Used Torque Multiplier for sale (2,623)

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping Djdeygcyrjpfx Afpekh cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Dksdeygcu Aopfx Afpsh Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Year of construction: 1992, Voest-Alpine DA210/2 - Universal Lathe Distance between centers: 2000 mm Swing diameter: 420 mm Spindle bore: 52 mm - 3-axis digital readout - 4-jaw chuck Ø 250 mm - Multifix quick-change tool post - Coolant system - Work area lighting - Chip guard rear wall - Year of manufacture: 1992 Optional accessories: - Fixed steady rest (€650 excluding VAT) Technical Data - Center height over flat guideway: 210 mm - Center height from floor: 1090 mm - Bed width: 330 mm Main spindle: - Spindle nose according to DIN 55027: Size 6 - Spindle bore diameter: 52 mm - Front bearing diameter: 83 mm Dkedpsyc Sqrofx Afpeh - Internal taper: Metric 57 - Number of speed steps: 12 - Speed range: 33 - 1500 rpm - Max. torque: 900 Nm Tailstock: - Tailstock quill diameter: 65 mm - Morse taper: MT 4 Slide: - Leadscrew pitch: 6 mm - Tool shank cross section (HxW): 20 x 20 mm Working areas: - Swing over bed: 435 mm - Turning diameter over cross slide: 245 mm - Cross slide travel: 330 mm - Top slide travel: 130 mm - Tailstock quill travel: 120 mm Permissible workpiece weight: - Between centers: 500 daN - Unsupported in chuck: 150 daN Feeds: - Longitudinal feeds: 0.072 - 4.038 mm/rev - Cross feeds: 0.036 - 2.019 mm/rev - Metric threads: 0.05 - 28 mm - Inch threads: 56 - 1 TPI - Module threads: Mod 0.25 - 14 - D.P. threads: 112 - 2 TPI Electric drive: - Motor power: 5.5 kW - Rated motor speed: 1500 rpm Dimensions: - Machine dimensions (WxHxD): 3250 x 1700 x 1100 mm - Weight: approx. 1500 kg

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm Dkjdpfewrp Dpex Afpjh - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Dksdpfx Aevtzkxsfpeh Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg

Condition: used, Year of construction: 1995, Gildemeister CTX-200 - CNC Lathe - Gildemeister/DMG CNC control system - 3-jaw chuck, Ø 140 mm - 12-position tool turret with driven tools - Work area lighting - Chip conveyor - 10,810 operating hours - Including various tools - Including operating manuals and documentation - Year of manufacture: 1995 Technical specifications Working area: - Swing diameter over bed cover: 440 mm - Swing diameter over cross slide cover: 210 mm - Cross travel: 160 mm Dodpfx Afsxy R Uiepjkh - Longitudinal travel: 350 mm Spindle: - Spindle nose diameter: 120 mm h5 - Spindle nose diameter at front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power (100/50% duty cycle): 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5,000 rpm Feed system: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: incremental rotary encoder Tool turret: - Universal disc turret, automatic indexing, directional logic - Number of tool stations: 12 - Tool holder shank (DIN 69880): 20 mm - Tool indexing time per station (30°): 0.48 s Universal disc turret with driven tools: - Number of tool stations: 12 - Max. number of driven tools: 12 - Max. clamping diameter for driven tools: 12 mm - Drive power (100/50% duty cycle): 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (W x H x D): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2,950 kg Noise emission: - Constant workplace sound pressure level: 77 dBA

