Used This Plate Saw for sale (17,899)

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm Bwedpsu Icp Asfx Afgew plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: floor-plate length: 3000 mm plate width: 1775 mm plate height: 350 mm Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. Bjdpfxeu N Dglo Afgsww *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg Bwjdou N Dg Sspfx Afgow transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1000 mm plate height: 1700 mm Bedpou N Dmlofx Afgjww material thickness: 150 mm weight of the machine ca.: 2300 kg Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands securely on the floor. The plate can be moved via two wheels each. *

Condition: used, Year of construction: 1979, Technical details: floor-plate length: 6400 mm plate width: 1870 mm plate height: 415 mm weight of the machine ca.: 8600 kg transport dimensions LxWxH: 6,4 x 1,9 x 0,42 m Very high quality (no damage) Steel Plate - T-groove DIN 650 - a=36; h=69; b=59; c=25mm; Groove distance= 315mm - included: 26 cover plates Ø 147 x 3mm * Bsdju N Dqdspfx Afgjww

Condition: used, Technical details: Bedpfx Asu N Dr Iefgjww Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm *

Condition: used, Technical details: Bwodpfx Afou N Dy Sjgsw Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm *

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min Bodpfxey Aytvo Afgjww total power requirement 3,4 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Main saw blade projection: 75 mm Bwodpfjx A Tk Esx Afgow No of Grippers: 9

Condition: used, machine/vehicle number: 008583, Max. panel width: 2200 mm Bjdpfxey Stwge Afgjww Max. panel length: 5600 mm Main saw blade projection: 135 mm No of Grippers: 11

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider". Bedpfx Afs Afznuegjww

Condition: excellent (used), Year of construction: 1995, total length: 4,000 mm, overall weight: 5,600 kg, total width: 1,875 mm, total height: 400 mm, T slotted bed plate UNION - DT Cast iron floorplate 4000 x 1900 x 400 mm 2st Floorplate Length: 4000mm Floorplate Width: 1875mm Height: 400mm Bsdpfx Aozc Ihgefgoww No. Of T-slots: 6 Distance from T to T-slot / Jump:315mm T -slot size: 36mm Weight a plate approx.: 5600kg Number of matching pieces: 2 Length: 4000mm Width: 1875mm Height: 400mm Weight: 5600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 03 267989, spindle motor power: 5,100 W, Equipment: saw blade guard, Radial cutoff saw designed for precise cutting of wood, composite materials, and materials with similar properties. The saw's main advantages are its high cutting accuracy, the ability to swivel the guide arm to both sides, and the tilting of the saw head. The smooth operation of the cutting unit is ensured by eight bearings, which are guided at an angle of 45° along steel guides. Max. blade diameter: 400 - 450 mm Cutting height: 125 - 150 mm Arm length: 1100 mm Motor power: 5.14 kW Cast iron arm, swiveling +/- 60° Tilting saw head +/- 45° Rotating head +/- 90° CE safety standard Weight: 375 kg Year of manufacture: 1999 Bwsdezu Rv Aspfx Afgow

Condition: excellent (used), Year of construction: 2000, overall weight: 5,500 kg, total height: 365 mm, total length: 4,500 mm, total width: 1,750 mm, T slotted bed plate STOLLE - RDG Cast iron floorplates 4500 x 1750 x 365 mm (2x) MACH-ID 6452 Make: STOLLE Type: RDG Year: 2000 Floorplate Length: 4500mm Floorplate Width: 1750mm Height: 365mm No. Of T-slots: 5 Bwsdpfx Afozc Idbjgow Distance from T to T-slot / Jump:320mm T -slot size: 36mm Number of matching pieces: 2 Length: 4500mm Width: 1750mm Height: 365mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Year of manufacture: 2011 Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Table size 1500x920mm Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - CE marking present: Yes - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 - Table width [mm]: 900 Bwedpfxez H T U Ao Afgew - Table length [mm]: 1380 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1999, condition: good (used), EWD NKU 300 – Double-arbor resawing circular saw with control cabinet For sale is a used EWD NKU 300 with a control cabinet. This robust double-arbor resawing circular saw is designed for resawing lumber and squared timber. Version with a fixed infeed. Technical data: * Manufacturer: Esterer WD GmbH (EWD) * Type: NKU 300 * Type/Position: 10.1 * Identification No.: 816481 * Year of manufacture according to nameplate: 1999 * Cutting height: up to approx. 305 mm * Saw arbor drives: 2 × 110 kW * Saw arbor speed: 2,400 min⁻¹ * Max. saw blade diameter (top): 620 mm * Max. saw blade diameter (bottom): 560 mm * Feed rate: model series specification up to 80 m/min * Includes control cabinet Further information regarding condition, equipment, and viewing can be provided upon request. Bsdpfx Afo Ahzpgjgeww

