Used Tos Fn for sale (9,309)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, table load: 15,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 1,800 mm, spindle stroke: 800 mm, Tos Varnsdorf WHQ 13 CNC boring mill with: Kodpjwtmvxsfx Aabedu - X-axis travel 5000 mm - Y-axis (vertical) travel 3000 mm - Z-axis (cross) travel 2200 mm - W-axis (quill) travel 800 mm - rotary table size 2500 x 1800 mm - Heidenhain iTNC 530 CNC control - spindle speed 3000 rpm - 60-position tool magazine - high pressure through-spindle coolant - hinged belt chip conveyor - standard accessories included - year of manufacture 2012 - year of installation 2017 0% financing over 12/24 months available

Year of construction: 1990, condition: good (used), HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories Kdodpfjfg Ep Dox Aabou MARCELS MASCHINEN CH

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: Heidenhain iTNC 426, workpiece weight (max.): 9,000 kg, total height: 3,320 mm, total length: 9,660 mm, total width: 4,918 mm, spindle speed (min.): 11 rpm, spindle speed (max.): 2,500 rpm, The machine is currently disassembled and is undergoing refurbishment with the following scope of work: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the dedicated console balancing circuit - Milling head “O” – complete overhaul including replacement of gears - Replacement of the gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of the machine’s hydraulic circuits and replacement of solenoid valves - Addition of automatic gear lubrication in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic power unit - Overhaul of Indramat feed motors and the spindle motor - Repair and adjustment of Indramat drives - Overhaul of the electrical cabinet including control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of Heidenhain system cables and TNC 426 - Overhaul of the control panel - Overhaul of the Heidenhain TNC 426 control system, including keyboard and display unit - The machine will be fully functional and delivered with geometric accuracy documented by protocol - New machine paint in RAL 5005 and RAL 9010 color scheme. Technical Data Maximum spindle torque: 1,200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Total table area: 1,000 x 4,000 mm Number of T-slots/table pitch: 7/140 mm Slot width: 24H7 mm Table height from base: 900 mm Longitudinal travel (X): 4,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 900 mm Kdodpfx Aoxnkkaoabeu Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inner table edge: 80 mm Distance from vertical spindle axis to inner table edge: 100 mm Spindle taper: ISO 50 Retraction force of clamping mechanism: 16,100 N Horizontal spindle swiveling – bilateral: 180° Vertical spindle swiveling – bilateral: 180° Spindle head positioning: adjustable in 2.5° increments Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2,500 rpm Number of spindle speed steps: stepless Feed rate range: 1 to 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Condition: excellent (used), CATALOG NO. 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Saw blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. timber width: 870 mm - Min. timber length: 1500 mm From above: - Pawls - Driven shaft, toothed, metal - Pawls Kdodpfx Aelrvguoabsu - Driven shaft, toothed, metal - Pressure system - Saw shaft - 2 driven metal feed rollers, pneumatically pressed From below: - Guide rail - Metal sliding roller - Pawls - Track (caterpillar track) - Saw shaft - Track (caterpillar track) - Stepless feed speed control via inverter: 4–40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric raising/lowering of frame: 0.55 kW - Electric adjustment of saw shafts: 2 × 0.25 kW - Central lubrication - Extraction outlet diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg Included: - Centering device - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 × 1.5 kW - Upper pneumatic pressure system - Side pressure system - Dimensions (L/W/H): 4850 / 1100 / 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Manufactured in the Czech Republic – Two-shaft – Centering device – Operating & Maintenance Documentation (DTR) – Year of manufacture: 2010 – Used multi-blade saw, very good condition Net price: 262,900 PLN Net price: 61,860 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Kedpfx Aash U Rznobsdu Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: good (used), Year of construction: 2003, Ref. -No.: 10603 Manufacturer: TOS Kodpfsxhbt Sjx Aabedu Type: WRD 1500 Year of construction: 2003 Type of control: CNC Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Tschechien X-Travel: 10000 mm Y-Travel: 4000 mm Z-Travel: 1000 mm W-Axis: 800 mm V-axis travel: 2000 mm Spindle Diameter: 150 mm Max. Workpiece Weight: 25000 kg Tool Taper: ISO 50 DIN 68971 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Turning Speed - Stepless: 10 - 2500 RPM Feed Speeds X/Y/Z Axis: 1 - 8000 mm / min Drive Capacity - Spindle Motor: 60 kW Total Power Requirement: ca. 80 kW Internal cooling: 20 bar Rotary table diameter: 2500 x 3000 mm Support sleeve dimensions: 450 x 450 mm Rapid traverses Z + W: 12000 mm / min