Condition: used, Year of construction: 2002, Burkhart & Weber MCX 900 – 4-Axis Machining Center - Siemens SINUMERIK 840D CNC control - Double pallet changer, pallet at loading station rotatable, total pallets: 6 - Rack-type tool magazine with 264 tool positions and tool setup station for loading during runtime - Rapid traverse X/Y/Z: 40 m/min / B-axis: 20 rpm - Max. machining force X/Y/Z: 20 kN / Tangential torque B-axis: 20,000 Nm - Renishaw wireless probing system - Year of manufacture: 2002 Technical Data Working ranges: - X-axis: 1,600 mm - Y-axis: 1,400 mm - Z-axis: 1,500 mm - B-axis: 360° / 0.001° Speeds: - Spindle speed: 20 – 6,000 rpm - Gear ranges (2): 20–1,400 / 1,401–10,000 rpm Feed rates and forces: - X/Y/Z-axis rapid traverse/feed: 40,000 mm/min / 20,000 N - B-axis speed/torque: 20 rpm / 20,000 Nm Tool magazine: - Magazine type: rack magazine - Number of tools: 264 Tools: - Max. tool weight: 60 kg - Max. tool length: 560 / 750 mm - Tool holder: DIN 69893 / HSK A-100 - Tool clamping force: 40 kN Dedpfxoxxbbwo Afpokh Pallets: - Pallet size: 800 x 1,000 mm - Pallet changer: double - Pallet weight: 800 kg - Max. allowable pallet weight: 3,150 kg - Pallet design: T-slots - Workpiece loading station: manually rotatable (4 x 90°) Coolant system: - Internal coolant (through tool): 30 l/min / 50 bar - External coolant: 200 l/min / 4 bar Drive power: - S1 operation 100% duty cycle: 37 kW - S6 operation 40% duty cycle: 50 kW Electrical: - Voltage: 3 x 400 V / 50 Hz +10% - Control voltage: 230 V AC / 24 V DC - Rated current: 130 A - Connected load: 65 kW / 75 kVA Hydraulics: - Tank: 240 l - Pressure: 60 bar Pneumatics: - Pressure: 4 – 6 bar - Consumption: 10 m³/h

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm Djdpfxjydl Dbj Afpokh z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Djdpfx Aoydl Awjfpjkh Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm Dksdpfx Afjygxy Uopoh turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Capacities / Travel distances: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Transverse (Z): 1,500 mm Clamping area NC rotary table: Indexing plate: 2,400 x 1,900 mm Max. load capacity (with centrical load): 10,000 kg Positioning accuracy arc/sec ±2.5” Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Type A Main spindle drive: Motor / manufacturer main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled), automatic gear shifting Spindle speeds: 6,000 rpm: low range rpm 0–738 medium range rpm 739–1,842 high range rpm 1,843–6,000 Axis drive / axis feed: Axis motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Max. working feed: X, Y, and Z axis 15,000 mm/min Max. mean acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Axis drive systems: X-axis (longitudinal) preloaded ball screw Ø 63 x 40 Z-axis (vertical) preloaded ball screw Ø 63 x 20 Y-axis (transverse) preloaded ball screw Ø 50 x 20 Guideway systems: X-axis (longitudinal) 6 pcs Type: INA RUE 55 EL Z-axis (vertical) 4 pcs Type: INA RUE 65 EL Y-axis (transverse) 8 pcs Type: INE RUE 55 E-HL plus additional damping unit Clamping table / Table surface: Djdpfx Afeygiwqjpjkh T-slot size 10x: 22 H12 mm Reference slot, center 1x: 22 H8 mm T-slot spacing: 150 mm (pitch of outer slots 1,800 mm) Weight: Weight RT3000 approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 stations Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with increased pressure to 37 bar ICS Special operating mode 4 RepairFIT is our proven package for a profitable entry into our product lines. Machines available in this line are sourced through a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any found defects and faults are professionally repaired by our expert service team.

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Maximum drive power, from 198 rpm: kW 30 Dksdoygipajpfx Afpeh Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Dkodpfx Afjw Rdthspeh Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: excellent (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly request that, for an offer to be made, you provide full identification along with a correct phone number and email address. EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital display Year of manufacture: 2007 with CE marking Centre distance: 700 mm Centre height: 170 mm Swing over bed Ø 340 mm Swing over cross slide Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound) swivel range: 60 / 120° Main spindle: Spindle mounting: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Front bearing spindle diameter: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40 - 3000 rpm Stepless speed control Number of mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at drive spindle: 640 Nm Dkjdpsxx S R Aefx Afpsh Feed: 20 (28) longitudinal feeds Z: 0.045 - 0.787 mm/rev 20 (28) cross feeds X: 0.023 - 0.406 mm/rev Threads: 20 (28) metric threads (standard) Pitch: 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MK 3 Quill stroke: 120 mm Offset: ±13 mm Permissible workpiece weights: (between centres) 50 kg, supported by tailstock 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and vocational training. Equipment: - EMCO 3-axis digital display with colour screen - Potentiometer, EMERGENCY STOP button, speed digital display on control panel next to digital display - 3-jaw chuck - MULTIFIX tool post head size B - Electrically interlocked chuck guard - Quick-collet clamping device - MICROJET coolant spray system - Chip guard (rear wall) - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026.

