Used Thread Rolling Machine for sale (68,387)

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers Dodjh A S Htjpfx Afpocc - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Djdpfouz If Njx Afpecc Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Dodpfjt Hw N Tox Afpecc dimensions of the machine ca. m

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1974 diameter range: 3-8 mm Dcjdpoxnytqofx Afpjc shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Dodpfx Afexnyrtepecc Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Dsdopwbvkepfx Afpecc

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: M14L/8631, Offer Number: M14L/8631 Dcjdpfowi Swaex Afpec Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW63 Constr. year: 1987/24 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 58 mm output - pieces/min: 250-480 Location: In our warehouse

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M14L/8571, Offer Number: M14L/8571 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: R2LSP Constr. year: 1984 Dcsdpfxewi Sw Hs Afpsc diameter range: 3-8 mm shaft length under head: 150 mm max. thread length: 80 mm output pieces/min: 400 Location: In our warehouse

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/8559, Offer Number: M14L/8559 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1973/92/23 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: In our warehouse Djdpfjwi Sxwjx Afpocc

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8822, Offer Number: M14L/8822 Dcodjwi Ti Ropfx Afpoc Machinetype: thread rolling machine - flat die Make: MENN Type: GW52 Constr. year: 1974 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8630, Offer Number: M14L/8630 Machinetype: thread rolling machine - flat die Dsdpswi Swgefx Afpecc Info: vibratory feeder Make: MENN Type: GW52 Constr. year: 1974/24 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: M14L/8402, Offer Number: M14L/8402 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW83L Dcsdpfxewi S A Ne Afpsc Constr. year: 1987 diameter range: 4-12 mm shaft length under head: 150 mm max. thread length: 105 mm output pieces/min: 80-260 Location: In our warehouse

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: M14L/8133, Offer Number: M14L/8133 Machinetype: thread rolling machine - flat die Info: tube feeder for studs and headless parts Make: PELTZER-EHLERS Type: NKW12-ST8 Dcjdpfxjwi S Ire Afpec Constr. year: 1971 diameter range: 6-12mm shaft length under head: 95 mm max. thread length: 90 mm output pieces/min: 55 Location: In our warehouse

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M14L/8792, Offer Number: M14L/8792 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: ZOM Type: ZVA10 Dedpfowi Tkuex Afpscc Constr. year: 1980 diameter range: 10 mm shaft length under head: 100 mm max. thread length: 65 mm output pieces/min: 180 Location: In our warehouse

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Machinetype: thread rolling machine for nails Make: ENKOTEC Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Djdpfxswm Rtzj Afpscc Location: Germany

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: M14L/8733, Offer Number: M14L/8733 Machinetype: thread rolling machine - flat die Dcedpfxewi Tm Ne Afpjc Info: with washer assembly Make: ZOM Type: ZVA10 Constr. year: 1996 diameter range: 10 mm shaft length under head: 100 mm max. thread length: 65 mm output pieces/min: 180 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/6907, Offer Number: M14L/6907 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MALMEDIE Dcodpfxowi Ta Ne Afpjc Type: AG13 Constr. year: 1970 diameter range: 8-16 mm shaft length under head: 150 mm max. thread length: 83 mm output pieces/min: 120 Location: In our warehouse

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M14L/6106, Offer Number: M14L/6106 Machinetype: thread rolling machine - planetary die Make: SIMA Dcedpfjwi Tbyox Afpsc Type: RAP11 Constr. year: 1983 diameter range: 6-12 mm shaft length under head: 8-75 mm max. thread length: 75 mm output pieces/min: 1000 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Dedpfxjwi Tc Rs Afpjcc Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Machinetype: thread rolling machine - flat die Info: vibratory feeder Dodewi Tmvspfx Afpocc Make: HILGELAND / ZOM Type: TR4L Constr. year: 1976 diameter range: 6-12 mm shaft length under head: 170 mm max. thread length: 102 mm output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Make: HILGELAND Type: FN10/12-80 Constr. year: 2002/2024 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 100-330 Location: In our warehouse Dcodewi T U Tepfx Afpec

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Dcodpfx Aew Nxnwofpec Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Machinetype: thread rolling machine - flat die Info: with washer assembly Dedpfx Afowi Szxspecc Make: HILGELAND Type: FN-6/60 Constr. year: 1990 diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm output - pieces/min: 450 Location: In our warehouse

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: M14L/8196, Offer Number: M14L/8196 Machinetype: thread rolling machine - flat die Make: SASPI Type: GV3-20 Dcodpfowi S Hzox Afpoc Constr. year: 1987 diameter range: 4-12 mm shaft length under head: 150 mm max. thread length: 130 mm output pieces/min: 85-220 Location: In our warehouse

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Dcedowiu Afspfx Afpjc