Used Tester for sale (179)

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Kdedpfx Ajwwrxasbcei Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Professional Mitutoyo surface roughness tester designed for precise measurements in quality control, measurement laboratories, and in manufacturing environments. This is an industrial metrology-grade device, widely used in the automotive sector, CNC machining, toolrooms, and metalworking facilities. The 178-562-11D model enables fast and repeatable measurement of roughness parameters in compliance with current standards. Robust construction, intuitive operation, and high measurement accuracy are features for which the Mitutoyo brand is known. Technical condition: used, fully functional Visual condition: very good (as shown in the photos) Power supply: rechargeable battery Manufacturer: Mitutoyo (Japan) Included: • Mitutoyo 178-562-11D surface roughness tester Kdjdpfoyc Rwdsx Abcei • Transport case • Full set exactly as shown in the pictures

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction Kjdpfoyc H I Sox Abcsdi —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: not inspected (used), functionality: unexamined, table diameter: 50 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 04.05.26 and 07.05.26. Kodpsyr Rqcofx Abcjdi TECHNICAL DETAILS Diameter of support surface: 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 200 x 650 mm Machine weight: 100 kg External reference: Lot 85

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: SN 552000000, GH hardening machine Hardening machine 9 Kdodpfxox Eyqme Abcoi Serial No.: 55200000 Year of manufacture: 1999 Power: 65 kW Generator output: 50 kW Generator voltage: 400 V Frequency: 100–200 kHz Roller diameter: 12–29 mm Control: Sinumerik 840D Parts feed Conveyor belt for parts removal

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Kodpfx Abjvbwziocsdi Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Kdodpfx Asf Axn Aebcsi Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Kedjd Dc Unjpfx Abcedi Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials Kdsdpfx Aoytrufebcji The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Kdodpfxoytn Hko Abcei Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 Kdedeu N Avxepfx Abcei voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale! Kdsdpfoxwdxcex Abcei

Condition: used, Stationary hardness testing machine Hardness tester The hardness tester can be used manually with a template. The device is compatible with software, for data protection reasons the hard disk with software has been removed. Device is sold without software. Retrofit hardness tester Briviskop BL 3: HMEWin-Compact consisting of : 3.900,00 € -Pc with integrated touch screen -HMEWin-Touch Basis software - Hub with 12-pin connection for measuring system -Complete support system for the machine stand. Working time for retrofitting, commissioning, € 1,100.00 Calibration and instruction of employees approx. For more technical data, see type plate. You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Kedpfx Ajrfwynobcedi Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-1, overall weight: 400 kg, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is an automated leak testing system from the renowned manufacturer Zeltwanger. The F56BEV system is designed for precise and reproducible leak and tightness testing in industrial production environments, making it ideal for both serial and random-sample inspections. Technical Data: Manufacturer: Zeltwanger Type / Model: Leak Testing System F56BEV Project No.: 51720166 Machine Number: 51720166-1 Year of Manufacture: 2018 CE Marking: Present Electrical Data: Connection: 230 V / 1~ / 50 Hz Max. Fuse Protection: 16 A Max. Power Consumption: 10 A Power Input: 0.5 kW Supply Line: 3 × 1.5 mm² Control Voltage: 24 V DC Mechanical / Pneumatic Data: Machine Weight: approx. 400 kg Pneumatic Supply: min. 5 bar (oil-free compressed air) Kedpfoydl Dnex Abcodi Advantages & Features: High-precision leak and tightness testing Robust industrial-grade design Low energy consumption Compact construction Easy integration into existing production lines Proven Zeltwanger quality Typical Applications: Automotive industry & suppliers Plastics and metal processing Medical technology Industrial and special machinery construction Quality assurance / end-of-line testing

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 51720166-2, Zeltwanger Leak Testing System F56BEV – Year of Manufacture 2018 For sale is a high-quality leak testing machine from the renowned manufacturer Zeltwanger, known for precise and reliable testing and automation solutions in industrial applications. The F56BEV system is ideally suited for automated leak testing of components and assemblies, impressing with its compact design, easy integration, and robust industrial construction. Technical data: System designation: Leak testing F56BEV Project No.: 51720166 Machine No.: 51720166-2 Year of manufacture: 2018 CE marking: available Electrical data: Supply voltage: 230 V / 1~ / 50 Hz Max. fuse rating: 16 A I-Max: 10 A Power consumption: 0.5 kW Supply cable: 3 × 1.5 mm² Control voltage: 24 VDC Mechanical / Pneumatic data: Machine weight: approx. 400 kg Pneumatic supply: min. 5 bar (oil-free compressed air) Highlights: - Proven Zeltwanger quality - Ideal for series and single-part testing - Robust industrial construction Kedpfxoydd Uxe Abcjdi - Low power consumption - Compact design - CE compliant Fields of application: - Automotive industry - Supplier industry - Medical technology - Plastics and metal processing - General custom machine engineering

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge Kdjdpfx Absycczujcsi -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge Kdjdpfsyccvfsx Abcoi -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Kdodpfom H Uqkox Abcoi

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery. Kdedpjtvm Smsfx Abcsi

Condition: used, Adixen / Alcatel Alcatel ASM 122D Helium Leak Detector – mobile Kdsdpoyapwksfx Abcei For sale is a professional Adixen / Alcatel ASM 122D helium leak detector from industrial use. This device is designed for highly precise leak detection and leak testing with helium and is used in industrial settings, research, and laboratories. It allows for the detection of extremely small leaks in vacuum systems, pipelines, valves, vessels, and assemblies. The leak detector features an integrated forepump and turbomolecular pump, various operating modes (vacuum / sniffer), as well as a digital display with automatic functions. Technical data (excerpt): Manufacturer: ALCATEL Model: ASM 122D Measurement principle: Helium mass spectrometer Detection limit: up to approx. 1 × 10⁻¹² mbar·l/s Power supply: 200–240 V / 50–60 Hz Power consumption: approx. 800–1200 W Made in France Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) If you have any further questions, please feel free to contact us by phone.

Condition: used, Adixen Adixen ASM 142 Helium Leak Detector Description: Kodpfx Aboyankiscsdi For sale is an Adixen ASM 142 helium leak detector. This device is suitable for highly precise leak detection in vacuum and pressurized systems and is used professionally in industry, laboratories, and research. The ASM 142 is equipped with an integrated turbomolecular pump, various measurement and test modes, as well as a clear digital display of the leak rate. Thanks to its sniffer mode and automatic test cycles, the device offers flexible application possibilities. Highlights: - Very high measurement accuracy - Vacuum and sniffer operation - Graphical & acoustic leak indication - Robust industrial design on casters Technical Data: Test gas: Helium Dimensions: approx. 110 × 60 × 70 cm Detection limit: down to approx. 5 × 10⁻¹² mbar·l/s Power supply: 230 V / 50–60 Hz Power consumption: approx. 1000 W Weight: approx. 100 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and possible errors!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Kdsdpfoycigwjx Abcoi

Condition: ready for operation (used), A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Kjdpfx Abexhnr Uocedi

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Kdsdpoxghn Hefx Abcji

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Kedpoifpg Aofx Abcedi Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!