Condition: good (used), Please read the technical specifications in full. If this machine is a potential investment for you, we kindly request that you provide your complete credentials, including a valid telephone number and email address, in order to receive an offer. DECKEL Milling Machine – Toolroom Milling Machine DMU 35 M 3 x 2-axis CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001-2003 Travel ranges (X/Y/Z): 350 x 240 x 340 mm Stepless spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal swivel/rotary table: 400 x 290 mm Table load capacity: 100 kg Spindle nose/table distance: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data subject to change! Accessories/Equipment: - Direct path measuring system for 3 axes - Spindle drive via servomotor with toothed belt Dsdpfx Afsxz Rdaepjkh - 2 gearbox speed ranges - Full enclosure with sliding door - Swiveling control panel - Coolant nozzles on the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine levelling feet - Machine lamp - Serial interface RS232C, LAN (RJ45) This machine is perfect for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out for its versatility, featuring an additional manually operated rotary-swivel table, which allows 5-sided machining. Available from March 2026. A total of 3 machines available. Condition: good to very good, from a vocational training institute – see photos.

Condition: new, Year of construction: 2025, saw band length: 7,780 mm, saw band width: 54 mm, cutting speed: 80 mm/min, cutting width (max.): 1,050 mm, cutting height (max.): 580 mm, warranty duration: 24 months, power: 4,500 kW (6,118.29 HP), STANDARD FEATURES ·      HYDRAULIC VICE ·      COLUMN - LINEAR SLIDE ·      VARIABLE SPEED CONTROL (INVERTER) ·      SAFETY SWITCHES ·      HYDRAULIC SLIDE TENSIONING ·      VARIABLE ANGLE CUTTING BETWEEN 0 AND 60 DEGREES (POSITIVE DIRECTION) ·      VARIABLE ANGLE CUTTING BETWEEN 0 AND 45 DEGREES (NEGATIVE DIRECTION) ·      ANGLE SCALE ·      ADJUSTABLE HEAD LANDING SYSTEM ·      1 PIECE SAW BLADE ·      1 PIECE 2MT MATERIAL CARRYING TABLE ·      24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY ·      COUNTRY OF ORIGIN: TURKEY ·      MODELS PRODUCED BETWEEN 220 MM DIAMETER – 3000 MM DIAMETER TECHNICAL SPECIFICATIONS 580X1050 SY2DG Capacity 90° (mm) Capacity 90° (mm)  Round Round 580 mm Square Square 580 x 580 mm Dkedpfxovyycme Afpsh Rectangle Rectangle 580X1050 MM Capacity 60° (mm) Capacity 60° (mm) Round Round 480 mm Square Square 410 mm Rectangle Rectangle 300 x 530 mm Capacity 45° (mm) Capacity 45° (mm) Round Round 580 mm Square Square 580 x 580 mm Rectangle Rectangle 580 x 670 mm Main Motor / Torque Main motor / Torque 5.5 kW Hydraulic Motor Hydraulic Motor 1.1 kW Coolant Motor Coolant Motor 0.09 kW Band Saw Blade Size Blade Size 54x1.3x7780 mm Material Feeding Height Feeding Height 655 mm Vice Maximum Opening Vice Maximum Opening 1050 Vice Maximum Closing Vice Maximum Closing Table Width Rolled Table Width Height-Width-Length 3780x2240x1980 mm Weight 4100 KG

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, clamping force: 7,000 kN, screw diameter: 40 mm, total height: 2,500 mm, overall weight: 20,000 kg, This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. • 2 x 3-zone screws d50 / 32 hot runner control circuits • Max mold weight (total): 11000 kg / max mold weight per plate: 7300 kg / max distance of the molds center of gravity from clamping surfaces: 315 mm • Opening force (with pressure pad) kN 510 • Opening force: 130 kN • Platen size (H × V): 1510 × 1440 mm • Distance between tie bars (H × V): 1100 × 960 mm • Tie bar diameter: 175 mm • Max. mold weight: 11000 kg • Injection Unit 1 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s Dodjx D E Dtjpfx Afpokh • Injection rate: 281 cm³/s • Nozzle stroke: 600 mm • Heating wattage: 16 kW • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm • Injection Unit 2 • Injection capacity: 318 cm³ • L/D ratio (3-zone screw): 24 • Recovery rate (3-zone screw): 31 g/s • Injection rate: 281 cm³/s • Injection pressure (regenerative): 2400 bar • Nozzle stroke: 600 mm • Heating capacity: 16.2 kW • Number of heating zones incl. nozzle: 6 • Electric screw drive: 34 kW • Torque at 60% duty cycle: 903 Nm Dimensions Machine Depth 8500 mm

