Used Torque Multiplier for sale (2,417)

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Pgodpsyw Tncofx Ag Tei Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N Pgodpfxoyxm Tnj Ag Tsi MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 315357, turning diameter over cross slide: 420 mm, turning length: 1,000 mm, turning diameter: 600 mm, spindle speed (max.): 3,200 rpm, controller model: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over cross-slide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main Spindle Speed range: 16 – 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool Turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Pgodsyxmurspfx Ag Toi Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS CNC control: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Floor space required: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck (Model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 8,000 rpm, turning diameter: 18 mm, controller manufacturer: Siemens, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter: 18 mm (16 mm) Spindle speed: 800 - 8,000 rpm Spindle circle diameter: 180 mm Main spindle drive power: 11 kW Torque: 18 Nm Bar feeder capacity: max. 80 mm Longitudinal slide travel: 50 mm (63 mm) Pgedpfx Agoyxmrqs Tji Cross slide travel: 20 mm (32 mm) MACHINE DETAILS Control: Siemens Dimensions & Weight Space requirement approx.: 6.0 x 1.5 x 2.2 m Machine weight approx.: 5.5 t EQUIPMENT CO2 fire extinguishing system by Kraft&Bauer Ruez scraper belt conveyor IEMCA bar feeder PRA 52 42 F Tool package Cam package Various clamping devices Documentation Chip conveyor Coolant unit Parts discharge chute Signal lamp Interface for bar feeder Hydraulic unit

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 7,000 rpm, spindle bore: 42 mm, controller model: Siemens 840 D - SL, counter spindle speed (max.): 7,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Counter spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3 x 12 pos Number of live tool stations: 3 x 12 pos Rotational speed of driven tools: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Psdpfx Aoyxmnxog Tjgi Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Space requirement: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Knoll chip conveyor High-pressure coolant (14 bar) Parts catcher Counter spindle Interface for bar feeder Spinner Barload BL 0146 bar loading magazine C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool measuring arm

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 426 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 1,250 mm Travel Range Y-axis: 880 mm Travel Range Z-axis: 800 mm Main Spindle Max. Speed Range: 12,000 rpm Drive Power: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Work Table Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slot Width: 18 H7 mm T-slot Pitch: 100 mm Tool Changer Number of Tool Stations: 30 Max. Tool Diameter: 80 mm Max. Tool Diameter with Empty Adjacent Pocket: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Weight: 100 kg Feeds Rapid Traverse (X / Y / Z axis): 15 m/min Feed Rate: 10,000 mm/min MACHINE DETAILS Pgedpfjyxmmnex Ag Tji Control Model: TNC 430 Heidenhain Total Power Requirement: 29 kW Dimensions & Weight Space Requirement: approx. 7.0 x 5.0 x 3.3 m Machine Weight: approx. 16.0 t EQUIPMENT Documentation Chip Conveyor Coolant System High-Pressure Coolant Measuring Probe (Manufacturer: Heidenhain) Internal Coolant Supply Note: The transport rigging must be arranged by the buyer!

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 430 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm Main spindle Max. speed range: 12,000 rpm Drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 Work table Clamping area: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer Number of tool stations: 60 Pgsdpjyxmd Tjfx Ag Tei Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total weight: 100 kg Feeds Rapid traverse (X / Y / Z-axis): 15 m/min Feed rate: 10,000 mm/min MACHINE DETAILS Control model: TNC 430 Heidenhain Total power requirement: 29 kW Dimensions & Weight Space requirements: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t EQUIPMENT Documentation Chip conveyor Coolant system Tool changer Note: Transport tackle must be organized by the buyer!

