Used Teka Filtoo for sale (30)

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg Prsdpfx Aoz A Thnsirsc

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Predpfx Asv Taq Roirjc Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m Prodpfxsfrzt Uo Airjc

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) Podpfx Aiokm Rynerjrc 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- Pedpfx Aehp S Trjirjrc A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.