Used Thermoforming for sale (136)

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Rodpfx Aajylnz Semow

Condition: refurbished (used), Year of construction: 2017, Was overhauled in 2017, with documentation. Rjdpfxswqd Ads Aamow

Condition: ready for operation (used), Capacity: 25 strokes/min, total capacity: 36000 cups/min, filling volume: butter/margarine (hotel portions): 10g, whipped products: 5g, mold dimensions X/Y/Z: 40mm/50mm/20mm. Dimensions X/Y/Z: approx. 5000mm/1500mm/1800mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible. Rodpew Axfdjfx Aamow

Year of construction: 2022, condition: ready for operation (used), A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible. Rodpowt A U Rjfx Aamsw

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder Rsdpjtndpzjfx Aamew with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2025, condition: new, Fully Automatic Thermoforming Machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulds, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, OMRON PLC, touch screen and servo motor, SCHNEIDER relay and air switch. Upper packing materials: heat-sealable films, lower packing materials: thermo-formable, heat seal film, rigid and flexible film is possible. - Specifications: total power: 380V, 13kW; air: 1m³/6bar; vacuum: 0.8-1.0m³/6bar; water: 4 liter/min; max. upper film width: 390mm (practical width 350mm); length per mould: 200mm; max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loding area: standard 1m (optional: additional length); max. speed of the machine in neutral: 6 cycles/min; machine dimensions: L4560xW1020xH1950mm; weight: 1500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Rjdpfx Asv Nkz Ssamow

Year of construction: 2025, condition: new, Fully automatic thermoforming machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food such as sandwiches, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulding tool, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, SMC pneumatic components, DELAT PLC and touch screen. - Specifications: upper packing materials: heat-sealable films, max. film width: 400mm; lower packing materials: thermo-formable, heat seal film (rigid and flexible film is possible), thickness: 300 - 900µm, upper film width: max. 400mm + 2mm, max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loading area: 120cm – 150cm (optional: additional length); max. speed of the machine in neutral: 8 cycles/min; power: 3P, 380V, 50/60Hz; air: 1.2m³/min, 8bar Rodov Nk Acjpfx Aamjw Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Fully automatic thermoforming machine for forming and filling small plastic vials with liquids, creams or pasty products. Specifically designed for use in the pharmaceutical, food or chemical industries. Easily interchangeable modular trays allow the production of vials of different sizes and shapes. Suitable for the production of multiple packs, whose number can be set as needed. Dosing and filling of the filling material is performed by a peristaltic pump, which is characterized by easy operation, cleaning and adjustment. - Specifications: packaging materials: PVC/PE composite film, PET/PVDC as environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for e.g. pesticide packaging; packaging thickness: 0.25-0.35mm; max. roll outer diameter: 400mm with standard core (70-76mm); max. drawing depth on one side: 12.5mm; max. molding surface: 120mmx210mm; vial height: 58~108mm; filling range: 1~50ml/vial; max. speed of the machine in neutral: 25 cycles/minute; power supply: 380V, 50Hz; power consumption: 17.5kW; compressed air and consumption: 6bar, 400L/min; cooling water: temperature 14~180°C, pressure 1.5~2bar, closed circuit 6L/min; machine dimensions: L7200xW960xH1800mm; weight: 2200kg. Rsdov Nk Aiopfx Aamow Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Rjdpfx Ajxm Sa Heamsw Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Year of construction: 2018, condition: used, Multivac R270CD with skin pack and MAP pack. Overhauled in 2018, this machine came out of production week 37 2024. Machine comes with several moulds, spares and with 3 vacuum pumps incl. - Booster pump Redouk Sp Nspfx Aamsw - Busch R5 360m3/h - Busch R5 100m3/h Only 668 production hours, everything build in. Good to go for production. Dimensions from all the tooling is in the photo album

Condition: good (used), Webomatic APS ML 7100 thermoformer Rsdpfx Aaeqmndcomow The APS ML 7100 is the ideal tool for the industrial serial production of superior thermoformed packages. Even bigger dimensions enable the realisation of more flexible packaging! Our high-end solution can use all film materials common in trade up to 620 mm width with a repeat length of up to 800 mm: Depending on the product requirement and the client’s specification the APS ML 7100 can use soft film and rigid film materials, also printed top and bottom film as well as stable or reclosable packages. Equipped with two separate stainless steel lifting systems with adjustable opening width, the modular APS ML 7100 is extremely flexible in length and width: This industrial solution does not only offer an extra long filling area for the comfortable fully automatic filling process, but also a flexible cutting area for the optional punching, printing, labelling. This machine will be shipped with 1 tool: 2×1: Traysize 385×285 (variable depth with a max. of 190mm) Brand: Webomatic Model: APS ML 7100 Year: 2004 (completely refurbished in 2023) Top film width: 600 mm Bottom film width: 620 mm Deep drawing depth: 190 mm Cutt off length: 400 mm Vacuum Pump: Busch 100-132 / Busch WV 500 Power: 21kW / 35A / 400V /50Hz Pressed air connection: 6-12 bar Operational air pressure: 6 bar Machine Dimensions (LxWxH): 7.800x1.300x2.100 mm Machine Weight: 2.600 kg.