Condition: ready for operation (used), Year of construction: 2000, operating hours: 27,218 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle motor power: 15,000 W, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, number of axes: 3, This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 600 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details. • Spindle hours: 11,320 h • Drive power (44% ED): 15 kW • Drive power (100% ED): 6 kW • Max. torque: 50 Nm Pgjdpfjyxrndex Ag Tei • Spindle torque (max at 44% ED): 800 Nm • Gear stages: 4 • Rapid traverse (X/Y): 15,000 mm/min • Rapid traverse (Z): 12,000 mm/min • Table dimensions: 520 x 900 mm • Table load capacity: 400 kg • Tool changer (TCD 44): 22 positions • Max tool length: 350 mm • Coolant tank capacity: 150 l • Total installed power: 15.8 kW • Voltage: 3 x 400 V / 50 Hz Additional equipment • Benz high-speed spindle (up to 25,000 rpm) • Vice • Chucks • Cutters • Plates • Tap holders Technical Specification Taper Size SK 40 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,553 h, number of axes: 3, total height: 3,000 mm, total width: 5,000 mm, spindle motor power: 9,000 W, product length (max.): 8,400 mm, spindle speed (max.): 24,000 rpm, This 3-axis Weeke Optimat BHC 550 was manufactured in 2003. It features a spacious table size of 4250 x 1300 mm and a powerful 9 kW main spindle with infinitely variable speeds from 1250 to 24000 rpm. The machine includes an 18-position tool changer and a drilling/milling unit with multiple configurations. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke Optimat BHC 550 machine we have for sale. Contact us for further details. • Table size: 4250 x 1300 mm • 8 consoles incl. lifting rail • Dual-circuit vacuum block suction • Vacuum connection for stencil operation • Y-stop rail for top layer overhang • Main spindle: HSK F63, liquid recirculation cooling • Max. tool diameter: 180 mm • Aggregate interface for main spindle, C-axis with torque transmission and 3-point support • Tool changers: 18-position (moving in X), 8-position (moving in Y) • Drilling/sawing/milling unit with ER25 • Drilling/milling unit, manually tiltable 90°, with ER25 • Drilling unit: horizontal in X: 4; horizontal in Y: 2; vertical: 19 • Groove saw in X direction, tool diameter 100 mm • Handheld terminal for machine control with potentiometer • Control/software: Windows XP, WoodWOP 5.0, network connection possible • 2004 new hard drive Pgedpfjyxrdrex Ag Tji Additional equipment • Vacuum pump (included)

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), first registration: 10/2024, fuel type: diesel, overall weight: 2,290 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,825 mm, total width: 2,137 mm, total height: 1,861 mm, loading space length: 2,154 mm, loading space width: 1,496 mm, loading space height: 1,263 mm, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 72541---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Heated windscreen including electrically adjustable and heated exterior mirror * Seat package 20: "Capitol/City" fabric in Ebony (black) - Double passenger seat (with storage compartment under smaller seat section), variably foldable and collapsible - Driver's seat manually adjustable in 3 ways - Height-adjustable headrests - Manual lumbar support (driver's seat) - Airbag package (front airbag for passenger, head-shoulder airbags at the front, side airbags for driver and passenger) - Seat heating for driver's seat * Partition to the cargo area with through-loading opening without window OTHER EQUIPMENT * ABS with EBD * Driver's side airbag * Exterior mirror, narrow mirror format * Battery, reinforced * Hill start assist * Rubberized floor covering, front * On-board computer including outside temperature display * Roof storage gallery at the front, across the entire width of the interior, including side grab handles * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Double-wing rear door without window * Tachometer * Third brake light * ESP with traction control including torque vectoring control and adaptive load control * Electric front window lifter - with quick-down switch for driver's side * Ford Easy Fuel - comfort tank cap and misfuelling protection * FordPass Connect * Glove compartment with lid * Interior lighting at the front with delay switch * Air conditioning at the front including semi-electronic recirculation switch * Protective floor made of molded plastic * Side cargo area paneling, half-height * Steering column, adjustable in height and reach * Alternator/generator * Center console, front - open with storage area, 2 cup holders * Fog lights * Emergency brake light - hazard warning lights activated when braking hard * Radio: Ford Audio System 2 - Radio DAB/DAB+ - Radio (FM/MW) - USB port - Bluetooth interface - Audio remote control on the steering wheel * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 16 with 205/60 R 16 tires and wheel trims * Sliding door at the rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS Pedsvnxvuepfx Ag Tegi * Safety brake assistant EBA * Seat belts - seat belt tensioner and belt force limiter at the front - warning system for unfastened seat belt for driver and front passenger * Safety door lock, automatic (45 sec.) * Sun visor for driver and front passenger * Spoiler lip at the front * Start-stop system * Dust and pollen filter * Socket: 12-volt connection on the front center console * Front bumper and rear bumper end caps painted in the same color as the vehicle * Daytime running lights * Partition to the cargo area without window * Child safety lock on sliding door * Door handles, black * Lashing eyes * Immobilizer, electronic * Heat-insulating glazing, slightly tinted * Central locking with remote control - door lock only on driver's door - 2 keys, 1 of which is a remote control key ... and much more----1st hand. German version. Errors and prior sale reserved. 2-year factory warranty from the date of registration (can be extended on request). We are happy to accept your vehicle as part payment. Financing/leasing also possible without a deposit! Do you have any questions? We are happy to advise you! As a deviation of the vehicle from the above description cannot be ruled out despite existing checks, we would like to point out that the vehicle description is only