Condition: used, Year of construction: 2026, functionality: fully functional, Key Features Reinforced construction – A rigid, heavy frame minimizes vibrations and ensures stability even under intensive use. Accurate sanding thickness adjustment – A mechanical height gauge allows precise setting of the desired processing depth. Precisely balanced sanding drum – Made of drawn aluminum, it ensures even contact with the material and effective cooling during operation. Versatile application – Suitable for removing old paint, lacquer, rust, as well as for smoothing and deburring. Dodsygtqzepfx Afpekh Durable metal drive coupling – Reliable torque transfer from the motor to the sanding drum. Working width up to 920 mm – Ability to sand wide panels in two passes. Construction and Technology The Cormak MM3146 stands out with its robust, industrial-grade design. The main motor, rated at 1.5 / 2.2 kW (S1/S6), combined with a reinforced 60 W feed motor, provides ample power for demanding and continuous operations. The variable-speed feed system (0–4 m/min) allows for adjustment to material type and desired finish quality. The sanding belt (2100 × 75 mm) is driven by a high-speed drum (2800 rpm), allowing for quick and effective material removal. The sanding drum is self-cooling during operation, eliminating overheating issues. A reinforced side guide enhances parallelism and stability across the entire working width. Precision and Efficiency The Cormak MM3146 drum belt sander ensures consistent results thanks to its mechanical height adjustment system with a precision scale. It supports a minimum workpiece thickness of 3.5 mm and a maximum working height of 100 mm, allowing both thin boards and thick construction components to be processed. A working width of 460 mm in a single pass (or 920 mm with dual-feed operation) provides flexibility for both small and large batch production. Applications The Cormak MM3146 through-feed sander is suitable for use in: Joinery and furniture manufacturing workshops Wood restoration studios Metalworking shops for deburring Production of plastic components Surface finishing lines for flat materials Standard Equipment Precision aluminum sanding drum Metal drum drive coupling Worktable: 460 × 465 mm Conveyor belt: 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Ø62 mm dust extraction port Optional Accessories Dust extraction system with chip separator Sets of sanding belts in various grits Infeed roller table Mobile base with brake Choose performance and professional surface finishing. The Cormak MM3146 400V drum sander is a reliable partner for both batch and one-off production – choose quality that delivers efficiency. Technical Specifications Parameter Value Motor Power S1/S6 1.5 / 2.2 kW, 400V Belt Speed 2800 rpm (for wood and metal) Sanding Belt Size 2100 × 75 mm Feed Belt Size 1120 × 450 mm Worktable Dimensions 460 × 465 mm Dust Port Diameter Ø62 mm Feed Speed 0–4 m/min Min. Material Thickness 3.5 mm Max. Working Height 100 mm Working Width 460 (920) mm Feed Motor Power 60 W Machine Dimensions 880 × 540 × 1230 mm Net/Gross Weight 134 / 160 kg WARNING! THE MACHINE COMES FROM A RETURN. NO BASE, NO PACKAGING. NO WARRANTY PROVIDED.

