Used Tb Sprint 303 for sale (3,303)

Condition: used, Year of construction: 2005, operating hours: 2,583 h, Equipment: all wheel drive, Telescopic Work Platform, 4x4 All-Wheel Drive, Snorkelift, Working Height 40.4 m Not Operational! Ncsdpfx Aqjyq Aklsvet Snorkelift, * Model: TB-126JCU * Working height: 40.4 m * Platform height: 38.4 m * Lateral outreach: 20.7 m * Year of manufacture: 2005 * Hour meter: 2,583 (read value) * 4-telescopic steel construction * Powered by 4-cylinder Cummins diesel engine * 1 driving gear * Tire size: 18-22.5 * Tread depth: 22-24 mm * Wheelbase: 3,700 mm * Drive configuration: 4x4 * Overall dimensions: 15,000 x 2,700 x 3,050 mm * Axle extension: 3,900 mm * Weight: 19,119 kg * Basket load capacity: 227 kg * Rotating basket * Basket made of aluminum construction * Hydraulic basket arm: 1,950 mm * Basket dimensions (L x W x H): 2,360 x 520 x 1,100 mm * Basket and ground controls * Machine not operational, basket arm is functional, machine drives, boom is non-functional, electrical fault * Loading facilities available Further data and additional photos are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee on all information provided. You are welcome to visit our homepage.

Condition: refurbished (used), We offer repair and replacement services for all types of Heidenhain measuring systems: LS 803, LS 903, LS 303, LS 403, LS 501, LS 503, LS 603, LS 703, LS 106, LS 186, LS 706 LB 325, LB 326, LB 301, LB 381, LB 382 LC 481, LC 483, LC 485, LC 181, LC 183, LC 185 Scanning units can also be repaired or replaced individually. Many measuring systems are available for immediate exchange. Ncodpfxsq Sahno Aqvst Please inquire about your required type.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 89061, overall weight: 130 kg, Needles: 18 Nodpfxsyu Sw Nj Aqvjct Controller: T8-2 control unit Thread trimmer: integrated Embroidery speed: max. 1,200 stitches/min Max. embroidery area: 310 x 460 mm Scope of delivery: - Software-controlled electronic T8 control - Thread trimming device - Light barrier - Cross laser - 1 x tubular frame holder - 1 x border frame 460 x 310 mm

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 89104, overall weight: 130 kg, Needles: 18 Embroidery speed: max. 1,200 stitches/min Maximum embroidery area: 310 x 460 mm 18-needle universal bridge embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, fully equipped for immediate operation: Control: T8-2 operating unit Thread trimmer: integrated Embroidery speed: max. 1,200 stitches/min (standard/free arm), max. 1,000 stitches/min (cap) Embroidery area (D x W): 310 x 460 mm (single motifs), 300 x 400 mm (tubular goods), 70 x 360 mm (caps) Depending on frame type and cap shape Electrical data: single-phase AC 230 V, 50 Hz Nedpfxjyu St Ds Aqvect Scope of delivery: - Software-based electronic T8 control - Thread trimming device - Light barrier - Crosshair laser - 1 x free-arm frame holder - 1 x border frame 460 x 310 mm - 1 x cap frame drive - 2 x cap frames 360 mm - 1 x clamping aid for cap frame

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm With swivel table for diagonal cut Ncsdpfoucnt Hex Aqvet disassembled from our warehouse in 23936 Grevesmühlen

Condition: new, Year of construction: 2026, Standard equipment: - Robust, high-quality, inclined rotation hood for easy reading of the speed - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control - Connection cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical interlock - Thermal overload protection - Emergency stop push button Weight in kg: 44 Motor power kW: 0.45 Single-phase 230 V Speed rpm: 250–3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Throat 220 mm - Column diameter 70 mm - Usable table surface (W x D) 300 x 250 mm - T-slot size: 2 slots, distance 100 mm, slot dimensions width 14/26 mm - Spindle taper B16 - Speed display: Digital Ncedoihipzepfx Aqvst - Drilling depth display: Scale - Drilling depth stop: Quick-adjust stop ring - Feed: Manual Option DRILLING PACKAGE 1 – Price: €272 – Vice [felix] 2.0 80 – Quick-release drill chuck B16 1–13 mm (accuracy 0.17 mm) - FACTORY WARRANTY: 3 years - Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! CALL AND REQUEST A QUOTE!