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), first registration: 10/2024, fuel type: diesel, overall weight: 2,270 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,825 mm, total width: 2,137 mm, total height: 1,852 mm, loading space length: 2,154 mm, loading space width: 1,496 mm, loading space height: 1,263 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 76984 LOCATION: 04425 Taucha, Gerichtsweg 4 Telephone for inquiries: Mr. Ralph Bergel: By email: Errors and interim sale reserved! SPECIAL EQUIPMENT * 2nd remote control key for central locking instead of conventional key * Towing device preparation – Preparation kit for retrofitting a trailer hitch incl. ESP trailer stabilization * Passenger front airbag incl. deactivation function and glove compartment with cover * Heated rear window * LED load compartment lighting * Rear Park Pilot system * Seat Package 18: Fabric "Capitol/City" in Ebony (black) – Dual passenger seat (with storage compartment under the smaller section), variably foldable and collapsible – 3-way manually adjustable driver’s seat – Height-adjustable headrests – Manual lumbar support (driver’s seat) * Socket: 12-volt connection in the load/luggage compartment * Partition wall to load compartment with pass-through opening and window ADDITIONAL EQUIPMENT * ABS with EBD * Driver's airbag * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, slim format * Reinforced battery * Hill-start assist * Rubber flooring at the front * On-board computer incl. outside temperature display * Front overhead shelf, spanning the full width of the cabin, incl. side hand grips * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Twin rear doors without windows * Tachometer * Third brake light * ESP with traction control incl. Torque Vectoring Control and adaptive load control * Front power windows – with quick-down function for driver‘s side * Ford Easy Fuel – Convenience tank cap and misfuel protection * FordPass Connect * Glove compartment with cover * Front interior lighting with delay function * Front air conditioning incl. semi-automatic recirculation * Molded plastic load floor protection * Side cargo area cladding, half-height * Steering column, adjustable in height and reach * Alternator/generator * Front center console – open with storage area, 2 cup holders Pgodpfjywc R Hox Ag Tei * Fog lights * Emergency brake light – hazard warning activation during hard braking * Radio: Ford Audio System 2 – DAB/DAB+ radio – analog radio (FM/AM) – USB port – Bluetooth interface – audio remote control on steering wheel * Wheels: Tire repair kit * Wheels: Steel rims 6.5 J x 16 with 205/60 R16 tires and wheel covers * Sliding door, rear right * Protective side moldings, plastic * Electro-mechanical power steering (EPAS) * Emergency Brake Assist (EBA) * Seat belts – front pre-tensioners and load-limiters – unfastened seatbelt warning for driver and passenger * Automatic door lock (45 sec.) * Sun visor for driver and passenger * Front spoiler lip * Start-stop system * Dust and pollen filter * Socket: 12-volt supply at the front center console * Front bumper and rear bumper end caps painted in body color * Daytime running lights * Partition wall to load compartment without window * Child lock on sliding doors * Door handles, black * Tie-down loops * Electronic immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control – Door lock only on driver’s door – 2 keys, including 1 remote control key ...and much more. 1st owner. German specification. Errors and interim sale reserved. 2 years factory warranty from first registration (extendable upon request). We are happy to take your vehicle in part exchange.