Condition: excellent (used), Year of construction: 2006, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turn-milled components, featuring integrated spindle motors (ISM) on both main and counter spindles, equipped with a thermo-compensation system (liquid-cooled). Dedpfeyc Sa Hex Afpekh Drive power: Main spindle: 29 kW Counter spindle: 22 kW Speed range: Main spindle: 0–5000 rpm Counter spindle: 0–7000 rpm Spindle interface (DIN 55026): Main spindle KK6 (max. bar passage 65 mm) Counter spindle KK6 Y-axis: travel range +/- 50 mm The Y-axis is engineered so that resultant cutting forces are distributed over two axes, ensuring exceptional rigidity for all machining operations. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control. Includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through the counter spindle * 2 x 12-position tool turrets, VDI 30, radial with direction logic for up to 2 x 12 driven tool stations! Swivel speed adjustable via feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0–5000 rpm - C-axis for both main and counter spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished components * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinged belt") * Coolant unit integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar 2 pcs. flushing pumps, 3.7 bar * Control cabinet air conditioning * Electrostatic oil mist separator * Hydraulic unit * Machine lighting * Documentation IMPORTANT: Export/re-export outside the EU is subject to export license requirements. Year of manufacture: 2006 Includes bar feeder High-pressure pump for both tool turrets. Chip flushing for both main and counter spindles. The tool turret for the counter spindle is as new, replaced approx. 2 years ago. Both turrets: 12 x VDI 30 AWZ

Condition: good (used), Year of construction: 2016, HURCO VM10i vertical machining center, 3-axis Dedpfx Ajyhb N Iefpokh Year: 2016 MAX 5 control, 2 × 19" LCD color displays (text + graphics) TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table 762 x 406 mm Table load max: 682 kg T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose – table: 102 – 610 mm Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: SK40 Rapid traverse X,Y,Z-axis: 24 m/min Tool magazin: 20 positions Tool diameter max: 89 mm Tool length max: 250 mm Tool weight max: 7 kg Weight: 3000 kg Accessories/options: - Cooling flood through spindle with ICS (20 bar) - High-pressure cooling flood system - Spindle cooler - Chip auger - Software options as per photos Under power in our warehouse!

Condition: used, Year of construction: 2007, Technical details: x-travel: 480 mm y-travel: 400 mm z-travel: 430 mm control: Siemens 828 shopMill number of spindle speeds: 10000 U/min. max. torque on the spindle: 47,7 Nm spindle taper:: SK40 tool changer with: 20 Plätze table-size: 600x400 mm max. table load: 200 kg spindle drive: 7,5 kW rapid traverse:: 36 m/min interface: ja Vertical Machining Center with automatic pallet changer * Dkedsydn Nyjpfx Afpeh

Condition: used, Year of manufacture: 1980s Technical data: Travel X/Y/Z: 400 / 400 / 400 mm Dkedpfx Ajyfrf Iofpoh Tool holder: SK 40 Speed range: 40 - 4000 rpm Feed, stepless adjustable: 2 - 360 mm/min Rapid traverse: 4000 mm/min Swivel table: 700 x 460 mm, max. load 350 kg Tool changer: Number of tools: 20 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Equipment: - Control: CNC path control Deckel Dialog 11 - Hydromechanical clamping system SK 40 with drawbar according to DIN 69872 - Vertical and horizontal working spindle - Milling head manually swivels +/- 90° - Geometrically stepped direct drive for maximum torque - Milling performance at the working spindle

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Dkjdpfjyglw Tsx Afpsh Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: good (used), Year of construction: 2011, clamping force: 650 kN, screw diameter: 22 mm, displacement volume: 42 cm³, injection pressure: 2,864 bar, BATTENFELD HM 65-130 Stock no.: 503671 Manufacturer: BATTENFELD Model: HM 65-130 Control unit: UNILOG B6 Year of manufacture: 2011 Technical Data – Clamping Unit Clamping force: 650 kN Tie bar spacing (H x V): 370 x 320 mm Platen size (H x V): 550 x 500 mm Min. mold height: 225 mm Max. mold height: 675 mm Max. platen daylight: 675 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 26 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Max. mold weight: 600 kg Dkjdpfx Aoyglwmefpeh Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 41.8 ccm Injection pressure: 2,864 bar Screw L/D ratio: 20 l/d Screw stroke: 110 mm Screw speed: 398 rpm Screw torque: 238 N·m Free-flow shot weight (PS): 61 g/s Number of heating zones: 4 Nozzle stroke: 47 mm Dimensions & Weight Machine dimensions (L x W x H): 3.5 m x 1.4 m x 2 m Total weight: 3,000 kg Equipment Control panel language: German Hydraulic core pull: 2x Air valve: 1x Leveling elements Ethernet interface EUROMAP 13 interface Interface for temperature control unit Tool heating circuits: 6x

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Dedpsyglvpefx Afpjkh Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x