Condition: good (used), Year of construction: 1981, Max. module 16 Min. module 4 Kedsv Urttjpfx Aabsdu Max. wheel diameter 1600 mm Mon. wheel diameter 800 mm Table load 700 kg Machine weight 19 t Dimensions L x W x H 4300 x 2000 x 3170

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 1,250 mm, turning length: 6,000 mm, overall weight: 11,940 kg, the machine is in very good condition Kdedpfjxpvbgex Aabou

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 426 Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Number of axis 5 Kdodpfxoxfculs Aabsu Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), CATALOGUE NUMBER 7653 Technical data: - track width 240mm - shaft width 260mm - max. blade diameter 300mm - blade hole diameter 70mm - max. cutting height with blade 350/400, 100mm - table top width with clearance 750mm - table top length 1530mm - from above: - pawls/deflectors - pulling shaft, toothed - pawls/deflectors - shaft with saws - sliding, pressure roller Kdodewmq Swopfx Aabou - from below: - guide - pawls/deflectors - caterpillar - feed motor 2.4kW - main motor 22kW - diameter of the extraction nozzle 2x160mm - overall dimensions l/w/h 2000x1530x1720mm - weight about 2080kg Net price: 23900 PLN Net price: 5630 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2005, table load: 15,000 kg, rotary table diameter: 1,600 mm, Specification Dimension of bed – width 1170 mm height 290 mm length 2000 mm Dimension of slide - width x length (with no extensions) 1340 x 1300 mm height over the sliding surface 320 mm Length of travel along the „W“ axis 500 mm Rotary table surface clamping dimensions Ø 1500 mm Centering hole 100 H7 mm Height of the rotary table from the sliding surface 590 mm Kodpfx Aow Uz S Aoabodu Number of clamping slots 9 Size of clamping T-slots. 22H7 Spacing of the T-slots 160 mm Speed of rotation smoothly controllable within the limits 1 ÷720 °/min Maximum centric load on the rotary table due to the workpiece mass 15000 kg Maximum eccentric load on the rotary table due to the workpiece weight (up to 750 mm distance of the workpiece center of gravity from the rotary table axis) 5000 kg Maximum rotary table bearing capacity – centre of gravity from table axis 500 mm Maximum torque on rotation 15000 Nm Maximum torque on stiffening 10000 Nm Maximum tilting moment to a plane perpendicular to clamping surface 15000 Nm Total time required for the table turning cycle through 360° 30 sec Working feed along the W-axis 1÷5000 mm.min-1 Fast feed along the W-axis 5000 mm.min-1 Oil working pressure (table stiffening) 5 MPa (drive pre-stressing) - MPa Table positioning accuracy Rotation Bilateral accuracy of the A-position setting by the ISO 230-2 16 µm Unilateral repeatability of the R-position setting by the ISO 230-2 8 µm Linear axis Bilateral accuracy of the A-position setting by the ISO 230-2 0,02 µm Unilateral repeatability of the R-position setting by the ISO 230-2 0,01 µm Table turning part peripheral accuracy ±0,01 mm

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Kdedsrwd Hzepfx Aabou Machine is operational and in good condition

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Kodpsurv E Defx Aabjdu

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Kjdpfjw Nmw Hjx Aabodu Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2007, 1 used cylindrical grinding machine, manufacturer Tos BHU 25 Year of manufacture: 1984 / complete retrofit at Tos in 2007 Technical Specifications: Center distance: 600 mm Swing diameter: 280 mm Max. longitudinal travel: 600 mm Max. transverse travel: 245 mm Grinding wheel: Diameter: 400 mm Width: 40 mm Bore: 127 mm Max. wheel width: 63 mm Max. workpiece weight between centers: 60 kg Grinding wheel speed: Number of steps: 2 From: 1570 rpm To: 2050 rpm Swiveling grinding head: +/-60° Workpiece headstock: Speeds: Number of steps: 12 From: 22 rpm To: 710 rpm Swivel range: 90° Spindle taper: 4 Morse taper Tailstock quill taper: 3 Morse taper Kdsdpfx Aaoxgbbgjbsu Maximum table swivel: +/- 7° Electrical connection: 50 Hz 3-phase 380 Volt External grinding spindle motor: 4 kW Total power requirement: 8 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 1600 mm Width: 1400 mm Height: 1300 mm Various accessories: Tailstock with fine adjustment Coolant system Various grinding wheels with flange