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), first registration: 04/2024, fuel type: diesel, overall weight: 2,270 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 2,137 mm, total height: 1,852 mm, loading space length: 2,154 mm, loading space width: 1,496 mm, loading space height: 1,263 mm, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 72536---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Heated windscreen including electrically adjustable and heated exterior mirror * Seat package 20: "Capitol/City" fabric in Ebony (black) - Double passenger seat (with storage compartment under smaller seat section), variably foldable and collapsible - Driver's seat manually adjustable in 3 ways - Height-adjustable headrests - Manual lumbar support (driver's seat) - Airbag package (front airbag for passenger, head-shoulder airbags at the front, side airbags for driver and passenger) - Seat heating for driver's seat * Partition to the cargo area with through-loading opening without window OTHER EQUIPMENT * ABS with EBD * Driver's side airbag * Exterior mirror, narrow mirror format * Battery, reinforced * Hill start assist * Rubberized floor covering, front * On-board computer including outside temperature display * Roof storage gallery at the front, across the entire width of the interior, including side grab handles * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Double-wing rear door without window * Tachometer * Third brake light * ESP with traction control including torque vectoring control and adaptive load control * Electric front window lifter - with quick-down switch for driver's side * Ford Easy Fuel - comfort tank cap and misfuelling protection * FordPass Connect * Glove compartment with lid * Interior lighting at the front with delay switch * Air conditioning at the front including semi-electronic recirculation switch * Protective floor made of molded plastic * Side cargo area paneling, half-height * Steering column, adjustable in height and reach * Alternator/generator * Center console, front - open with storage area, 2 cup holders Pgodjrwh Ngjpfx Ag Tji * Fog lights * Emergency brake light - hazard warning lights activated when braking hard * Radio: Ford Audio System 2 - Radio DAB/DAB+ - Radio (FM/MW) - USB port - Bluetooth interface - Audio remote control on the steering wheel * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 16 with 205/60 R 16 tires and wheel trims * Sliding door at the rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS * Safety brake assistant EBA * Seat belts - seat belt tensioner and belt force limiter at the front - warning system for unfastened seat belt for driver and front passenger * Safety door lock, automatic (45 sec.) * Sun visor for driver and front passenger * Spoiler lip at the front * Start-stop system * Dust and pollen filter * Socket: 12-volt connection on the front center console * Front bumper and rear bumper end caps painted in the same color as the vehicle * Daytime running lights * Partition to the cargo area without window * Child safety lock on sliding door * Door handles, black * Lashing eyes * Immobilizer, electronic * Heat-insulating glazing, slightly tinted * Central locking with remote control - door lock only on driver's door - 2 keys, 1 of which is a remote control key ... and much more----1st hand. German version. Errors and prior sale reserved. 2-year factory warranty from the date of registration (can be extended on request). We are happy to accept your vehicle as part payment. Financing/leasing also possible without a deposit! Do you have any questions? We are happy to advise you! As a deviation of the vehicle from the above description cannot be ruled out despite existing checks, we would like to point out that the vehicle description is only

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals Pgjdjyugvaepfx Ag Toi The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: used, Year of construction: 2002, Technical Details: Psdoymdd Sepfx Ag Tegi SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (infinitely variable): 800 – 10,000 rpm Main cycle times (infinitely variable): min./max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (including bar guide): approx. L x W approx. 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: - Bar feeder Pra 52 P IEMCA - RUEZ KF0WW2/312 DAS, year 2002

Condition: good (used), Year of construction: 2009, operating hours: 21,955 h, functionality: fully functional, HEIDENHAIN iTNC530 controller Table dimensions 5300 x 750 mm Maximum table load 4500 kgs X-axis travel 4500 mm (pendulum operation) Y-axis travel 800 mm Z-axis travel 620 mm Spindle nose to table surface 325 - 925 mm Spindle speed 12000 rpm (Kessler Celox motor spindle) Torque 183 Nm Spindle taper HSK63 ATC 56-position magazine Middle wall in working area - pendulum operation possible Rapid traverse X/Y/Z = 30/40/40 m/min Power consumption 25 kVA Weight 21000 kgs Space requirement L x W x H = 10.4 x 4.2 x 3.2 m Equipment, accessories - Large chip conveyor - Large inclined water system 1800 l Internal coolant system and flushing pump - 2x special-design extraction systems – without piping Pgedpfsyugupox Ag Tei - Machine hood with automatic roller blind - Machine doors with automatic drive and Rotoclear window - Water system 3 x 2 m, position to the left of or behind the machine - Hydraulic clamping unit for machine interior - Blum RMP measuring probe - Separation wall – pendulum operation possible - Hedelius service complete - Pipes for machine cooling, flushing, and pneumatics replaced in 07/2024 - Vises and fixtures on machine table are not delivered with the machine. The machine is no longer in production (it has been professionally stored) and was dismantled in fully functional condition.

