Used Tempering Furnace for sale (1,166)

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Hnsdpfxeq Ttz Ee Aiyel

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Hjdpfx Aspcgzgeiysnl

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Hsdjwtfiqopfx Aiysnl Heating system: electric with forced convection Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Condition: new, Year of construction: 2025, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Hedpspn Nyzsfx Aiyonl Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year of Manufacture 2020 – Like New Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium sulphate system Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is a nearly new LEP13.2 tempering unit in pharmaceutical GMP-compliant design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air pressure: 6 bar Hnjdpsyl Na Njfx Aiyjl Pressure and leak testing performed FAT successfully completed MAIN COMPONENTS 2x KSB Movitec centrifugal pumps Alfa Laval plate heat exchanger Electric instantaneous water heater Reflex expansion vessel Samson control valve GEMÜ ball valves (manual & pneumatic) Labom pressure gauges Comprehensive sensors & measuring instruments Insulated pipework Stainless steel skid frame construction APPLICATIONS Temperature control of process media Use in GMP-regulated production areas Pharmaceutical and biotechnology plants Media circuits with temperature control CONSTRUCTION Compact, closed skid unit Fully piped Professionally insulated piping High-quality industrial components Service-friendly layout Completely dismountable and transportable CONDITION Condition: New, original packaging Year of manufacture: 2020 Project-specific unit Hardly any operating hours Visually and technically in excellent condition DOCUMENTATION FAT documentation Pressure test certificates P&ID diagrams Layout drawings Factory certificates according to EN10204 Materials lists EU declarations of conformity FEATURES Complete GMP documentation High-quality brand components Ideal for pharmaceutical and biotech applications Immediately available Significantly below new price

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Hnodoyl Ipcjpfx Aiyjl Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events Hnedpofz U Tqofx Aiyol It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Hnjdpjfy Txyofx Aiyol Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Hnodpfx Aijfzkqmjyel History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg Hnedecdi R Ejpfx Aiyol

Condition: new, Year of construction: 2025, Powder coating oven The oven is designed for drying elements painted with water-based and solvent-based varnishes. Working dimensions (mm): 1500 (w) x 4000 (d) x 2000 (h) Technical data: • Power consumption: 59 kW. Equipment: • Top transport, • Touch control panel, • Hot air circulation (Equal temperature throughout the furnace, acceleration of the workpiece heating process), • Locks for safe opening and closing, Hsdog Ib Epjpfx Aiysnl • Time module, • Thermoregulator (controls the temperature inside and maintains it at an appropriate level), • The oven is equipped with rails for easy transport. • Maximum working temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Hnjdpfjpkwhqjx Aiyol Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: new, Year of construction: 2025, Firing chamber output: 49 kW Working power: 45 kW New appliance, original packaging: yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 200 mm with freely rotatable plug-in bends Smoke outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air flow : 3500 m³/h Power consumption: 550 W designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without hot air conveying pipes: 1750 mm Oven width: 700 Hnsdpfok Utrdox Aiyol Oven length without flue gas fan: 1150 Weight: 305 kg

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Hnsdpfx Aexp Rbhoiyjl

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Hnsdpfx Aijyfv N Royjl

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Hsdpfx Aewkiipeiyjnl

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Hnodovxvgropfx Aiyjl

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Hjdpow Igvtjfx Aiyenl

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Hodpfxsygw S Aj Aiyjnl

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Hedpfx Aioxt Rmljyonl

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Hodjtxb Avspfx Aiyonl

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Hnodpfx Aiew Emyzjyjl

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Hnedpfx Aetxb Apoiyol

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Hnjdpfxetndwuj Aiyel

Condition: excellent (used), max. temperature 1200 Grad size of opening 220 x 120 mm depth of chamber 400 mm Hjdpfexcbldsx Aiyonl dimensions of the machine ca. 1,4 x 1,2 x 1,6 m