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Ncsdpfx Aqsw Nvkiovet

Condition: used, Year of construction: 1980, functionality: fully functional, Canali Band Saw TB 1100 Manufacturer: Canali Germany Year of manufacture: 1980 Band Saw with center cut centering Roll diameter: 1100 mm Max. saw blade width: 100 mm Roll width: 90 mm Max. saw blade length: 6800 mm Min. saw blade width: 6500 mm Ncsdpfev Ny S Tex Aqvjt Main motor: 22 kW Infeed device tilt adjustment: 0-45 ° Feed speed: 0-30 m/min Feed chain height: 300 mm For center cut, clearance width: 300 mm To the left of the saw blade: 150 mm Saw blade tension: manual 400 V / 50 Hz Weight: 3500 kg Technical specifications subject to change

Condition: new, Universally applicable bending machine for metalworking and repair shops. Working length: 1270 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width: 45 mm Bending angle: 0 - 135° Width: 1620 mm Depth*: 1115 mm Height: 1150 mm Weight approx.: 340 kg * with back stop Features: - Universally applicable bending machine for metalworking and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using the foot pedal, hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Fast and easy bending process using the bow handle - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Nsdpfx Aevnrk Eeqvjct Scope of delivery: - Segmented Upper beam - Back stop - Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 10900 € 209.28 € 60 mm 595 mm 363 mm 900 mm 130 kg 10.5 cm³ 60 x 3 mm 2"Gas x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 4 mm 60 x 4 mm 64 x 4 mm 64 x 4 mm 60 x 4 mm 50 x 4 mm 35 mm 60x30x4 stehend, 60x40x5 mm 300 mm 10 mm 10 mm 1,25 / 2,50 U/min 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds Ncjdpfxowirxks Aqvet overload protection mobile by rolls and handle tools not included

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 12460 € 239.23 € 60 mm 500 mm 760 mm 1000 mm 186 kg 10 cm³ 60 x 4 mm 2" x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 3 mm 60 x 6 mm 64 x 6 mm Ncodowiru Sepfx Aqvst 64 x 6 mm 63 x 4 mm 50 x 4 mm 35 mm 35 x 35 mm 60 x 20 stehend, 60 x 35 mm 380 mm 10 mm 10 mm 1,5 / 3 U/min 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request

Condition: good (used), Year of construction: 2015, lifting height: 20,400 mm, fuel type: diesel, Empty weight: 3.460 kg Lifting capacity: 200 kg Working height: 2.240 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 7,25x2,1x3,01 Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2015 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,00 m Total dimensions LxWxH: 7,25 x 2,10 x 3,01 m Platform dimensions LxW: 1,38 x 0,68 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,25 m Support width vertical: 2,10 m (vorne) / 2,10 m (hinten) Ncsdpoxbq E Defx Aqvjt Support width one side: 2,78 m (vorne) / 2,75 m (hinten) Support width both sides: 3,48 m (vorne) / 3,33 m (hinten) Support length: 3,95 m breit/ 2,98 m schmal Own weight: 3.460 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, maximum tilt angle 5°, loading area with side boards, automatic return to base position, lift automatic. Information: Tüv and UVV new Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2015, lifting height: 27,900 mm, fuel type: diesel, color: white, Weights Empty weight: 3.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.690 cm Make of bodywork: Nissan CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1620 m Transport dimensions (LxWxH): 6,84x2,2x2,99 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 270.2 Year of build: 2015 Condition: Used Data: Max. working height: 26,85 m Max. platform height: 24,85 m Max. reach: 16,25 m Nedpfxsv Tklre Aqvjct Total dimensions LxWxH: 6,84 x 2,20 x 2,99 m Platform dimensions LxW: 1,37 x 0,68 m Max. basket load: 230kg Swivel range: 2 x 225° Ground pressure: 31/21kN Ground clearance: 0,16 m Support width vertical: 2,20 m Support width one side: 2,84 m (in front)/ 2,94 m (rear Support width both sides: 3,51 m(in front)/ 3,66 m (rear) Support length: 4,14 m broad/ 3,12 m narrow Own weight: 3.300 kg Special features: Rotating work basket (2 x 85°), Socket in the work basket Request, engine On/off switch in the work basket, earthing possible, Automatic setup and retraction, memory function, tail lift. TÜV and UVV new Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2016, lifting height: 20,400 mm, General information Mileage: 126.116 km Weights Empty weight: 3.260 kg Functional Lifting capacity: 200 kg Working height: 2.240 cm Working width: 352 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Nsdsxrtbpspfx Aqvoct TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1420 m Max swing of arm in degrees: 225 Transport dimensions (LxWxH): 6,47x2,12x3 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2016 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,18 m Total dimensions LxWxH: 6,47 x 2,12 x 3,00 m Platform dimensions LxW: 1,37 x 0,66 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,16 m Support width vertical: 2,12 m (vorne) / 2,12 m (hinten) Support width one side: 2,82 m (vorne) / 2,73 m (hinten) Support width both sides: 3,52 m (vorne) / 3,34 m (hinten) Support length: 4,15 m breit/ 3,19 m schmal Own weight: 3.260 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x55°, maximum setup tilt 5°, loading area with tailgate 1.05 x 2.13 m. Information: Tüv and UVV new Location: 41468 Neuss: immediately available