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 159422, Verderflex Dura 35 peristaltic pump, serial number: 159422, MFG: 2024 For demanding applications, the Verderflex Dura 35 provides: Maximum flow rate: 5,292 L/hr Maximum pressure: 16 bar Maximum medium temperature: 80 ºC Compressible solid size: 8.75 mm Suction lift: 9.5 mWc Certification: ATEX, FDA and EC/1935 Pump Housing made from cast iron (GG25) Front Cover made from carbon steel with plexiglass inspection window Rotor made from cast iron (GG25) Drive Shaft EN24T Steel Mounting Frame made from carbon steel Torque Arm made from carbon steel Bearing made from bearing steel Flow 11/hr Pump speed 35 PM Installed motor power 25W Max turndown at 5 Bar discharge pressure 101 Verderflex peristaltic pumps are the ideal low cost life cycle solution for the transfer and dosing of difficult to pump fluids such as viscous, abrasive or high solid content liquids such as slurry and sludge. Sizes range from small models such as OEM pump modules, precision and industrial style tube pumps to the world's largest hose pumps, used in the most demanding applications. These include water treatment, biotechnology, food & drink production, mineral processing and chemical manufacturing. Features : • Peristaltic pumps are excellent problem solving pumps and offer the following benefits: • Abrasion Resistant • No moving parts in the liquid stream • Accurate Dosing • Self Priming • Can pump liquids containing up to 80% • inorganic solids (fines) • Aseptic pumping • smooth liquid passage • Easy and completely cleanable without disassembly • Suitable for handling shear sensitive products • Can run dry • Low cost of ownership • High suction capability of up to • 95% vacuum or a 9.5 mWc • No seals • Reversible rotation, empties line or blockages • Can pump • abrasive, very viscous or • high density fluids Application for abrasive fluids : Lime mixing, Kieselguhr, circulation and dosing Application for corrosive fluids : Ferric Chloride, Copper Sulphate and similar Activators, process chemicals, Acids, including Alkalis Application for shear sensitive fluids : Coagulants, Flocculants and bacterial remediation treatments Application for mining industry : Dosing Process Reagents, Thickener Underflow, polymers and slurry transfer Application for water treatment : Dosing Lime, Hypochlorite, Silicate, Polymer, Ferric Chloride, sludge transfer and filter press feeds Application for chemical Industry : Corrosive Acids, Bases and Hydrocarbons Application for Printing and packaging : Inks (including water based inks), Paints, Dyes and Glue Application for Battery Filling, Chemical Cleaning, Equipment Sterilising, Seed Coating : Biocides, Hydrogen Peroxide, Sodium Hypochlorite, Caustic Soda Application for Laboratory Systems : Biological Broths to polluted streams Application for Agriculture : Feed Additives, Animal Vaccines and Waste Transfer Application for Paper and Pulp : Pulp and Dyes Food and Beverage : Breweries, Diatomaceous Earth, wineries, dairies, sugar refining, abattoirs The pump is in excellent condition, like new. Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Pgjdpfx Aswdtbcog Tji We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,000 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC620 HSCI, total height: 3,032 mm, table load: 50 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,000 W, number of axes: 3, This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details. • Package: Both machines for 80,000€ • B-axis swivel range: ±100° Psdpsyxpkvefx Ag Tsgi • C-axis swivel range: 0–360° • Spindle torque: 33 Nm • Tool magazine: 50 positions • Table surface: Ø 400 mm • Table T-slots: 5 slots, 14 mm size, 75 mm spacing • Table height: 860 mm above floor • Transport dimensions: approx. 1600 mm x 2295 mm • Spindle hours: 11,000 Additional equipment • Automation: Lang Eco Compact 10 (fully configured/functional) • Chip conveyor: Yes • Included accessories: Extensive ISO30 tool holder package • Special feature: Custom-made workspace hood/cover Technical Specification Taper Size ISO 30

Condition: used, Year of construction: 2016, control INDEX C200-sl spindle passage 102 mm spindle diameter in front bearing 140 mm turning speeds 3.500 U/min spindle nose ISO 702/1 8 chuck diameter 315 mm torque 450 Nm output 47 kw z-axis 610 mm Feed force in Z 7.000 N Rapid traverse in Z 40 m/min z-axis 610 mm x-axis 780 mm Feed force in direction of Z and X Axis 7.000 N Fast travel in Z and X 40 m/min Number of tools 2x3 St. worktool system VDI 30 workpiece support: Oben x-axis 580 mm y-axis ±140 mm b-axis 270 ° Feed force in X/Y/B 7.000/10.000/614 Nm rapid traverse X/Y 40/30 mm/min workpiece support 2: Unten y-axis ±140 mm b-axis 270 ° Feed force in Y/B 10.000/614 Nm Rapid traverse in Y 30 m/min turning speeds 9.000 U/min spindle nose HSK-T 63 torque 66 Nm output 24,5 kw workpiece length 300 mm diameter of tools max. 70 (160) mm weight of tools max. 5 kg number of tool places 140 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. The Y-pillars have grooves, see photo. This does not affect the machine's accuracy. Technical Features: - 5-axis machine equipment for simultaneous machining in 5 axes for both motorized milling spindles - "Smartlight" signal light with LED - Power-operated chuck, Röhm DURO-NC - Foot switch for power clamping on the main and counter spindles - Stop device including coolant supply through the main spindle - Stop device including coolant supply through the counter spindle - Cooling unit for cooling the spindles and the machine control cabinet, 26 kW / 70 l/min - Extraction system with electrostatic separator, Büchel SH2000 PEV/T - Chip conveyor - Drill breakage monitoring for tool holders 1 and 2 using Renishaw laser - Coolant flushing gun Podpfx Aoywzxveg Tsgi - Air curtain on the work area window - "Create Myinterface" software package - Brankamp CMS 100 Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: defective spare-parts repository (used), Year of construction: 2005, functionality: not functional, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 360 mm, controller model: Siemens 840 D PowerLine, TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X- / Y- / Z-axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Pgjdpfxoyxgc Ne Ag Toi Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm X-axis travel: 150 mm Y-axis travel: 600 mm Spindle bearing diameter: 110 mm Turret Number: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of driven tool stations: 3 x 12 Max. speed of driven tools: 6,000 rpm Drive power driven tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-compensation axes (+/-1°) Chip conveyor Parts catcher Tool breakage control Bar feeder: IRCO Profimat 65.6