Condition: like new (used), Year of construction: 2021, operating hours: 337 h, Multivac R535 Thermoformer The R 535 thermoforming packaging machine is the largest configurable machine system from MULTIVAC. It offers a uniquely wide range of equipment options as well as an extremely high packaging output. Thanks to the unique diversity of the R 535, MULTIVAC is able to meet the most challenging of customer requirements. This R 535 is from 2021 and has only 337 production hours and is in new condition. The machine is including the following equipment: - Bell Mark – IntelliJet TSX 10” Thermal Inkjet Printer; Rodpfx Aasxfq D Uomjw - Chilly 45 chiller Manufacturer: Multivac Model: R535 Year: 2021 Production Hours: 337 Film Width: 645mm (Top)  / 645mm (Bottom) Stroke Length: 500 mm Max. Forming Depth: 75 mm Vacuum Pump: Busch 105m3/h Capacity: Max. 12 cycles/min Machine Dimensions LxWxH: 1.050x175x225 cm Machine Weight: 2.000 kg.

Condition: good (used), Year of construction: 2001, Greiner Thermorunner 4 for polypropylene (PP) and polystyrene (PS). Including heating station, forming station and cooling system. * Punching force: 180000N * Production speed: max. 45 cycl/min * Sheet width min: 150 mm * Sheet width max: 560 mm * Sheet thickness min: 0.3 mm * Sheet thickness max: 2.5 mm This Thermoforming Line is already disassembled and secured for transport (Location: Waalwijk, The Netherlands) Rsdpfon Utzfox Aamjw

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Rjdpfx Aastv Ivzjmow Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Rodpfx Aaot Iracsmjw Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Year of construction: 2012, condition: excellent (used), 1 x Multivac R145 Thermoformer Model: R145 Year: 2012 Tooling measurements in photos. Located in Northern Ireland Redpfx Ajykugfjamjw

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Rjdpfx Asx Uz Ncjamsw Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Year of construction: 2000, condition: ready for operation (used), Model: GEISS U8 (nominal size 1000 × 1500 mm) Sheet size: 1000 × 1500 mm (feed) Max forming area: approx 1460 × 960 mm (subject to verification) Draw depth: ~400 mm Working height: ~1140 mm Rodpoxwp I Njfx Aamew Features: Closed-chamber vacuum forming machine; stepless adjustable clamp frame; integrated vacuum system; cooling fans with water-mist; window plate adjustment; suitable for sheet/roll feed.

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Rjdjybcwtopfx Aamsw Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Ideal for: * Veneering * Form gluing * Laminating Redpfxjzhta Dj Aamjw * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface * Smooth-running swivel casters Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure Rsdpszhtbhofx Aamjw • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Year of construction: 2026, condition: new, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. More future security. The COLUMBUS Pioneer is not just a vacuum press, but a well-designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Form bending * Laminating Rodezhr Uyjpfx Aamjw * Thermoforming * Solid surface materials * Curved and complex workpieces Why choose COLUMBUS? Many businesses discover completely new uses and additional orders within a short time because the Pioneer makes jobs economical that were previously turned down. Your advantages: * Modular system – grows with your business * Lifetime warranty on the machine structure * Heavy-duty industrial construction for decades of use * Columbus 360° included: Practical expertise, master manual, and AI support for maximum application safety * Premium components from BECKER, FESTO and SIEMENS * Simple operation and reproducible results Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin worktop * Smooth-running swivel castors Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Viewing and personal consultation available by appointment.

Year of construction: 2025, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: Redezhr Utepfx Aamow The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Condition: used, Manufacturer: Treif / Variovac Year: 2018 Condition: Used Stock Number: 3346J / 3347J Line is consisting of: Treif slicer Type: Divider 660+ Serial number: 660002.21888.133706 Year of construction: 2018 Cuts: max 2640 RPM Slice thickness: 0.5 - 25 mm Stacking height: up to 100 mm Product size: max 280 x 160 mm Product length: max 850 mm Belt width: 385 mm Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 7.5kW Dimensions: 1900 x 1050 x 2150 mm Weight: 850 kg Including knife holder and tool trolley Treif / Wipotec check weigher Belt width: 345 mm Weighing platform: 400 mm Dimensions: 400 x 1100 x 1050 mm Treif transversal sorter Belt width: 420 mm Dimensions: 700 x 1050 x 1050 mm Treif sorting conveyor Belt width: 420 mm Dimensions: 2300 x 1150 x 1250 mm Rjdpfx Aeyz Sc Toamsw Treif knife sharpener Type: HS-380 Serial number: 243003.61973.105787 Year of construction: 2009 Dimensions: 500 x 900 x 1650 mm Weight: 90 kg Variovac thermoformer Type: Optimus Serial number: 420.OL0707 Year of construction: 2018 Film: rigid film Film width: 420 mm Index: 280 mm Dye: 2 pc. of 232 x 175 mm Vacuum pump: Busch, RA0100F Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 15kW Dimensions: 4200 x 1100 x 1850 mm Weight: 1170 kg

Condition: used, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, Designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat. Total electrical power consumption - 2.5 kW. included: 1.Filler Rjdpfjv R Ttasx Aamsw 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm 3.Screw conveyor Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.