Condition: excellent (used), Model: Standard 2 Plus 6220A Bweds Ah Eruepfx Afgsw

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Bwjdpfez Ehvxjx Afgow

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Bjdpfx Aozn N Iksfgeww

Condition: used, Max. saw blade diameter: 450 mm Motor power: 7.5 kW Max. cutting width: 800 mm Carriage length: 5000 mm Saw blade bore: 30 mm Control panel: located at the bottom of the machine housing Height adjustment: hydraulic, via foot lever Swivel adjustment: hydraulic, via foot lever Swivel angle indicator: scale Cutting width indicator: scale Maximum cut length on the crosscut fence: 3200 mm Crosscut fence indicator: scale Crosscut fence design: fixed 90° PSV safety guard: Yes Location: Nattheim Bwjdpfx Ae Af Nu Defgsw

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: fully functional, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Bedszxx Dvopfx Afgoww

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat 240 x 160 mm capacity 60 degrees: round 160 mm capacity 60 degrees: flat 150 x 150 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1200 kg The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic bandsaw of the highest caliber. It has been specifically developed for the high-precision cutting of solid materials, pipes, profiles, and metal bars. Thanks to its extremely robust construction and maximum flexibility, it adapts perfectly to any industrial production process. CNC electro-hydraulic automatic bandsaw featuring: * Automatic mode – for fully automated series production * Semi-automatic mode – for controlled individual cuts Technical Highlights & Industry 4.0 Readiness - Direct control technology: * Makes the sawing machine fully digital, networked, and ready for . Seamless integration into automated production lines - Intuitive 10" touchscreen display: * The completely redesigned user interface minimizes staff training time and . ensures smooth process management. - Integrated cutting library: * Once the material dimensions, type, and thickness are entered, the control . system automatically suggests the best saw blade, the ideal cutting speed, . and the optimal force parameters. The operator, however, retains full manual . control at all times. - IIoT-ready & real-time support: * Real-time data transmission enables predictive maintenance, minimizing . downtime. If necessary, technical support can access the control system . directly via secure remote access—no VPN required. - Future-proof safety: * The machine already complies with the stringent safety and efficiency . standards set for 2027. - Massive data storage: * Capacity for up to 100,000 programs and 9,999 cutting sequences. Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) - MEP CNC "DIRECT" control technology * User interface with an intuitive 10" touchscreen display * Includes mechanical buttons * Ensures reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Swivel-mounted arm for convenient and safe operation * Display and logging of alarms and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts—possible on one side up to 60° - Protective enclosure for operator safety Bodpfx Aj Afzuusfgsww - Infinitely variable adjustment * Cutting speed from 15 to 100 m/min * Controlled via frequency converter (inverter) - Latest-generation hydraulic power unit * Highly efficient with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposing ball bearings * 600 mm single-stroke capacity, repeatable for cutting any desired length - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade suitable for solid and profile materials - Tools and operating manual, including a spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = ± 0.1 mm per feed stroke Information from the manufacturer – please note: If this saw is installed in a system equipped with a residual current device (RCD/GFCI), i...

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW dimension machine xH: 1,2 x 0,9 x 2,2 m Steel and metal band saw with saw band cutting, welding and grinding device Bodev T Th Nspfx Afgsww Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: used, Technical details: Length: 1530 mm Bwjdpfxju Nkiyj Afgjw width: 1180 mm height: 110 mm weight of the machine approx.: 500 kg transport dimensions LxWxH: 1,55x1,18x0,1 m steel plate *

Condition: used, Technical details: Bwjdpfou Nkkkex Afgjw table length: 1000 mm table width: 1000 mm weight of the machine ca.: 0,531 t space requirements of the machine approx.: 1,0x1,0x0,8 m marking plate is on a robust welding construction 60mm steel angle. *