Condition: used, HEDELIUS RS 60 MAGNUM-2000 is a 5-axis machining center engineered for precision, high accuracy and reliable performance. Working capacities: table 1,200 x 600 mm (Ø 680 mm), table load max 300 kg; travels X 2 mm, Y 620 mm, Z 520 mm, swivel A +15 / -95°. Main specs: spindle nose SK40, speed 50–12 rpm, torque 121 Nm; feed 0–45 mm/min, rapid 45 m/min, max feed force 7 N; supply 3x400 V 50 Hz, total power 25 kVA; machine weight ≈11 kg, dimensions 5,400 x 4,300 x 3 mm; tool change 3 s, tool Ø max 80 mm, length 330 mm, weight 8 kg. Equipment: 56-place tool magazine, 1,250 l coolant, 80 bar high-pressure coolant, Renishaw probe, chip conveyor, oil-mist extractor, switch-cabinet AC, full enclosure. Delivers tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine-building. Pgodpsyxn Nqofx Ag Toi

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Pgjdpfx Ajyxn Nkeg Tei

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Pgodpfoyxn Awox Ag Tji

Condition: used, EMAG VL 4 is a machining cell / vertical lathe engineered for high-precision work, exceptional accuracy and production reliability. Capacities: 2 machines, 2 axes; max workpiece dimension 200 mm; Z travel 400 mm; X travel 750 mm; turret 12 positions with 12 driven tools. Specs: spindle speeds up to 6000 min-1 with stepless control to 4500 min-1; spindle power 25/18 kW; torque 280/202 Nm; supply 3x400V 50Hz; total power 36 kW; footprint L5300×W2300×H3650 mm. Equipment: chip conveyor, automatic loading/unloading, set of toolholders, status light, spare parts. Achieves tight tolerances; suited for automotive, aerospace, machine tools and medical. Pgedpfx Aeyxnyveg Tsi

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Pjdoyxnugspfx Ag Tegi

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Time recording from Feb. 2025 Operating hours = 16085 h Main spindle = 616 h Milling spindle = 369 h CNC control Siemens Sinumerik Si 840D sl Max. center distance 4500 mm Working height 1375 mm X-axis travel -15 +725 mm Y-axis travel -245 + 4756 mm Swing diameter over cross slide 780 mm Swing diameter over bed 820 mm C-axis, smallest increment +/-0.001° Main spindle A15 with BVG; 3135 N;/2000 rpm Spindle head DIN 55026 Form A 15 Max. speed 3000 rpm Max. torque 3135 Nm Drilling/milling unit Milling power (40/100% duty cycle) 36.5/29.8 kW Torque up to 1110 rpm (40/100% duty cycle) 328/261 Nm Max. spindle speed 5000 rpm Swivel range (B-axis) -105 +95° Vertical travel (Y-axis) -250 +250 mm SR5 steady rest with eccentric fine adjustment 45–310 mm C8 tool system Tool magazine (2 magazines) 144 Tailstock Quad diameter MK6 180 mm Quad stroke 170 mm Quad force (adjustable) 5–28 kN Pedjyxp H Depfx Ag Togi Quad fine adjustment +/- 0.15 mm Optional equipment Coolant tank capacity 990 l Workpiece measurement MC (Reinshaw) Software Gear hobbing &more