Used Thermoforming for sale (163)

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Ledst Iracepfx Afzsrw Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. Ljdpfx Asrh E Ibjfzsrw The machine is still in production mode, but is available immediately.

Year of construction: 2025, condition: new, Fully Automatic Thermoforming Machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulds, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, OMRON PLC, touch screen and servo motor, SCHNEIDER relay and air switch. Upper packing materials: heat-sealable films, lower packing materials: thermo-formable, heat seal film, rigid and flexible film is possible. - Specifications: total power: 380V, 13kW; air: 1m³/6bar; vacuum: 0.8-1.0m³/6bar; water: 4 liter/min; max. upper film width: 390mm (practical width 350mm); length per mould: 200mm; max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loding area: standard 1m (optional: additional length); max. speed of the machine in neutral: 6 cycles/min; machine dimensions: L4560xW1020xH1950mm; weight: 1500kg. Lodpfx Aov Nkz Sefzorw Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2006, operating hours: 29,750 h, Stations: Forming, Cutting and Stacking Max Forming Area: 500 x 350 mm Min Forming Area: 300 x 160 mm Film width: 540 mm Height of Forming Above-Below Material Level: 100 / 40 mm Max Mould Closing Force: 55 kN Forming Pressure: 2 bar Cycles/Min: 40 Total motor power: 32 kW Total heating power: 44,9 kW Rated current: 115 A Dimensions (L x W x H): 8,3 x 2,3 x 2,5 m Ledjw Rp Eiopfx Afzsrw

Condition: used, Year of construction: 2014, Overview This thermoforming packaging machine, type: Reepack RFM/E40 was built in 2014 in Germany.  The Reepack ReeForm E Series of thermoform fill seal packaging machines feature a stainless steel frame for sanitation in washdown environments. An easy open frame allows quick access to check, adjust, and repair all parts of the machine. Systems are located inside the machine frame, ensuring protection from damage. Technical Details Product Features: Cut-off length: 240 mm Bottom film: 420 mm Product Loading area: 1000mm Free position:5 5 4 4 Thermoforming depth: Max. 120 mm  Air pressure: 6 – 10 bar (600-1200 Nl / min.) Water consumption: 60 – 90 L / h – 1,5 – 2,5 bar (18 – 22°C) Enclosure rating: IP 65 Busch pump 300 Scope of delivery thermoforming packaging machine| Reepack | RFM/E40 | 2014 Ledpfx Aew A R T Hsfzorw

Condition: excellent (used), GEA thermoformer, type: PowerPack NT, year of construction: 2014, foil width: 650 mm, dye: 4 x 3 (156 mm x 190 mm), total dimensions: 14500 mm x 1300 mm x 2800 mm Lrjdpohkr Ddsfx Afzsw GEA PowerGuide Speed inliner, year of construction: 2013, lining 3 to 1, belt width: 830 mm, total dimensions: 2900 mm x 1050 mm x 1300 mm

Year of construction: 1996, condition: ready for operation (used), There are two Thermoforming Machines TETRA LAVAL 3000 available, current: 30A, voltage: 380V, yera of construction machine 1/ 2: 1995/ 1996. Ledpfx Ajgbft Refzsrw

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good Ledpfx Aertq I Eofzsrw The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.

Year of construction: 2025, condition: new, Fully automatic thermoforming machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food such as sandwiches, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulding tool, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, SMC pneumatic components, DELAT PLC and touch screen. - Specifications: upper packing materials: heat-sealable films, max. film width: 400mm; lower packing materials: thermo-formable, heat seal film (rigid and flexible film is possible), thickness: 300 - 900µm, upper film width: max. 400mm + 2mm, max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loading area: 120cm – 150cm (optional: additional length); max. speed of the machine in neutral: 8 cycles/min; power: 3P, 380V, 50/60Hz; air: 1.2m³/min, 8bar Lodpfsv Nk Acjx Afzsrw Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. Lredpfew Rpzqjx Afzsw