Condition: excellent (used), CATALOGUE NUMBER 7480 Technical data: - track width 360mm - shaft width 350mm - max. disc diameter 350mm - disc hole diameter 80mm - max. cutting height 120mm - table top dimensions 2040x1220mm from above: - pawls - pulling shaft, toothed - pawls - shaft with saws - sliding, pressure shaft from below: - rollers in front of the table top, 2pcs - guide - pawls - caterpillar - central caterpillar lubrication - electric lifting of the shaft with saws - electric lifting of the body - smooth adjustment of the feed speed - diameter of the extraction nozzle 140mm, 160mm - main engine 30kW - overall dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES - Czech production - used multisaw - very good condition Net price: PLN 37,900 Net price: EUR 8,900 depending on the price of EUR 4.25 Ksdsuzu T Tspfx Aabsdu (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 2005, Immediately available from site: CNC Cylindrical Grinding Machine TOS HOL – MONTA Type UN 63 / 750 / 2000 Year of manufacture: 2005 CNC Control: Sinumerik 840 Di Centre height: 375 mm Grinding diameter: 750 mm Grinding length: 2000 mm Grinding wheel dimensions: 750 x 100 x 305 mm Swing diameter in open steady rest: 40 – 250 mm Tailstock Morse taper: 6 Table swivelling: 4 degrees Workpiece spindle speed range: stepless, 1 – 50 rpm Grinding wheel speed: 20 – 33 m/sec Grinding spindle motor: 19 kW Total power requirement: 41 kW Workpiece diameter control Full enclosure Grinding mist extraction Weight: 20 t Complete accessories Price: EUR 28,500.— plus VAT, ex site Kdodpfx Aasxn R E Rsbsu

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4300 mm Measurements depth 3450 mm Measurements height 2265 mm Machine weight 5850 kg Workpiece Workpiece weight 20000 kg Additional Equipment Automatic setup for climb milling This 3-axis TOS FGS63T Plus was manufactured in 2008. It features a robust table clamping area of 630 x 1800 mm, a maximum spindle torque of 1600 Nm, and a spindle speed up to 2800 rpm. With a maximum workpiece weight capacity of 20,000 kg and automatic tool clamping, this vertical machining centre is ideal for heavy-duty milling. Consider the opportunity to buy this TOS FGS63T Plus vertical machining centre. Contact us for more information. Application Types Ksdpfx Aasxfcm Uobodu Milling

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Kdjdpslz Nxwofx Aabju Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic Kodpfx Aow Iu Nhsabsdu X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), functionality: fully functional, Table dimensions: 1,000 × 320 mm Kdsdpfx Aaexn T Unobou Travel (X / Y / Z): 720 / 360 / 420 mm Spindle taper / mount: ISO 40 with hydraulic clamping Spindle speed: 45 – 2,240 rpm, 18 speeds Main motor power: 5.5 kW Total machine power: 8.0 kVA Machine weight: approx. 2,400 kg 3-axis digital readout Complete with equipment for horizontal milling as well Feed rates: 16 to 1,000 mm per minute Feeds and rapid traverse on all axes Dimensions (L × W × H): 1,900 × 2,100 × 2,000 mm Year of manufacture: 1995 Machine is delivered with various accessories – see photos for details. Note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend checking all relevant details. Financial information VAT/margin: Margin scheme: The displayed price includes VAT (VAT not deductible for businesses).

Condition: excellent (used), CATALOGUE NUMBER 6913 Kdodpokytcxefx Aabeu TECHNICAL DATA - track width 360mm - shaft width 350mm - max. disc diameter 350mm - disc hole diameter 80mm - max. cutting height 120mm from above: - pawls - pulling shaft, toothed - pawls - smooth sliding shaft - shaft with saws - sliding, pressure shaft from below: - 2 sliding rollers in front of the table - guide - pawls - caterpillar - central caterpillar lubrication - electric lifting of the shaft with saws - electric lifting of the body - smooth regulation of the feed speed - feed motor approx. 2.5kW - main motor 30kW - overall dimensions L/W/H 2500x2300x1900mm - weight about 4000kg ADVANTAGES - Czech production - 2 sliding rollers in the table - used multi-saw - very good condition Net price: PLN 38900 Net price: EUR 9150 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Max turningdia -- passage: 1700 mm Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Kjdpexgv Rcefx Aabjdu Long: 4550 mm Wide: 2670 mm

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm Kdodeu Nkm Eopfx Aabeu *

Condition: good (used), Technical specifications: -table surface: 400 x 1400 mm - longitudinal movement of the table - X axis: 1000 mm - lateral movement of the table - Z: 450 mm -vertical table movement - Y axis: 400 mm -spindle cone: ISO 50 -Spindle speed: 35.5 - 1800 rpm Kjdpjv E Nafofx Aabjdu total machine power: 11 kW