Used Tool Cutter Grinder for sale (39,071)

Condition: used, Year of construction: 2001, Strausak Fleximat 91L Technical Data Axes: X / Y / Z / B / C Travel distances X / Y / Z: 360 / 240 / 360 mm Rapid traverse rate X / Y / Z: 10,000 mm/min Grinding spindle speed: 1000–9000 min-1 Grinding wheel diameter max.: 160 mm Grinding spindle drive: 4 kW at 4000 min-1 Grinding spindle mount: STRAUSAK taper 1:5 Grinding spindle torque max.: 7 Nm Workpiece spindle mount: ISO 50 Center height: 125 mm B-axis: Swiveling range: 470° B-axis: Rapid traverse rate max.: 4000°/min C-axis: Rotation range: Continuous C-axis: Angular speed max.: 14,400°/min Smallest input unit X / Y / Z: 0.001 mm Smallest input unit B / C: 0.001° Connection, weight, and dimensions Connected power: 12 kW Electrical connection: 3 × 400 V / 50 Hz Bwodpfxez Tc T Ns Afgew Equipment and scope of supply Loading device Related accessories as shown in the photos Loading device and related accessories as shown in the photos. Technical data is subject to change without notice. Errors and prior sale are reserved. The properties and scope of supply agreed upon in the purchase contract shall apply.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system Bwodowxxdfepfx Afgjw >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Bedpfx Afsu Ezb Eogoww

Condition: used, Year of construction: 1974, Clamping length: max. 635 Distance between centers: 125 Table travel: 400 Maximum grinding travel: approx. 300 Table speed, infinitely adjustable: 30-1000 mm/min Bwodozcyynepfx Afgow Grinding spindle speed, 3 stages: 1750, 2150, 2850 1/min Weight: approx. 1800 kg

Condition: good (used), Acera F3 Top quality milling machine. Motor and gearbox sound perfect. There are no accessories other than what you see in the pictures. Can be loaded into a Eurotrailer and transport organized throughout Europe. Bsdpfer Ixpdex Afgjww

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Bwedpfsv Azb Njx Afgsw

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Bwodexbx R Uopfx Afgew

Condition: good (used), Year of construction: 2009, functionality: fully functional, Anca control system. Bwjdoz Ry Tuopfx Afgew

Condition: used, functionality: fully functional, Walter HMC 500 WWM 5-axis tool grinding machine A-axis: 750 mm X-axis: 290 mm Y-axis: 320 mm Z-axis: 660 mm Tool diameter: 200 mm The machine is equipped with linear scales on 3 axes. Bodpfx Aoz E N Upefgsww

Condition: good (used), Year of construction: 2013, functionality: fully functional, 5-axis CNC grinding machine - Solution Line control system - Direct drive on all linear axes - Direct drive in all rotary axes Bwjdpjzcch Iofx Afgsw - Direct path measuring systems in the X, Y, and Z axes - Automatic 5-position grinding wheel changer with its own NC drive for grinding wheels and coolant distributor, with collision monitoring - Central lubrication Further details available upon request.

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, Machine with Erosion function. Upon request, machine can be restored at additional price. Bwedpezvwfmefx Afgjw

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: PE-305L-1307, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller model: SIEMENS 840D, TECHNICAL DETAILS X-axis travel (longitudinal): 400 mm Y-axis travel (cross): 250 mm Z-axis travel (vertical): 250 mm Resolution X, Y, and Z axes: < 0.1 µm Feed rate X, Y, and Z axes: max. 24 (48) m/min Rotary axis for workpiece (A-axis) Indexing mode resolution: < 0.0001° Speed range as rotary axis: max. 200 rpm Bwedpfsyvq Siox Afgew Speed range universal rotary axis: max. 2,500 rpm Torque: max. 88 Nm Swivel axis for grinding head (C-axis) Swivel range: 225° Resolution: < 0.0001° Swivel speed: max. 360°/s Grinding spindle (motor spindle) Max. speed: 12,000 rpm Drive power: 15 kW Taper: HSK 50 E MACHINE DETAILS Control: SIEMENS 840D Drive technology: SIMODRIVE 611D Connected load: 30 A Number of axes: 5-axis EQUIPMENT GEA Multitron Junior air extraction system, year of manufacture 2008 Volmat FA-120S filtration system with cooling, year of manufacture 2008 Motoman MX100 industrial robot with control cabinet, 400V (not functional) Note: The machine has already been completely dismantled.

Condition: excellent (used), functionality: fully functional, Reinecker WZS60 Year of manufacture: 2007 Bwedpfx Afozwplbsgsw Glass changing machine Part loader

Condition: used, Technical specifications: Max. grinding wheel diameter: 150 mm Bwedpfx Ajzhufzjfgjw Dividing head for sharpening milling cutters, 24' Adjustable sharpening angle Manual feed Motor power: 0.3 kW Overall dimensions: Length: 700 mm Width: 800 mm Height: 1500 mm

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Bedpfjwdic Asx Afgoww Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: used, Technical specifications: Max. grinding wheel diameter: 150 mm Indexing head for sharpening milling cutters Adjustable sharpening angle Manual feed Bjdpfezhud Rox Afgsww Motor power: 0.3 kW Overall dimensions: Length: 570 mm Width: 320 mm Height: 600 mm

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device Bwjdsqd N S Dopfx Afgsw >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: used, Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 Bwodpfxolmrkzo Afgew -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

Condition: good (used), Year of construction: 2007, Rollomatic GrindSmart 620XS Technical Data Model designation: CNC 620 XS Control system: FANUC, operator panel FANUC PANEL i Loading system: Gripper with workpiece pallets Oil mist separator: Elbaron, included in the scope of supply Accessories: Workpiece pallets and grinding wheel holders as shown in the photos Connection, weight and dimensions Electrical connection: 3 × 400 V / 50 Hz Equipment and scope of supply Elbaron oil mist separator (part of the machine) Loading system with gripper and workpiece pallets Additional workpiece pallets as shown in the photos Grinding wheel holders with grinding wheels as shown in the photos Bodpfx Afs Aba Tnegoww Related accessories as shown in the photos Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of supply agreed upon in the purchase contract shall apply.

Condition: good (used), Year of construction: 2010, functionality: fully functional, 5-axis CNC tool grinding machine, Anca RX7 Bwodpfxjz E Hzaj Afgjw - Year of manufacture: 2010 - Software: ToolRoom RN32 - Spindle speed: 10,000 rpm - Double disc changer, capacity up to 8 discs - PLX tool loader

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 12-09, Used tool grinding machine Manufacturer: SCHÜTTE Type: WU 405 Year of manufacture: 1998 Machine No.: 12/09 Bedo Aay Dqspfx Afgoww

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6114676, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 180 kg Dimensions: 850/620/1600 mm Installed power: 0.7 kVA Customs tariff code: 8460.3930 TECHNICAL CHARACTERISTICS DOUBLE CUP PRE-GRINDING AND SUPER-FINISHING WHEEL (FOR HARD METAL) - Abrasive: diamond - Diameter: 175 mm - Bore: 20 mm Bjdjw T S Tbopfx Afgeww Spindle speed: 2500 rpm Cutting speed: 23 m/sec Spindle bearing: precision plain bearing Micrometric infeed of the workpiece by means of a fine-pitch threaded spindle, division: 0.01 mm Adjustment of approach and clearance angle: max 26° TOOL HOLDER CLAMPING CAPACITY: - Prism-shaped tool bodies: max 40x40 mm - Cylindrical tool bodies: max 16 mm - Circular cutting tools: max 85 mm MOTOR POWER: - Drive motor: 0.55 kVA - Pump motor: 0.1 kVA Coolant tank capacity: 10 l. All technical specifications are provided without obligation and subject to error or omission.

Condition: refurbished (used), total height: 1,050 mm, total length: 850 mm, total width: 620 mm, spindle speed (max.): 2,500 rpm, type of input current: three-phase, grinding wheel diameter: 175 mm, overall weight: 350 kg, rotational speed (max.): 2,500 rpm, grinding spindle motor power: 750 W, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2026, warranty duration: 24 months, For sale: fully overhauled, high-precision Agathon 175-A tool sharpener Accessories included with the machine: - 2 new Diametal MD16 and D91 grinding wheels - Centralized automatic spindle lubrication - 1 articulated arm LED lamp, CCEA - 1 fixed table - 1 PET rear guard - 1 PET front guard - 1 new electrical unit, CE compliance certificate - 1 frequency converter for adjusting the spindle speed Machine price: CHF 19,900,- (excluding VAT) Bjdpfxjz R Daro Afgeww

Condition: good (used), functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Cylindrical grinding device -- Dividing device -- Coolant device -- Grinding wheel holder -- Grinding wheels --- Bedpfx Afozutnzsgjww Operating instructions .

Condition: excellent (used), Year of construction: 2015, operating hours: 12,068 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 5,200 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 14,500 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 2.1 R8 Colour touch screen: 15 ["] Number of axes: 5 Stroke X axis: 460 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis: 0.0001 [mm] Bwsds Ahpfbspfx Afgjw Stroke Z axis: 660 [mm] Resolution Z axis: 0.0001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 14.5 [kW] Max. diameter grinding wheel: 200 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 12068 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 5200 [Kg] ADDITIONAL EQUIPMENT: CO2 fire extinguishing system (to be inspected by the buyer through a qualified body) A-axis for cylindrical grinding (Hollowshaft option) 8-position grinding wheel changer Electrostatic mist separator with noise silencer, DSL type AES-GAMMA 30 Hydraulic and electrical connections for automatic steady rest operation Automatic steady rest Manual tailstock Combined filtration system with paper band filter + cartridge filters, connected to a cutting fluid cooling unit 3-color signal tower light "Eco Loader" tool loader with its tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12 and Ø16) E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20) Grinding wheel holders x2 electrode holders L = 25 mm x1 electrode holder L = 45 mm x5 grinding wheel holders L = 45 mm SOFTWARE: TOOLSTUDIO Standard & Advanced TOOLSTUDIO Step Tools License TOOL STUDIO PC License WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for erosion) WALTER WINDOW MODE Package 63 for PCD drills More information upon request.