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Nodpfsx Eilqjx Aqvoct Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Year of construction: 2018, condition: good (used), Vehicle description TAKEUCHI TB 225 mini excavator YEAR OF MANUFACTURE 2018 Ncsdendk Iwepfx Aqvst acc. Counter 2,547 hours 2,400 KG 16.5 KW - hydr. quick coupler - 2 backhoe buckets + new hydr. slope bucket! - hydr. adjustable undercarriage - Cabin with heating - working lights - Nice and good excavator - original paint - Good chains Selling price: 29.950,-- net Also favorable delivery possible!

Condition: good (used), Year of construction: 2016, operating hours: 6,366 h, Vehicle description TAKEUCHI TB 260 mini excavator midi excavator Year 2016 acc. Counter 6.366 hours 32.4 KW 5,735 KG - hydr. quick coupler - all lines - 2 buckets - new hydr. slope bucket !!! - climate - additional headlights - tinted windows Nsdpfx Aqsrynu Esvsct - ready for immediate use - little play on bolts and bushes selling price: 36.900,-- net also favorable delivery possible!

Condition: good (used), Year of construction: 2017, operating hours: 8,760 h, Vehicle description TAKEUCHI TB 2150 tracked excavator Year 2017 acc. Counter 8.760 hours 85 KW 15.075 KG - hydr. quick coupler - Backhoe bucket - Slope bucket NEW - hydr. swivel arm - hydr. quick coupler - hydr. dozer blade - electr. tank pump Ncodjugf U Aopfx Aqvot - ready for immediate use - 270cm width Sales price: 54.900,-- net also favorable delivery possible!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 82632, overall weight: 90 kg, 12-needle universal gantry embroidery machine for single motif and border embroidery, as well as tubular fabric and cap embroidery, fully equipped for ready-to-use operation: Nedpfxsyrqywe Aqvect Control unit: T8-2 control panel Thread cutter: integrated Embroidery speed: max. 1,200 stitches/min (standard/free arm), max. 1,000 stitches/min (cap) Embroidery area (D x W): 310 x 460 mm (single motifs), 300 x 400 mm (tubular goods), 70 x 360 mm (caps), depending on frame type and cap form Power supply: single-phase AC 230 V, 50 Hz Scope of delivery: - Software-orientated electronic T8 control unit - Thread trimming device - Light barrier - Cross laser - 1 free-arm frame holder - 1 cap frame drive unit - 2 cap frames 360 mm incl. clamping aid - 1 border frame 460 x 310 mm

Condition: new, Technical data for the pallet rack traverse: Shelving system: Mecalux The scope of delivery includes: Njdovvifpopfx Aqvect 01x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg, with evenly distributed load 02x integrated locking pin, new To secure the longitudinal beams against accidental lifting Currently available in stock: approx. 404 pieces Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Nsdpfx Aqox Srklovjct Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Ncedjvvx Hiepfx Aqvjt Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Njdpfxevgbcue Aqvjct Machine is in working condition but needs a specialist that can do some refurbishments. Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) Njdpfsby Stpsx Aqvjct - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm SOURCE: IPG Fiber 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 13000 Kg Nsdpfexcqrgex Aqvoct