Used Tempering Furnace for sale (929)

Year of construction: 2022, condition: new, El. heated chamber furnace type: VEI_KO_EB Knsdehlp U Dopfx Aanjf max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Kedpfx Aoiryyaeansnf Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: new, Year of construction: 2025, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL Knsdpfxjfhv Tcs Aanof 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Kedpfxshz D Iwo Aanjnf MARCELS MASCHINEN AG

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Kedpfext Rmlox Aanonf

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Min. glass size: 200 x 400 mm Glass thickness: 4 - 19 mm Ksdpfx Aajik E Sronjnf Start-Up: 2018

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Kedjxcb Hnepfx Aanjnf

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Kedpfexurpwex Aanonf Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2016, condition: new, heated length: 4000 mm Kodpfxecdizfo Aanjnf conveyor belt width: 900 mm temperature: max. 950 ° C

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° Kodsvhazfepfx Aanenf MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Knjdpfx Aaoxur Ndjnjf Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm KW: 814,5 Dimensions: length = 22 m, width = 7 m Kedpfjipx Dysx Aanenf

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Knsdpfx Aaext Habonsf

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Kjdod I T Exepfx Aanonf For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, El. heated chamber furnace, make VEI Kedpfx Aaeipvgionenf type: VEI_KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Knsdpfx Aow Nnqueanef

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons. Knodshgkdqjpfx Aanof

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Knodoxnpw Eepfx Aanef Good working condition. Please check out our other listings as well.

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Kjdpegtxuqjfx Aanonf Temperature up to 1150 c

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm depth 155 cm height 192 cm Nabertherm C40 controller Kodpjvrg Slsfx Aanjnf

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm Kedpjcmr D Hsfx Aanenf internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Wiesheu furnace for sale. 8+4 tray design, with 2 loading trolleys, own extractor hood. Continuously serviced by brand service. Knsdpfxjuxfmls Aansf

Condition: ready for operation (used), Electric furnace REAG – 10 kW | 290V | 17.5A I will sell an industrial electric furnace from the renowned Italian company Reag, designed for applications requiring high temperatures, such as heat treatment of metals, firing ceramics, glass processing or laboratory work. Technical data: Power: 10 kW Voltage: 290V Current: 17.5A Connection system: Star (Y) Serial number: 1796 Manufacturer: Reag (Italy) Condition and use: Kedjv Drpyepfx Aanjnf The furnace is in good technical condition, fully functional and ready to work. It was used as intended in industrial conditions.

Year of construction: 1969, condition: used, Technical data: Power: 2.2 kW Connection: 220 V Dimensions: Frame (WxDxH), approx.: 310 cx 355 x 755 mm Knjdpfeu Atiiox Aansf Oven (WxDxH), approx.: 370 x 550 x 400 mm Oven interior (WxDxH), approx.: 180 x 23.5 x 120 mm Equipment: - Various tongs

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Knedpfxexciuge Aanjf Dimensions (L x W x H): 790 x 670 x 520 mm Weight: approx. 60 kg Good condition