrobcjww

Condition: good (used), Year of construction: 2012, Control Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (x/y/z) Table diameter: 630 x 630 mm Table load: 700 kg Workpiece diameter - max.: 900 mm Rotary table (A-/B-axis) Ksdpfx Absrx N Tzocsww A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system - Motor spindle: 16,000 rpm Drive power: 25/35 kw Max. Torque: 160/223 Nm Spindle holder: HSK-A63 Tool changer: 120-position - Measuring probe - Kinematics package - Tool length checking device - BLUM laser measuring system Tool monitoring - electric handwheel - Suction - 80 bar IKZ system

Condition: good (used), Year of construction: 2007, IKZ, direct path measuring system, 3D probe preparation (without probe), chip conveyor, Kwodpfx Abjw U N Urecow approx. 18,500 power-on hours, approx. 500 spindle hours Technical details Travel - x 1000 mm Travel - y 500 mm Travel - z 610 mm Speed range 8000 rpm Weight 5.5 t Control HEIDENHAIN iTNC 530 Tool changer 24 positions Tool holder SK 40 Table size 1,200 x 500 mm Max. table load 850 kg Total connected load 37 kW Space requirement approx. LxWxH 2.65 x 2.1 x 2.9

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Kjdpfegydn Isx Abcjww Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: good (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: X-axis: 630 mm Kwodpfxer Drcme Abcsw Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Kwodpfjiv R Hlex Abcow Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Ksdpfxev Drigj Abcoww Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: excellent (used), Brother Speedio S700X1 Year of manufacture: 04 - 2017 Control: - Brother CNC - Electronic handwheel Main spindle: - Maximum spindle speed: 16,000 rpm - Tool holder: BBT 30 Tool changer: - Magazine with 21 stations Travel paths: - X-axis: 700 mm - Y-axis: 400 mm - Z-axis: 300 mm Table: - 800 x 400 mm Availability: - Immediately Internal coolant supply (IKZ): Yes (defective) Documentation/machine manuals are available. Kedeyv Axuopfx Abcoww The machine has very low operating hours, approx. 5,000 h. Special features: - The machine is ready for immediate use. - The machine is available on short notice. - The machine can be inspected and tested under power on site. - The machine will be loaded onto the truck free of charge. - Forklift for loading is available. - Transport can be organized upon request.

Condition: used, Year of construction: 1977, centre height 200 mm centre distance 1.000 mm spindle turning speed range 1600 U/min spindle bore 42 mm turning length 1600 mm turning diameter over bed 410 mm 230 mm machine weight ab. 1.700 kg Kedpfx Aeyv N Rkobcsww dimensions 2000 × 1000 × 1500 mm

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 400 mm z-travel 400 mm Kodsyv N Hfspfx Abcsww Spindle Speed 4.000 U/min. table surface area 800 x 425 mm tool taper SK 40 feed 2.000 mm/min total power requirement 5 kW machine weight ab. 2.000 kg

Condition: used, turning diameter over bed 330 mm centre distance 650 mm Kwedpfxoyv N Nyj Abcew spindle bore 36 mm weight of the machine ca. 600 kg

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm Turning diameter over slide 170 mm centre height 220 mm centre distance 1600 mm Spindle Speed 25-1320 UpM spindle bore 75 mm tailstock quill taper MT 4 Kwedpfjyv Nrhjx Abcew weight of the machine ca. 2025 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, Make: DECKEL MAHO Type of machine: DMC 104 V linear Year of manufacture: 2003 Control system: Heidenhain TNC 530 Kwjdpoui Tuwsfx Abcew Tool holder: SK40 x-travel: 1040mm y-travel: 600mm z-travel: 500mm Speed range: 12.000 min-1 max. Table load: 800 kg Table dimensions: 1250x600 mm Number of tools in the magazine: 30 Stk.

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Kwedpfx Ajxz Rdajbcsw Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: new, Precision center lathe and feed spindle lathe Make: OPTiturn Model: TM 4010 D Item no.: 3403045 Condition: New machine Center height: 200 mm Center width: 1.000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with - 3-axis digital readout DPA 31 PLUS - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused Kwodjilup Nepfx Abcjw - Oil filling - Operating tool - Operating instructions

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 810D Poweline, table width: 560 mm, table length: 790 mm, overall weight: 3,850 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,650 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Well-maintained DMG 635V Ecoline machining center with only approximately 2,650 spindle hours. Year of manufacture: 2013 Travel paths: X: 635 mm Y: 510 mm Z: 460 mm Equipment: Control: Siemens 810D Powerline electric handwheel chip conveyor coolant system electrical cabinet cooling tool changer: 20 positions spindle speed: 8,000 rpm spindle taper: SK40 Machine available immediately! Ksdpfx Absyigf Ujceww Machine can be inspected under power! Transport can be organized upon request!

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t dimension coolant device: 1,7 x 0,7 x 1,35 m dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Hydraulic unit Kwjdpfx Aevhbpdebcjw Coolant preparation system Rittal cooling system on the control cabinet Work area Interior lighting *

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Kwodpox Hllxsfx Abcow Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2014, operating hours: 4,684 h, functionality: fully functional, Controller NCT201 Table size: 950 x 500 mm Maximum workpiece weight: 500 kgs Travel: X 850 mm Travel: Y 510 mm Travel: Z 510 mm 16-position tool changer Spindle taper: SK40 Motor spindle speed: 20 – 10 000 rpm Machine weight: 5,200 kgs Machine dimensions: 2900 x 2330 x 2685 mm Equipment, accessories - Electronic handwheel - 3D touch probe - Several tool holders - Operating manual Kjdpfx Absyr Ildecoww Very good condition.

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle Kwsdpfxoyv Ewge Abcsw with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler