Used Tool Cutter Grinding Machine for sale (66,906)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, Lodjywcl Rjpfx Advori is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: reconditioned (used), functionality: fully functional, The machine is retrofitted and modernized in 2025. The modernisation consists of adding the automatic infeed and auto cycle functions. The HMI and operating panel is offered in English, German and French. Dimensions Grinding Wheel (OD x ID x width) Ø 350 x Ø 127 x 100 mm Grinding wheel width 100 mm Ø min / max to rectify 1.5 / 50 mm No. infinite grinding wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/250 rpm Infeed : Auto Auto cycle : Yes Dressing : Manual Dimensions Regulating Wheel (OD x ID x width) Ø 230 x Ø 76.2 x 100 mm Regulating wheel width 100 mm Maximum length to be rectified in plongeé 200 mm Length 1800 mm Width 1300 mm Ledpfxsvtl Rpe Advori High 1600 mm Weight 2000 Kg Accessories: New Coolant tank with paper filtration system

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm Lrsdpsh St Dqsfx Advsi ACCESSORIES: DRESSING TOOL

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Ledpfxeyv N Ago Advsri Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher Lrsdpfx Aeyv Nb Nodvji - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm Lredpfxjyv Iqvj Advji 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Year of construction: 2019, Technical details: max. wheel diameter: 1000 mm gear width: 250 - 800 mm max. module: 15 cycle time: 1017 h min. module: 20 max. table load: 4000 kg Lrjdjywx Ihopfx Advei clamping diameter: 600 mm total power requirement: 80 KVA weight of the machine ca.: 20 t dimensions of the machine ca.: 5,0 x 6,5 x 3,7 m

Condition: good (used), ELB-SCHLIFF SW10 VA II Surface Grinding Machine Table Dimentions: 1000/300 mm Machine Dimentions (LxWxH): 2800x1600x2300 mm Ljdoiam Nwepfx Adveri Weight: 3500 kg Cooling System (LxWxH): 1400x1000x800 mm Electrical panel (LxWxH): 1500x1000x450 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 100 mm, workpiece weight (max.): 35 kg, grinding length: 500 mm, grinding diameter: 125 mm, overall weight: 1,800 kg, input voltage: 400 V, For sale: 1 used grinding machine. Manufacturer: Knuth Werkzeugmaschinen GmbH. Model: RSM 500. Year of manufacture: 2006. Technical data: Centre height: 100 mm; Max. grinding diameter: 125 mm; Distance between centres: 520 mm; Max. grinding length: 500 mm; Max. workpiece weight: 35 kg; Internal grinding diameter: 10 - 40 mm; Internal grinding depth: 50 mm; Spindle taper: MK4; Tailstock: MK2; Weight: 1,800 kg. Documentation available. The machine can be inspected at our warehouse in 09599 Freiberg. Lrjdpfsxzrvwsx Advji

Condition: used, • Throughput capacity: up to approx. 50 liters/minute • Tank volume: 0.3 m2 • Tank material: polyethylene (UV-stabilized) • Sedimentation granulate Sediflock: powder form (according to manufacturer specifications) • Sludge bag approx.: 70 kg • Compressed air: 6 bar • Power connection (depending on pumps): 2 kW, 400 V/50Hz – 3NPE • Dosing of sedimentation granulate: automatic • Serial number – B085.23 • Further information can be found below Lrsdpfx Aoywizxsdvsi • Price on request

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm boring diameter 100-500 mm control Sinumerik 840D Ljdpfx Aswzmqrodvjri

Condition: used, Arbor Ø 30 mm Mandrel length 135 mm width 600 mm Lodpfjlf H Tyox Advjri length 1.000 mm height 1.400 mm WIDMA tool sharpening machine for grinding and sharpening tools or for machining complex geometric shapes.

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, machine/vehicle number: 70013, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, controller manufacturer: HEIDENHAIN, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle speed range: 32 to 1600 rpm Table dimensions: 590 x 430 mm Jaw width: 160 mm MACHINE DETAILS Control system manufacturer: HEIDENHAIN Lrjdpfxjyk Ufns Advoi Dimensions & Weight Dimensions (L x W x H): 2500 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Three-axis digital readout Workshop drawer cabinet with matching accessories External reference: 14

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 113981, center height: 180 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, overall weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 08.04.2026 to 16.04.2026! TECHNICAL DETAILS Centre height: approx. 180 mm Lrjdpsyladfefx Advoi Centre distance: approx. 2,000 mm Grinding wheel diameter: approx. 400 mm Grinding wheel width: 100 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 30 A Power connection: 7.5 kW Dimensions & weight Dimensions (L x W x H): 7,000 x 2,000 x 1,800 mm Weight: 5,000 kg External reference: 20

Condition: ready for operation (used), functionality: fully functional, center height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 3,000 kg, controller model: MARPOSS E54, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to punctual collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Centre height over bed: approx. 150 mm Centre distance: approx. 700 mm Grinding wheel diameter: approx. 300 mm MACHINE DETAILS Control: MARPOSS E54 Operating voltage: 3 x 380 V Frequency: 50 Hz Rated current: 17.8 A Ljdpfxeylaf Nj Advsri Connection load: 9.84 kVA Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,000 mm Weight: 3,000 kg External reference: 19

Condition: ready for operation (used), Year of construction: 1987, operating hours: 71,585 h, functionality: fully functional, machine/vehicle number: 17655, grinding wheel width: 139 mm, grinding wheel diameter: 400 mm, total height: 2,400 mm, total width: 3,000 mm, total length: 4,000 mm, overall weight: 7,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/26 and 16/04/26. TECHNICAL DETAILS Grinding wheel diameter: approx. 400 mm Grinding wheel width: approx. 138.5 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connection: 75 kVA Dimensions & Weight Dimensions (L x W x H): 4000 x 3000 x 2400 mm Machine weight: 7 t Operating hours: 71,585 h Lrodpfxjyk Dk He Advji External reference: 3

Condition: reconditioned (used), Year of construction: 1975, functionality: fully functional, 3-axis digital readout FAGOR Year of manufacture: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Lodpfx Adoyw H Euovori Universal table 660 x 380 mm clamping surface Vertical milling head Extendable quill Milling cutter guard enclosure Machine lamp Various tool holders SK 40 Chip tray Coolant system 4 pcs. machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION !!!

Condition: used, Year of construction: 1976, magnetic clamping plate 1.000 x 600 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ledpsywnwlsfx Advjri Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Bidding is binding and requires timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg Lrsdpsyk Thuofx Advji EQUIPMENT Table with 4 T-slots Mounted vise Documentation External reference: 12

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 total power requirement 0,4 kW Ljdpfew N S D Sjx Advsri weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain Lsdpfx Adowbi A Devori - Includes 1 machine vice - Includes clamping claws

Condition: used, Year of construction: 1950, width of the strips 150 mm band length 6680 mm Lrjdpfxjua Ivcj Advei volt 380 V weight 800 kg dimensions of the machine ca. 3,2x1,6x1,75 m Wood surface sanding machine Carriage length: table size 2500 x 800 mm Belt length: 150 x 6680 mm Manual processing table, adjustable Table height adjustable

Year of construction: 2001, condition: good (used), table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- Lrjdett Tb Dspfx Advji axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm Ledpfx Aow Dvkasdvjri --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") Lrjdsw Intaopfx Advji --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988