Used Threading Machine for sale (65,956)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Hsdpfx Aboxytmho Iont Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: used, Thead Roller TLM RP8 TLM TORTONA Year: 1995 Diameter range: 3-8 mm Hnedox Aqprepfx Ab Ijt Shaft length under head: 90 mm Max. thread length: 52 mm Dies size:130/115x54

Condition: new, Hydraulic thread cutting machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Hnsdokhmgiepfx Ab Iet Thread: M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic thread cutting machine Incl. machine base with clamping plate Mobile Hydraulic pressure gauge Stepless speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz Hedpfx Abjh A S Hto Iont - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: ready for operation (used), 1 Threaded-spindle drill press FLOTT NNP 15-II Hsdpji Aputefx Ab Iont without a vise

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts Hsdsxaaa Iopfx Ab Ijnt • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group Hsdpfxjlcbkgs Ab Ijnt - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW Hnodpfszd Hhajx Ab Ist weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: good (used), Threading machine, bench drill, pillar drill Hnodpfxoyvfzws Ab Ist Manufacturer: Hagen

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Hsdpfxetbawkj Ab Ijnt Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1200 Electric Tapping Machine The CORMAK RGE36PWx1200 electric tapping machine is an advanced tool designed for efficient and precise thread cutting in industrial environments. It is ideal for both large production facilities and smaller workshops. Thanks to its innovative design and modern technologies, this tapping machine provides exceptional reliability, high operating speed, and minimizes the risk of errors and inaccuracies during the threading process. Main advantages of the CORMAK RGE36PWx1200 Electric Tapping Machine High-precision tapping: Thanks to the use of a servo drive and a tapping arm, the machine ensures excellent accuracy and repeatability when cutting threads in various materials. High efficiency: The tapping arm enables fast and effective thread cutting, significantly reducing operation time compared with traditional manual tapping methods. Modern control panel: The touchscreen control panel allows easy adjustment of parameters such as spindle speed, tapping depth, and thread direction. The interface is available in two languages: Polish and English. Tool cooling system: The standard micro-spray lubrication system effectively cools the tap, reduces lubricant consumption, and extends tool life. Improved working efficiency: The chip blow-off system effectively removes chips, improving visibility of the workpiece and increasing operator comfort. Universal application: With a wide tapping range from M6 to M36, the machine is an ideal solution for various industrial applications. Hodpfx Abovugq Ts Isnt Design and technology of the CORMAK RGE36PWx1200 tapping machine The CORMAK RGE36PWx1200 was designed for intensive operation in demanding industrial conditions. Its construction provides high resistance to wear and ensures long service life. The servo-driven tapping mechanism operates smoothly and reliably, while the tapping arm allows precise tool positioning. The rotating motor assembly enables thread cutting at different angles, increasing the versatility of the machine. Key construction features of the CORMAK RGE36PWx1200 include: Tapping arm with quick-change tool holder, allowing fast and secure installation of taps. Adjustable overload clutches, providing protection against excessive loads and preventing tool damage. Robust machine construction with a micro-spray lubrication system ensuring effective tool cooling. Standard equipment of the CORMAK RGE36PWx1200 tapping machine Touchscreen control panel: Enables easy programming of tapping parameters such as speed, direction of rotation, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical specifications of the CORMAK RGE36PWx1200 tapping machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1200 mm Maximum spindle speed 125 rpm

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 Hnjdpfx Aszmapijb Iot clamping length max. 850 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Hodpoyl U Tujfx Ab Isnt Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm Hnedpfew E Nmkox Ab Ijt diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Hydraulic rolling process Felsomat loader cell Complete housing

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, Hsdpfx Abjwgizdj Ijnt multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Hnedpfx Aekytxzsb Ist Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: new, Year of construction: 2026, CORMAK RGE16PW Electric Tapping Machine The CORMAK RGE16PW electric tapping machine is an advanced device designed for thread cutting in a wide range of materials, suitable for both industrial applications and professional workshops. Thanks to its innovative technology and construction, the CORMAK RGE16PW significantly reduces tapping time while providing higher efficiency and precision, making it an essential tool in any production environment. This machine combines speed, accuracy, and reliability, allowing easy thread cutting at various angles with full control over process parameters. Hnedpfxovvlkzs Ab Ijt Main advantages of the CORMAK RGE16PW Electric Tapping Machine Precision tapping: Thanks to the servo drive and precisely programmed control system, the tapping machine ensures excellent thread quality while maintaining the ideal 90° working angle. Versatility: The ability to process various materials such as steel, stainless steel, aluminium, and non-ferrous metals allows wide application across different industrial sectors. Intuitive operation: The touchscreen control panel, available in Polish and English, enables easy programming of operating parameters such as spindle speed, tapping direction, and thread depth. Advanced cooling system: The integrated micro-spray coolant system provides optimal tool cooling, reducing lubricant consumption and extending tool life. Wide range of applications: The rotating tapping arm enables thread cutting at various angles, making the machine suitable for both serial production and individual manufacturing tasks. Design and Technology The CORMAK RGE16PW was designed for intensive operation in demanding industrial environments. Its construction is based on robust and precise components that ensure long-lasting and reliable performance. The central element of the machine is the tapping arm equipped with a quick-change tool holder, allowing fast and convenient replacement of taps. This enables users to switch between different taps more efficiently, improving overall productivity. The tapping arm is connected to a high-torque servo drive, which ensures precise thread cutting. The rotating arm provides exceptional flexibility, allowing tapping at any angle and making the machine a versatile solution for various industries. Standard Equipment of the CORMAK RGE16PW Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE16PW Tapping Machine Parameter Value Power 0.6 kW Power supply 230 V Weight 30 kg Maximum arm reach 1080 mm Maximum spindle speed 375 rpm Included in the set: Tap holders for: M3, M4, M5–6, M8, M10, M12, M14, M16. The machine is supplied without a workbench, vice, and taps

Condition: used, thread dia. 3 - 10 mm Tools speed 120 - 600 U/min table-size 250 x 350 mm throat 250 mm voltage 380 V threading length 80 mm Hnodpfx Aelwlk Ajb Iot total power requirement 0,55 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,7 x 0,7 x 1,9 m

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8822, Offer Number: M14L/8822 Machinetype: thread rolling machine - flat die Make: MENN Type: GW52 Hnedswi Ti Repfx Ab Ijt Constr. year: 1974/26 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm Hnedetzdyzepfx Ab Iot thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Year of construction: 1990, condition: used, spindle taper 2 x SK 40 forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm workpiece dia. with double equipment max. 135 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm stroke of tool slide 120 mm Hedpfxoyt Rwrs Ab Ijnt Feed speed max. 2 m/min. column movement 200 mm tailstock quill stroke 100 mm morse taper 3 MK centre height 260 mm axial distance of the quills 135 mm passage of steadyrest 40 - 80 mm control SIEMENS SINUMERIK 810 weight of the machine ca. 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolant

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Hnjdpfx Abov Tqdbo Ist Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D Hnedsx Ed A Ropfx Ab Iot - Cooling tank - Chip conveyor

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . Hnodpfx Aovk D Rpsb Ist 230V .

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250×1250 No. 71740386401 Long thread and spline milling machine, also for gear cutting. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm above the bed/support) Milling length (Z-axis): 1250 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Hnjdpfx Abezxn Ano Ijt Machine weight: Approx. 3,800 kg