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1506, film width: 1,000 mm, type of input current: three-phase, pressure: 6 bar, total width: 700 mm, total length: 1,000 mm, total height: 350 mm, input voltage: 400 V, sheet thickness (max.): 10 mm, heating capacity: 30 kW (40.79 HP), overall weight: 1,500 kg, tool height: 490 mm, Machine type: ILLIG UA 100 G Machine number: 1506 Manufacturing year: 1988 Total weight: approx. 1,5 tonns Lodpfx Afewfdd Dszjrw Power supply: 3x400V Total power consumption: 35 kWh Total (lower and top) heating: 30 kWh Type of the heating plate: ceramic Sheet size max.: 1000x700 mm Sheet size min.: 310x210 mm Sheet thikness max.(manual loading): 12 mm Forming area max: 960x660 mm Forming area min: 270x170 mm Height of formed part positive: 350 mm Height of formed part negative: 350 mm Max. tool height: 490 mm Around 2020, the machine underwent a refurbishment. It received a new Omron control system to replace the original Schleicher, and we also refurbished the cabling and electrical cabinet.

Condition: reconditioned (used), functionality: fully functional, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Drawing depth: 700 mm If you would like further details or a quote, please contact us. Lodpfxjwf Ea Te Afzorw

Year of construction: 1991, condition: ready for operation (used), Draw-off length: 225-320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5300mm, width: 1100mm, height: 2200mm, without tools. Lredpfemn S Hgjx Afzjw

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers Lrodpjwpd Rrjfx Afzjw We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Year of construction: 2025, condition: new, Fully automatic thermoforming machine for forming and filling small plastic vials with liquids, creams or pasty products. Specifically designed for use in the pharmaceutical, food or chemical industries. Easily interchangeable modular trays allow the production of vials of different sizes and shapes. Suitable for the production of multiple packs, whose number can be set as needed. Dosing and filling of the filling material is performed by a peristaltic pump, which is characterized by easy operation, cleaning and adjustment. - Specifications: packaging materials: PVC/PE composite film, PET/PVDC as environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for e.g. pesticide packaging; packaging thickness: 0.25-0.35mm; max. roll outer diameter: 400mm with standard core (70-76mm); max. drawing depth on one side: 12.5mm; max. molding surface: 120mmx210mm; vial height: 58~108mm; filling range: 1~50ml/vial; max. speed of the machine in neutral: 25 cycles/minute; power supply: 380V, 50Hz; power consumption: 17.5kW; compressed air and consumption: 6bar, 400L/min; cooling water: temperature 14~180°C, pressure 1.5~2bar, closed circuit 6L/min; machine dimensions: L7200xW960xH1800mm; weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lrsdpfxev Nk Aij Afzsw

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming Lrjdpfx Afer Nv Icszsw - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Condition: used, functionality: unexamined, For sale here is an Illig Sb 74 D, which is suitable for skinning, blistering not possible. Lredpfx Aowpvbpjfzew Please request technical data.

Year of construction: 1985, condition: ready for operation (used), Max. draw-off length: 320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5500mm, width: 1200mm, height: 2000mm, without tools. Ledemn S Hkspfx Afzorw

Year of construction: 1999, condition: reconditioned (used), functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Lrjdpfx Ajr Ii R Ujfzew Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill - CE conformity with declaration of conformity - Two sets of operating manuals

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Drawing depth: 600 mm Lsdpfjwf Ebwox Afzsrw If you would like further details or a quote, please contact us.

Condition: refurbished (used), Year of construction: 2017, Was overhauled in 2017, with documentation. Lredpfx Afjwqd Adezsw

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Lrodpjwf D S Ujfx Afzow If you would like further details or a quote, please contact us.

Year of construction: 2022, condition: ready for operation (used), A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible. Ledpfx Ajwt A U Rjfzjrw

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Lrsdswf D R Ropfx Afzjw Drawing depth: 600 mm If you would like further details or a quote, please contact us.

Year of construction: 2010, condition: ready for operation (used), Working width: 320mm, max. drawing depth: 70mm, drawing depth adjustment: 5mm, film width bottom film/top film: 355mm/420mm, format size: 1.1-2.1, frame length: 4000mm, number of tracks: 2, machine dimensions X/Y/Z: approx. 4200mm/1100mm/2000mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Ljdjuf Azqjpfx Afzerw